| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Previous issue > Previous issue



Table of Contents | June, 2017  Vol. 55   No.6 Previous Issue | Next Issue | Archive
In this issue:

Research Papers
372 Growth Behavior of Intermetallic Compound in Dissimilar Al-Cu Joints Under Direct Current
알루미늄-구리 이종 도체 접합부에서 직류 전기 인가에 따른 금속간화합물의 성장 거동
Jeong-Ik Kim, Sung-woo Jin, Jinwook Jung, Hyun-Min Sung, Hye-Jin Jeong, Siwook Park, Ju-Won Park, Heung Nam Han
김정익, 진성우, 정진욱, 성현민, 정혜진, 박시욱, 박주원, 한흥남
Korean J. Met. Mater. 2017;55(6):372-378.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.372

Abstract
Aluminum conductors are increasingly replacing copper because Al has lower cost and lighter weight, and consequently the demand for Al-Cu joints for industrial applications is growing. However, an intermetallic compound is known to grow at the Al-Cu interface, and will result in fracture if it grows above a critical thickness...... More

         Cited By 1
379 Effect of Microstructure on HIC Susceptibility of API X70MS Linepipe Steel
API X70MS 라인파이프용 강의 수소유기균열 감수성에 미치는 미세조직의 영향
Joon-Ho Sung, Ho-Seop Sim, Byung-Gyu Park, Kyung-Mox Cho
성준호, 심호섭, 박병규, 조경목
Korean J. Met. Mater. 2017;55(6):379-385.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.379

Abstract
The resistance of hydrogen induced cracking (HIC) was investigated with different microstructures of API X70MS steel. Ferrite/acicular ferrite (F/AF), deformed ferrite/acicular ferrite, ferrite/bainite (F/B) and single acicular ferrite (AF) were obtained by thermo-mechanical controlled process (TMCP) with changing rolling and cooling conditions. HIC resistance was found to be affected by..... More

      
386 Microstructure and High Temperature Plastic Deformation Behavior of Al-12Si Based Alloy Fabricated by an Electromagnetic Casting and Stirring Process
전자기주조법으로 제조된 Al-12Si계 합금의 미세조직 및 고온 소성변형 거동
Kyung-Soo Jeon, Heung-Ryeol Roh, Mok-Soon Kim, Jong-Ho Kim, Joon-Pyo Park
전경수, 노흥렬, 김목순, 김종호, 박준표
Korean J. Met. Mater. 2017;55(6):386-395.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.386

Abstract
An as-received EMC/S (electromagnetic casting and stirring)-processed Al-12Si based alloy billet was homogenized to examine its microstructure and high temperature plastic deformation behavior, using compressive tests over the temperature range from 623 to 743 K and a strain rate range from 1.0×10-3 to 1.0×100s-1. The results were compared with samples..... More

      
396 Influence of Ultrasonic Melt Treatment and Cooling Rates on the Microstructural Development and Elevated Temperature Mechanical Properties of a Hypereutectic Al-18Si-4Cu-3Ni Piston Alloy
초음파 용탕 처리 및 냉각속도가 Al-18Si-4Cu-3Ni 피스톤용 합금의 미세조직과 고온인장특성에 미치는 영향
Jea-Hee Yoon, Young-Hee Cho, Jae-Gil Jung, Jung-Moo Lee, Ik Min Park
윤재희, 조영희, 정재길, 이정무, 박익민
Korean J. Met. Mater. 2017;55(6):396-404.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.396

Abstract
The influence of ultrasonic melt treatment (UST) combined with a change in cooling rates on the microstructure and elevated temperature mechanical properties of a hypereutectic Al-18Si-4Cu-3Ni piston alloy was investigated. Microstructural observation confirmed that UST effectively refined the sizes of primary Si and intermetallic compounds (e.g. ε-Al3Ni) while promoting their..... More

         Cited By 1
405 Solvent Extraction of Tungsten(VI) from Moderate Hydrochloric Acid Solutions with LIX 63
Hoai Thanh Truong, Yong Hwan Kim, Man Seung Lee
Korean J. Met. Mater. 2017;55(6):405-411.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.405

Abstract
The solvent extraction of tungsten(VI) from hydrochloric acid solutions using 5,8-diethyl- 7-hydroxydodecan-6-one oxime (LIX 63) was analyzed in solutions having an initial pH range from 2 to 5, by varying the concentration of metal and extractant. In our experimental range, the cationic exchange reaction as well as the solvation reaction..... More

      
412 Calculation of Inductance, Capacitance, and Microwave Absorbance of Modified Square Loop Frequency Selective Surface
변형된 사각 루프 주파수 선택 표면의 인덕턴스, 커패시턴스 계산 및 전파흡수특성
Tian Liu, Sung-Soo Kim
류전, 김성수
Korean J. Met. Mater. 2017;55(6):412-418.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.412

Abstract
The square loop (SL) is the typical pattern of a frequency selective surface (FSS) with high inductance (L) and capacitance (C). In this study, modified patterns including split square loop FSS (SSL-FSS) and I-type FSS (I-FSS) are proposed, and their L and C values were estimated using the equivalent circuit..... More

      
419 Capture and Solidification of Rare Earth Nuclide (Nd) in LiCl-KCl Eutectic Salt Using a Synthetic Inorganic Composite
무기합성매질을 이용한 LiCl-KCl 공융염 내 희토류 핵종(Nd)의 포집 및 고화
Na-Young Kim, Hee-Chul Eun, Hwan-Seo Park, Do-Hee Ahn
김나영, 은희철, 박환서, 안도희
Korean J. Met. Mater. 2017;55(6):419-426.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.419

Abstract
In this study, neodymium (Nd) nuclides in LiCl-KCl eutectic salts were captured and solidified using a synthetic inorganic composite (Li2O-SiO2-Al2O3-B2O3), a process that allows the selective capture of Nd and fabrication of a composite with Nd captured from waste, without additional additives or mixing. The Nd nuclides in the LiCl-KCl..... More

      
427 Effects of Cu-doping on the Power Factor of Bi0.42Sb1.58Te3 Thermoelectric Compounds Prepared by Hot Pressing
열간 압축 방법으로 제작된 Bi0.42Sb1.58Te3 열전소재 복합체에서 Cu 도핑이 출력인자에 미치는 효과에 대한 연구
Young Soo Lim, Minseok Song, Soonil Lee, Won-Seon Seo
임영수, 송민석, 이순일, 서원선
Korean J. Met. Mater. 2017;55(6):427-431.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.427

Abstract
We report the effects of incorporated Cu on the thermoelectric transport properties of Bi0.42Sb1.58Te3 compounds prepared by the hot pressing method. The hole concentration in the compound increased significantly with the increase in the Cu content. The acceptor role of Cu was manifested by Hall measurements and also by the..... More

         Cited By 1
432 Fabrication and Characterization of Ge2Sb2Te5 Nanowire Arrays and PEDOT: PSS Hybrid Thermoelectric Composites
Ge2Sb2Te5 nanowire arrays와 PEDOT: PSS를 이용한 유・무기 열전 복합소재 합성 및 특성평가
Sang-Hyun Roh, Jiwon Kim, Woon-Ik Park, Yang-Do Kim, Jae-Hong Lim
노상현, 김지원, 박운익, 김양도, 임재홍
Korean J. Met. Mater. 2017;55(6):432-439.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.432

Abstract
Hybrid organic/inorganic composites have recently been investigated in the thermoelectric field in an effort to interdependently manipulate the charge carriers, which are interconnected with electrical and thermal transport. The decoupling of a charge carrier’s roles in the hybrid structures can result in enhanced thermoelectric performance, by only exploiting the high..... More

      
440 Properties of the Catalytic Nickel Silicides for a Dye-Sensitized Solar Cell
염료감응형 태양전지용 니켈실리사이드 촉매재료의 물성 연구
Taeyeul Park, Kwangbae Kim, Ohsung Song
박태열, 김광배, 송오성
Korean J. Met. Mater. 2017;55(6):440-445.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.440

Abstract
We have investigated the properties of nickel silicides as catalysts for dye-sensitized solar cells (DSSCs) by preparing several nickel silicide layers with a 100 nm-Ni/Si (100) structure using silicidation annealing for 30 minutes at 300 ℃ – 900 ℃. X-ray diffraction (XRD), four-point probe, field emission scanning electron microscope (FE-SEM),..... More

      
446 Thermal Properties of Two-Layered Materials Composed of Polymer Layer Embedded with AlN Particles on Al Substrate along the Thickness Direction
AlN입자 함유 폴리머 후막을 Al기판에 형성한 2층 층상재료의 두께 방향에 대한 열전도 특성
Jong-Gu Kim, Jae-Hoon Ju, Byung-Dong Hahn, Sang-Hee Park, Young-Rae Cho
김종구, 주재훈, 한병동, 박상희, 조영래
Korean J. Met. Mater. 2017;55(6):446-452.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.446

Abstract
The thermal properties of two-layered materials composed of a polymer layer embedded with dielectric AlN particles (AlN composite) coated on top of an aluminum (Al) substrate were investigated by light flash analysis (LFA). The thermal conductivity of the specimens was measured as a function of the AlN composite volume fraction..... More

      
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community