Abstract
A stripping solution with thiourea, iron(III) sulfate, and sodium dodecyl sulfate(SDS) was employed to strip Ni-based 14 karat white gold alloys, and the formation of the NiS byproduct and elimination of passivation were investigated in the presence of 0.0-0.2 g/L SDS. White gold alloy samples with a flat shape were..... More

Abstract
Tungsten carbides are quite attractive for their superior properties, e.g., high melting point, high hardness, high thermal and electrical conductivities, and relatively high chemical stability. Tungsten carbides with a binder metal, for example Co or Ni, are mainly used to produce cutting tools, nozzles and molds in the composite form...... More

Abstract
The microstructure and mechanical properties of a newly developed, β-phase containing TiAl alloy have been studied through hot working and post heat treatment to enhance room temperature ductility and strength. The controlled microstructures hadthree types of structure, fully lamellar, nearly lamellar and duplex, and were produced by cyclic heat-treatment in..... More

Abstract
We report on the phase transition behavior and thermoelectric transport properties of Zn-doped Cu₂Se. Cu₂Se is comprised of nontoxic, low-cost and abundant elements, and has been attracting attention because of its very high thermoelectric performance, ZT, at high temperatures. Many studies have reported enhanced ZT in impurity doped Cu₂Se, however,..... More

Abstract
The subject of this study was a bronze sword excavated from the early Iron Age area of Sinpung site in Wanju. SEM-EDS, FE-EPMA and Raman Micro-Spectroscopy analysis methods were applied to investigate the manufacturing techniques and corrosion characteristics. The results of the analysis indicated a casting structure composed of both..... More

Abstract
Polycrystalline diamond compact (PDC) has excellent wear resistance, high impact resistance, superior fatigue properties, and has been used in the oil and gas drilling industries. This study investigated the effect of Co leaching on the microstructure, vertical turning lathe (VTL) wear properties of PDCs manufactured by high-temperature and high-pressure (HTHP)..... More

Abstract
Cu-Ni-Si alloys were strengthened by Ni₂Si intermetallic compound precipitation in a Cu matrix during aging. The Cu-6 wt% Ni-1.4wt%Si alloy was prepared by water quenching (solution treatment) or air cooling (homogenization treatment) after heating 980 ^oC for 2 hours and aging at 500 ^oC for 6 hours. After maintaining a..... More

Abstract
This study examined the effect of alkalis on lyocell-based activated carbon fibres (ACFs) with high Brunauer-Emmett-Teller (BET) surface areas, using X-ray diffraction (XRD). Here, alkali treatments were conducted using 10 ~ 25 % NaOH and KOH on lyocell samples for 3 h at ambient room temperature. A secondary treatment with..... More

Abstract
The properties and H₂O adsorption characteristics of two types of zeolites (3A and 13X) with the same shape but different element composition were identified. These zeolites are used in gas purification processes to manufacture 9N ultra-pure inert gases for semiconductor process applications. To analyze the shape and microstructure of the..... More