Abstract
New technologies need to be developed in the ironmaking process to reduce carbon dioxide emissions. To achieve this, in recent years steelmakers have been working to reduce coke usage by increasing thermal energy efficiency. However, it is very difficult to reduce coke consumption while maintaining production, because the level of..... More

Abstract
The powder-alloyed metallic sheet foam manufacturing process has the advantage of being able to control pore shape, size, and distribution more easily and homogeneously than conventional foam manufacturing processes. The effects of strain rate and tensile direction on the mechanical properties of Ni-Cr-Al superalloy foam fabricated by powder alloying method..... More

Abstract
Pores and cracks are known as the main defects in metal additive manufacturing (MAM), including directed energy deposition(DED). A gaseous fume is often produced by laser flash (instantaneous high temperature) during laser processing, which may cause various defects such as porosity, lack of fusion, inhomogeneity, low flowability and composition change,..... More

Abstract
PFC gas is primarily used during the etching process in the manufacture of ULSIs and in cleaning after CVD processes. PFC is classified as a greenhouse gas that stays in the atmosphere for a long time and has a high GWP. High capacity and high integration have been achieved in..... More

Abstract
In this study, solidification cracking behavior and susceptibility in dissimilar cladding of Inconel alloy FM 52, 308L stainless steel to carbon steel, was investigated by submerged arc welding and transverse−Varestraint testing with gas tungsten arc welding. The effect of cladding conditions on cracking behavior and susceptibility was extensively evaluated, and..... More

Abstract
Electropulse-induced heating has attracted attention due to its high energy efficiency. However, the process gives rise to a nonlinear temperature variation, which is difficult to predict using a traditional physics model. As an alternative, this study employed machine-learning technology to predict such temperature variation for the first time. Mg alloy..... More

Abstract
Ionic liquids have emerged in hydrometallurgy as potential extractants for metals. In this work, the interactions of ALiCY (R₄N⁺A^-) synthesized by Aliquat336 and Cyanex272, and a mixture of ALiCY and TBP, were analyzed using extraction data and FT-IR spectroscopy. Co(II) and Ni(II) were extracted from two HCl concentrations (1.0×10^-4 and..... More

Abstract
Technologies for pedestrian safety are increasingly emphasized by Automakers in advance of autonomous driving vehicles. A Night Vision System attached behind the front grille can reduce fatal accidents, especially during the nighttime, however, consumers may hesitate to adopt such systems on account of their high price. High-cost Germanium is used..... More

Abstract
In this study, we report how Cu doping can modify the thermoelectric performance of p-type Bi_0.5Sb_1.5Te3 and Bi_0.4Sb_1.6Te3 thermoelectric alloys, including their electronic and thermal transport properties. For electronic transport, the power factors of both Bi_0.5Sb_1.5Te3 and Bi0.4Sb1.6Te3 compositions were increased by Cu doping. The origins of the enhanced power..... More