Korean Journal of Metals and Materials

Korean Journal of Metals and Materials Search

> Browse Articles > Search

Comparison of Weldability and Microstructure in Resistance Spot Welding of Aluminum 5052-H32 Alloy and Al 6014-T4 Alloy
알루미늄 5052-H32 합금과 6014-T4 합금의 저항 점 용접 시 용접성 및 미세조직 비교

Hyun-Uk Jun, Jaehun Kim, Wonho Kim, Jooyong Cheon, Ki-Man Bae, Eun-Kyung Lee, Yeong-Do Park, Changwook Ji
전현욱, 김재훈, 김원호, 천주용, 배기만, 이은경, 박영도, 지창욱

Korean J. Met. Mater. 2024;62(1):1-11. Published online 2023 Dec 29
DOI: https://doi.org/10.3365/KJMM.2024.62.1.1

Abstract
This study was performed to compare the resistance spot weldability of Al 5052-H32 alloy and Al 6014-T4 alloy, and the cause of the differences in the weldability was investigated. In general, the surface of the aluminum alloy has an oxide film several nm thick, and local heat input is generated..... More

The Effect of Preheating Current on the Melting Behavior of Bolt Projection Welding of Al-Si Coated Hot-Stamped Boron Steel
Al-Si 도금된 핫스탬핑 보론강의 볼트 프로젝션 용접시 예열 통전이 용융 거동에 미치는 영향

Jae-Hun Kim, Hyun-Uk Jun, Joo-Yong Cheon, Jae-won Kim, Jae-deuk Kim, Changwook Ji
김재훈, 전현욱, 천주용, 김재원, 김재득, 지창욱

Korean J. Met. Mater. 2021;59(12):893-903. Published online 2021 Nov 19
DOI: https://doi.org/10.3365/KJMM.2021.59.12.893

Abstract
This study evaluated the effect of preheating on early stage melting behavior of a Al-Si coated hot stamped boron steel bolt during projection welding. A large amount of heat was generated in the early stage of projection welding. Because of the large heat generation, a rapid collapse of the projection..... More

Crossref 2

Effect of Electrode Patterning on Melting Behavior and Electrode Degradation in Resistance Spot Welding of A6014-T4 Alloy
A6014-T4 합금 소재의 저항 점 용접 시 용융 거동 및 전극 열화에 미치는 전극 패터닝 효과

Hyun-Uk Jun, Jae-Hun Kim, Jae Won Kim, Eun-Kyung Lee, Yang-Do Kim, Changwook Ji
전현욱, 김재훈, 김재원, 이은경, 김양도, 지창욱

Korean J. Met. Mater. 2020;58(12):863-874. Published online 2020 Dec 4
DOI: https://doi.org/10.3365/KJMM.2020.58.12.863

Abstract
In this study, the effects of electrode surface design on the resistance spot weldability and degradation of the electrode following resistance spot welding (RSW) of aluminum 6014-T4 alloy were investigated. A new patterning method that can be produced through repetitive pressurization was applied to the electrode, producing a lattice-like pattern..... More

Web of Science 4 Crossref 5

1 |

Journal Impact Factor 1.2

The Korean Institute of Metals and Materials

Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071 FAX: +82-2-557-1080 E-mail: metal@kim.or.kr

About | Browse Articles | Current Issue | For Authors and Reviewers