Articles citing Korean Journal of Metals and Materials and cited articles from Korean Journal of Metals and Materials by CrossRef/DOI Metadata articles
Cited articles Citing articles
No. authors title year vol no fpage doi authors article title journal title year vol no fpage doi
1 Yujin Seong, Youngkyu Kim, Im Doo Jung, Sungho Kim, See Jo Kim, Seong-Gon Kim, Hak Jun Kim, Seong Jin Park Material Characterization of Single Crystalline Cu Subjected to High Strain Rates and High Temperatures for Multiscale Simulation 2017 55 11 760 10.3365/KJMM.2017.55.11.760 Wooyeol Kim, Dong-Hyun Ahn, Jae Ik Yoon, Lee Ju Park, Hyoung Seop Kim Effect of target-fixture geometry on shock-wave compacted copper powders Metals and Materials International 2018 24 1 84 10.1007/s12540-017-7344-y
2 Minju Kang, Jong Woo Won, Ka Ram Lim, Sang Hyeop Park, Seong Moon Seo, Young Sang Na Microstructure and Mechanical Properties of As-cast CoCrFeMnNi High Entropy Alloy 2017 55 10 732 10.3365/KJMM.2017.55.10.732 Compositional Approach to Designing Fcc High-Entropy Alloys that Have an Enlarged Equiaxed Zone Metals 2018 8 1 54 10.3390/met8010054
3 Daehan Jang, Kwangyoon Kim, Hyoung Chan Kim, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim Evaluation of Mechanical Property for Welded Austenitic Stainless Steel 304 by Following Post Weld Heat Treatment 2017 55 9 664 10.3365/KJMM.2017.55.9.664 Tae-Hoon Nam, Eunsol An, Byung Kim, Sunmi Shin, Won-Seok Ko, Nokeun Park, Namhyun Kang, Jong Jeon Effect of Post Weld Heat Treatment on the Microstructure and Mechanical Properties of a Submerged-Arc-Welded 304 Stainless Steel Metals 2018 8 1 26 10.3390/met8010026
4 Barton Mensah Arkhurst, Jin-Ju Park, Chang-Hoon Lee, Jeoung Han Kim Direct Laser Deposition of 14Cr Oxide Dispersion Strengthened Steel Powders Using Y2O3 and HfO2 Dispersoids 2017 55 8 550 10.3365/KJMM.2017.55.8.550 René Streubel, Markus B. Wilms, Carlos Doñate-Buendía, Andreas Weisheit, Stephan Barcikowski, Johannes Henrich Schleifenbaum, Bilal Gökce Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition Japanese Journal of Applied Physics 2018 57 4 040310 10.7567/JJAP.57.040310
5 Yong Jung Kwon, Ali Mirzaei, Han Gil Na, Sung Yong Kang, Myung Sik Choi, Jae Hoon Bang, Jaegab Lee, Inpil Kang, Sang Sub Kim, Hyoun Woo Kim Effect of E-Beams Irradiation Dose on the Sensing Properties of Pt-Functionalized Reduced Graphene Oxides Following Annealing of the 6 nm-Thick Pt Layer 2017 55 7 492 10.3365/KJMM.2017.55.7.492 Jae-Hyoung Lee, Jin-Young Kim, Jae-Hun Kim, Ali Mirzaei, Hyoun Woo Kim, Sang Sub Kim Synthesis and gas sensing properties of membrane template-grown hollow ZnO nanowires Nano Convergence 2017 4 1 10.1186/s40580-017-0121-2
6 Hyun Hwa Park, Jun Yun Kang, Heon-Young Ha, Tae-Ho Lee, Hyun Uk Hong Acceleration of Nano-Sized NbC Precipitation and Improvement of Creep Resistance in Alumina-Forming Austenitic Stainless Steel via Cold Working 2017 55 7 470 10.3365/KJMM.2017.55.7.470 Min-Ho Jang, Jun-Yun Kang, Jae Hoon Jang, Tae-Ho Lee, Changhee Lee Microstructure control to improve creep strength of alumina-forming austenitic heat-resistant steel by pre-strain Materials Characterization 2018 137 1 10.1016/j.matchar.2018.01.005
7 Jeong-Ik Kim, Sung-woo Jin, Jinwook Jung, Hyun-Min Sung, Hye-Jin Jeong, Siwook Park, Ju-Won Park, Heung Nam Han Growth Behavior of Intermetallic Compound in Dissimilar Al-Cu Joints Under Direct Current 2017 55 6 372 10.3365/KJMM.2017.55.6.372 Ju-Won Park, Hye-Jin Jeong, Sung-Woo Jin, Moon-Jo Kim, Kyooyoung Lee, Jae Joong Kim, Sung-Tae Hong, Heung Nam Han Effect of electric current on recrystallization kinetics in interstitial free steel and AZ31 magnesium alloy Materials Characterization 2017 133 70 10.1016/j.matchar.2017.09.021
8 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Wei Dong Xing, Man Seung Lee, Young Hwan Kim Separation of gold(III) from hydrochloric acid solution containing platinum(IV) and palladium(II) by solvent extraction with Cyanex 272 and LIX 63 Journal of Industrial and Engineering Chemistry 2018 59 328 10.1016/j.jiec.2017.10.039
9 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Hoai Thanh Truong, Man Seung Lee, Gamini Senanayake Separation of Pt(IV), Rh(III) and Fe(III) in acid chloride leach solutions of glass scraps by solvent extraction with various extractants Hydrometallurgy 2018 175 232 10.1016/j.hydromet.2017.12.005
10 Ji-Yeon Park, Mi-Song Kim, Chulmin Oh, Sang Hyeon Do, Jong Dock Seo, Dae Keun Kim, Won Sik Hong Solder Joint Fatigue Life of Flexible Impact Sensor Module for Automotive Electronics 2017 55 4 232 10.3365/KJMM.2017.55.4.232 C. Han, J.-H. Lee, Y.S. Choi, S.-H. Park, S. Park Effects of external operating environments on fatigue of heat-exchanger copper tubes Fatigue & Fracture of Engineering Materials & Stru 2018 41 7 1546 10.1111/ffe.12795
11 Ji-Yeon Park, Mi-Song Kim, Chulmin Oh, Sang Hyeon Do, Jong Dock Seo, Dae Keun Kim, Won Sik Hong Solder Joint Fatigue Life of Flexible Impact Sensor Module for Automotive Electronics 2017 55 4 232 10.3365/KJMM.2017.55.4.232 Yujin Park, Jung-Hwan Bang, Chul Oh, Won Hong, Namhyun Kang The Effect of Eutectic Structure on the Creep Properties of Sn-3.0Ag-0.5Cu and Sn-8.0Sb-3.0Ag Solders Metals 2017 7 12 540 10.3390/met7120540
12 Ji-Hwan Shin, Nabeel Jahanzeb, Min-Seong Kim, Ji-Hyun Hwang, Shi-Hoon Choi Analysis of Deformation and Failure Behaviors of TIG Welded Dissimilar Metal Joints Using Miniature Tensile Specimens 2017 55 2 125 10.3365/KJMM.2017.55.2.125 Jaimyun Jung, Jae Ik Yoon, Jung Gi Kim, Marat I. Latypov, Jin You Kim, Hyoung Seop Kim Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy npj Computational Materials 2017 3 1 10.1038/s41524-017-0023-1
13 Injin Sah, Jong-Bae Hwang, Sun-Ig Hong, Eung-Seon Kim, Min-Hwan Kim Effect of Heat Treatment on the Diffusion-Bonded Ni-Base Alloy Hastelloy X 2017 55 2 115 10.3365/KJMM.2017.55.2.115 Minju Kang, Jaeyeong Park, Seok Su Sohn, Dong-Hyun Ahn, Hyoung Seop Kim, Won Tae Cho, Kwang-Geun Chin, Sunghak Lee Dynamic tensile behavior of twinning-induced plasticity/low-carbon (TWIP/LC) steel clad sheets bonded by hot rolling Materials Science and Engineering: A 2017 700 387 10.1016/j.msea.2017.06.003
14 Byunggu Kim, Jae-Young Leem Effects of Doping Concentration on the Structural and Optical Properties of Spin-Coated In-doped ZnO Thin Films Grown on Thermally Oxidized ZnO Film/ZnO Buffer Layer/Mica Substrate 2017 55 1 67 10.3365/KJMM.2017.55.1.67 Atanu Bag, Ki-Seong Park, Shi-Hoon Choi Effects of microcrack evolution on the electrical resistance of Cu thin films on flexible PI substrates during cyclic-bend testing Metals and Materials International 2017 23 4 673 10.1007/s12540-017-6735-4
15 Won-Jong Ji, Seong-Hoon Lee, Young-Hoon Moon The Effect of Mixed Slurry of Fe and Graphite on the Characteristics of Laser Carburized Surface 2017 55 1 16 10.3365/KJMM.2017.55.1.16 Hamed Delfan Abazari, Seyed Mohammad Hossein Seyedkashi, Mohammad Hoseinpour Gollo, Young Hoon Moon Evolution of microstructure and mechanical properties of SUS430/C11000/SUS430 composites during the laser-forming process Metals and Materials International 2017 23 5 865 10.1007/s12540-017-7053-6
16 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Jae Wung Bae, Jongun Moon, Min Ji Jang, Dami Yim, Daeyong Kim, Sunghak Lee, Hyoung Seop Kim Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy Materials Science and Engineering: A 2017 703 324 10.1016/j.msea.2017.07.079
17 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Won-Mi Choi, Seungmun Jung, Yong Hee Jo, Sunghak Lee, Byeong-Joo Lee Design of new face-centered cubic high entropy alloys by thermodynamic calculation Metals and Materials International 2017 23 5 839 10.1007/s12540-017-6701-1
18 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Minh Thuyet-Nguyen, Hong Hai-Nguyen, Won Joo Kim, Ho Yoon Kim, Jin-Chun Kim Synthesis and characterization of magnetic of Ni/ABS nanocomposites by electrical explosion of wire in liquid and solution blending methods Metals and Materials International 2017 23 2 391 10.1007/s12540-017-6533-z
19 Hye Ryoung Park, Young Jun Kwak, Seong Ho Lee, Myoung Youp Song Hydrogen Sorption of Pure Mg and Niobium (V) Fluoride-Added Mg Alloys Prepared by Planetary Ball Milling in Hydrogen 2016 54 12 916 10.3365/KJMM.2016.54.12.916 Yun Mo Yang, Chadrasekhar Loka, Dong Phil Kim, Sin Yong Joo, Sung Whan Moon, Yi Sik Choi, Jung Han Park, Kee-Sun Lee Si-FeSi2/C nanocomposite anode materials produced by two-stage high-energy mechanical milling Metals and Materials International 2017 23 3 610 10.1007/s12540-017-6510-6
20 Min-Hyeok Heo, Namhyun Kang, Seonghun Park, Jun-Ki Kim, Won Sik Hong Kinetics of Intermetallic Compounds Growth Induced by Electromigration of Sn-0.7Cu Solder 2016 54 12 908 10.3365/KJMM.2016.54.12.908 Yujin Park, Jung-Hwan Bang, Chul Oh, Won Hong, Namhyun Kang The Effect of Eutectic Structure on the Creep Properties of Sn-3.0Ag-0.5Cu and Sn-8.0Sb-3.0Ag Solders Metals 2017 7 12 540 10.3390/met7120540
21 In-Jin Shon Rapid Sintering of Nanocrystalline SiC-Graphene Composites 2016 54 12 893 10.3365/KJMM.2016.54.12.893 In-Jin Shon, Jin-Kook Yoon, Kyung-Tae Hong Enhanced properties of nanostructured TiO2-graphene composites by rapid sintering Metals and Materials International 2018 24 1 130 10.1007/s12540-017-7135-5
22 Youngmin Hyun, Heesan Kim Effects of Alloying Elements on the Corrosion Properties of High Strength Steel in a Sour Environment 2016 54 12 885 10.3365/KJMM.2016.54.12.885 Bomi Kim, Soojin Kim, Heesan Kim Effects of Alloying Elements (Cr, Mn) on Corrosion Properties of the High-Strength Steel in 3.5% NaCl Solution Advances in Materials Science and Engineering 2018 2018 1 10.1155/2018/7638274
23 Jun Hwan Kim, Byoung Oon Lee, Jin Sik Cheon, Sung Ho Kim Evaluation of Material Properties on the Inner Surface of Cr Plated Cladding Tube for Preventing Fuel-Cladding Chemical Interaction 2016 54 11 855 10.3365/KJMM.2016.54.11.855 June-Hyung Kim, Jin-Sik Cheon, Byoung-Oon Lee, Jun-Hwan Kim, Hee-Moon Kim, Boung-Ok Yoo, Yang-Hong Jung, Sang-Bok Ahn, Chan-Bock Lee Measurement of microstructure and eutectic penetration rate on irradiated metallic fuel after high-temperature heating test Metals and Materials International 2017 23 3 504 10.1007/s12540-017-6515-1
24 Jeongseok Lee, Seokhwan Kown, Byunggwan Yoon, Byungmoon Chang, Yongil Jung, Jehyun Lee Evolution of the Solidification Microstructures in Directionally Solidified CM247LC Rod 2016 54 11 838 10.3365/KJMM.2016.54.11.838 Baig Gyu Choi, In Soo Kim, Hyun Uk Hong, Jeonghyeon Do, Joong Eun Jung, Chang Yong Jo Effect of Ti content on creep properties of Ni-base single crystal superalloys Metals and Materials International 2017 23 5 877 10.1007/s12540-017-7089-7
25 Yuepeng Song, Miaomiao Chen, Baoyan Xu, Dongsheng Gao, Jing Guo, Lingfeng Xu, Zheng Wang, Hyoung Seop Kim Effects of Friction and Anvil Design on Plastic Deformation during the Compression Stage of High-Pressure Torsion 2016 54 11 831 10.3365/KJMM.2016.54.11.831 Ho Yong Um, Byung Ho Park, Dong-Hyun Ahn, Mohamed Ibrahim Abd El Aal, Jaechan Park, Hyoung Seop Kim Mechanical and biological behavior of ultrafine-grained Ti alloy aneurysm clip processed using high-pressure torsion Journal of the Mechanical Behavior of Biomedical M 2017 68 203 10.1016/j.jmbbm.2017.02.002
26 Yuepeng Song, Miaomiao Chen, Baoyan Xu, Dongsheng Gao, Jing Guo, Lingfeng Xu, Zheng Wang, Hyoung Seop Kim Effects of Friction and Anvil Design on Plastic Deformation during the Compression Stage of High-Pressure Torsion 2016 54 11 831 10.3365/KJMM.2016.54.11.831 Mehdi Kamrani, Valery I. Levitas, Biao Feng FEM simulation of large deformation of copper in the quasi-constrain high-pressure-torsion setup Materials Science and Engineering: A 2017 705 219 10.1016/j.msea.2017.08.078
27 In-Jin Shon Synthesis and Rapid Sintering of Nanocrystalline CoTi-ZrO2 Composite 2016 54 11 826 10.3365/KJMM.2016.54.11.826 In-Jin Shon Mechanochemical synthesis and consolidation of a nanostructured B-Al 2 O 3 hard composite by high-frequency induction-heated sintering Ceramics International 2017 43 1 1612 10.1016/j.ceramint.2016.10.089
28 In-Jin Shon Synthesis and Rapid Sintering of Nanocrystalline CoTi-ZrO2 Composite 2016 54 11 826 10.3365/KJMM.2016.54.11.826 In-Jin Shon, Jin-Kook Yoon, Kyung-Tae Hong Enhanced properties of nanostructured TiO2-graphene composites by rapid sintering Metals and Materials International 2018 24 1 130 10.1007/s12540-017-7135-5
29 In-Jin Shon Synthesis and Rapid Sintering of Nanocrystalline CoTi-ZrO2 Composite 2016 54 11 826 10.3365/KJMM.2016.54.11.826 In-Jin Shon, Jin-Kook Yoon, Kyung-Tae Hong Properties and rapid sintering of a nanostructured tetragonal zirconia composites Metals and Materials International 2017 23 5 940 10.1007/s12540-017-7069-y
30 Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension 2016 54 11 808 10.3365/KJMM.2016.54.11.808 Jung Gi Kim, Seung Mi Baek, Won Tae Cho, Tae Jin Song, Kwang-Geun Chin, Sunghak Lee, Hyoung Seop Kim On the rule-of-mixtures of the hardening parameters in TWIP-cored three-layer steel sheet Metals and Materials International 2017 23 3 459 10.1007/s12540-017-6674-0
31 Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension 2016 54 11 808 10.3365/KJMM.2016.54.11.808 Seok Gyu Lee, Seok Su Sohn, Bohee Kim, Woo Gyeom Kim, Kyung-Keun Um, Sunghak Lee Effects of martensite-austenite constituent on crack initiation and propagation in inter-critical heat-affected zone of high-strength low-alloy (HSLA) steel Materials Science and Engineering: A 2018 715 332 10.1016/j.msea.2018.01.021
32 Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension 2016 54 11 808 10.3365/KJMM.2016.54.11.808 J. I. Yoon, J. Jung, J. H. Ryu, K. Lee, H. S. Kim Development of Methodology with Excellent Reproducibility for Evaluating Stretch-Flangeability Using a Sheared-Edge Tensile Test Experimental Mechanics 2017 57 9 1349 10.1007/s11340-017-0306-y
33 Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension 2016 54 11 808 10.3365/KJMM.2016.54.11.808 Jae Ik Yoon, Jaimyun Jung, Hak Hyeon Lee, Hyoung Seop Kim Small-Scale System for Evaluation of Stretch-Flangeability with Excellent Reliability JOM 2018 70 6 912 10.1007/s11837-018-2766-7
34 Sang-Min Lee, Ji-Woon Lee, Hyun-Jin Choi, Soong-Keun Hyun High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps 2016 54 11 793 10.3365/KJMM.2016.54.11.793 Jaimyun Jung, Jae Ik Yoon, Dong Nyung Lee, Hyoung Seop Kim Numerical analysis on the formation of P-orientation near coarse precipitates in FCC crystals during recrystallization Acta Materialia 2017 131 363 10.1016/j.actamat.2017.04.020
35 Sang-Min Lee, Ji-Woon Lee, Hyun-Jin Choi, Soong-Keun Hyun High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps 2016 54 11 793 10.3365/KJMM.2016.54.11.793 Min Ji Jang, S. Praveen, Hyun Je Sung, Jae Wung Bae, Jongun Moon, Hyoung Seop Kim High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy Journal of Alloys and Compounds 2018 730 242 10.1016/j.jallcom.2017.09.293
36 Sang-Min Lee, Ji-Woon Lee, Hyun-Jin Choi, Soong-Keun Hyun High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps 2016 54 11 793 10.3365/KJMM.2016.54.11.793 Woo Jin Kim, Tae Yang Kwak Constitutive modeling and understanding of the hot compressive deformation of Mg–9.5Zn–2.0Y magnesium alloy with reduced number of strain-dependent constitutive parameters Metals and Materials International 2017 23 4 660 10.1007/s12540-017-6723-8
37 Hyeon-Woo Yang, Jung-Ho Lee, Sang-Chul Jung, Seung-Taek Myung, Woo-Seung Kang, Sun-Jae Kim Fabrication of Si/SiOx Anode Materials by a Solution Reaction-Based Method for Lithium Ion Batteries 2016 54 10 780 10.3365/KJMM.2016.54.10.780 Yun Mo Yang, Chadrasekhar Loka, Dong Phil Kim, Sin Yong Joo, Sung Whan Moon, Yi Sik Choi, Jung Han Park, Kee-Sun Lee Si-FeSi2/C nanocomposite anode materials produced by two-stage high-energy mechanical milling Metals and Materials International 2017 23 3 610 10.1007/s12540-017-6510-6
38 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Hoai Truong, Man Lee, Seong Son Extraction of Palladium(II) from Hydrochloric Acid Solutions by Solvent Extraction with Mixtures Containing Either Cyanex 301 or LIX 63 Metals 2017 7 12 541 10.3390/met7120541
39 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Minh Nhan Le, Man Seung Lee Separation of iridium(IV) and rhodium(III) from hydrochloric acid solution by solvent extraction with Cyanex 921 Geosystem Engineering 2018 21 4 210 10.1080/12269328.2017.1392903
40 Seung Youb Han, Seon Ah Jang, Hee-Chul Eun, Jung-Hoon Choi, Ki Rak Lee, Hwan Seo Park, Do-Hee Ahn, Soo Young Kim, Jea Youl Kim, Sang Yong Shin Effect of Cold Drawing and Heat Treatment on the Microstructure of Invar36 Alloy Wire 2016 54 10 759 10.3365/KJMM.2016.54.10.759 Gyu-Jin Oh, Kye-Man Lee, Moo-Young Huh, Jin Eon Park, Soo Ho Park, Olaf Engler Effect of r-value and texture on plastic deformation and necking behavior in interstitial-free steel sheets Metals and Materials International 2017 23 1 26 10.1007/s12540-017-6375-8
41 Suk-In Jeong, Nam-Il Kim, Sang-Jin Lee Synthesis and Sintering Behavior of Cordierite Prepared from Multi-Component Materials Including Alkaline-Earth Minerals 2016 54 10 752 10.3365/KJMM.2016.54.10.752 Sung-Tae Lee, Dae-Han Lee, Jin-Sik Kim, Sung-Ki Lim Influence of Fe and Ti addition on properties of Na+-β/β″-alumina solid electrolytes Metals and Materials International 2017 23 2 246 10.1007/s12540-017-6120-3
42 Moon-Hi Hong, Deok-Gu Kang, Doo-Jin Paik, Hyeon-Seok Hwang, Sung-ho Park Effect of Added Magneisum on the Coating Properties of Galvanized Steel Sheets 2016 54 10 723 10.3365/KJMM.2016.54.10.723 KiTae Bae, JoungHyun La, InGyu Lee, SangYul Lee, KyungHoon Nam Effects of annealing heat treatment on the corrosion resistance of Zn/Mg/Zn multilayer coatings Metals and Materials International 2017 23 3 481 10.1007/s12540-017-6478-2
43 Dongguo Lin, Sangyul Ha, Youngho Shin, Dong Yong Park, Seong Jin Park, Sung Taek Chung, Ravi Bollina, Seongkyu See Experimental and Simulation Analysis of Hot Isostatic Pressing of Gas Atomized Stainless Steel 316L Powder Compacts 2016 54 10 732 10.3365/KJMM.2016.54.10.732 Qian Xu, Jian-xin Zhou, Hai Nan, Ya-jun Yin, Min Wang, Xu Shen, Xiao-yuan Ji Effects of hot isostatic pressing temperature on casting shrinkage densification and microstructure of Ti6Al4V alloy China Foundry 2017 14 5 429 10.1007/s41230-017-7178-8
44 Dongguo Lin, Sangyul Ha, Youngho Shin, Dong Yong Park, Seong Jin Park, Sung Taek Chung, Ravi Bollina, Seongkyu See Experimental and Simulation Analysis of Hot Isostatic Pressing of Gas Atomized Stainless Steel 316L Powder Compacts 2016 54 10 732 10.3365/KJMM.2016.54.10.732 Quoc Tuan Pham, Young Suk Kim Identification of the plastic deformation characteristics of AL5052-O sheet based on the non-associated flow rule Metals and Materials International 2017 23 2 254 10.1007/s12540-017-6378-5
45 Do-Hoon Kim, You-Hwan Lee, Jeoung Han Kim Effect of Second Aging Treatment on the Microstructure and Mechanical Properties of SUH660 Alloy 2016 54 10 716 10.3365/KJMM.2016.54.10.716 Ki Sub Cho, Hoon Kwon Effect of Si addition on secondary hardening of alloy steels Metals and Materials International 2017 23 4 632 10.1007/s12540-017-7162-2
46 Kun Kul Ryoo, Mi-young Ha, Kang Deuk Lee Transmission Electron Microscopic Analysis of Micro-Twin 2016 54 9 711 10.3365/KJMM.2016.54.9.711 Kwang-Geun Chin, Chung-Yun Kang, Jaeyeong Park, Sunghak Lee Fabrication of Hadfield-Cored Multi-layer Steel Sheet by Roll-Bonding with 1.8-GPa-Strength-Grade Hot-Press-Forming Steel Metals and Materials International 2018 24 3 489 10.1007/s12540-018-0081-z
47 Su-Hyeon Kim, Youngmok Rhyim Serial Sectioning and Reconstruction Techniques for Three-Dimensional Microscopy of Metallic Materials 2016 54 9 698 10.3365/KJMM.2016.54.9.698 Hyung Keun Park, Jaimyun Jung, Hyoung Seop Kim Three-dimensional microstructure modeling of particulate composites using statistical synthetic structure and its thermo-mechanical finite element analysis Computational Materials Science 2017 126 265 10.1016/j.commatsci.2016.09.033
48 Su-Hyeon Kim, Youngmok Rhyim Serial Sectioning and Reconstruction Techniques for Three-Dimensional Microscopy of Metallic Materials 2016 54 9 698 10.3365/KJMM.2016.54.9.698 Jae-Gil Jung, Tae-Young Ahn, Young-Hee Cho, Su-Hyeon Kim, Jung-Moo Lee Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al–Si alloy Acta Materialia 2018 144 31 10.1016/j.actamat.2017.10.039
49 Su-Hyeon Kim, Youngmok Rhyim Serial Sectioning and Reconstruction Techniques for Three-Dimensional Microscopy of Metallic Materials 2016 54 9 698 10.3365/KJMM.2016.54.9.698 Jaimyun Jung, Jae Ik Yoon, Jung Gi Kim, Marat I. Latypov, Jin You Kim, Hyoung Seop Kim Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy npj Computational Materials 2017 3 1 10.1038/s41524-017-0023-1
50 Injoon Son, Ho-Sang Sohn, Kyung Tae Kim Effect of Potassium Persulfate on Current Efficiency for Gold Plating 2016 54 9 652 10.3365/KJMM.2016.54.9.652 SeKwon Oh, YoungJun Kim, KiMin Jung, JongSoo Kim, MinYoung Shon, HyukSang Kwon Effects of temperature and operation parameters on the galvanic corrosion of Cu coupled to Au in organic solderability preservatives process Metals and Materials International 2017 23 2 290 10.1007/s12540-017-6495-1
51 Seung-Yong Lee, Sang-In Lee, Byoungchul Hwang Sensitivity of Microstructural Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis 2016 54 9 637 10.3365/KJMM.2016.54.9.637 Jae Ik Yoon, Jaimyun Jung, Hak Hyeon Lee, Hyoung Seop Kim Small-Scale System for Evaluation of Stretch-Flangeability with Excellent Reliability JOM 2018 70 6 912 10.1007/s11837-018-2766-7
52 Kwon Yong Ji, Dong Bok Lee High Temperature Oxidation Behavior of Mg-5% Ca-1% Zn Alloys 2016 54 9 645 10.3365/KJMM.2016.54.9.645 Dong Bok Lee, Muhammad Ali Abro, Bong Sun You High-temperature oxidation of AZ91-0.3%Ca-0.1%Y alloy in air Metals and Materials International 2017 23 4 720 10.1007/s12540-017-6745-2
53 Bo-Ra Jin, Chang-Yeol Jeong Effect of Alloying Elements on the Low-Cycle Fatigue Properties of Al-Si-Mg-(Cu) Alloys for the Cylinder Head of a Passenger Diesel Engine 2016 54 9 626 10.3365/KJMM.2016.54.9.626 Seungmun Jung, Seok Su Sohn, Won-Mi Choi, Byeong-Joo Lee, Yong-Jun Oh, Seongsik Jang, Sunghak Lee Interpretation of high-temperature tensile properties by thermodynamically calculated equilibrium phase diagrams of heat-resistant austenitic cast steels Metals and Materials International 2017 23 1 43 10.1007/s12540-017-6328-2
54 Bo-Ra Jin, Chang-Yeol Jeong Effect of Alloying Elements on the Low-Cycle Fatigue Properties of Al-Si-Mg-(Cu) Alloys for the Cylinder Head of a Passenger Diesel Engine 2016 54 9 626 10.3365/KJMM.2016.54.9.626 Yong-Sang Kim, Jung-Gu Kim Evaluation of corrosion fatigue and life prediction of lower arm for automotive suspension component Metals and Materials International 2017 23 1 98 10.1007/s12540-017-6396-3
55 Kwangbae Kim, Yunyoung Noh, Minkyoung Choi, Ohsung Song Properties of a Counter Electrode with Nickel Silicides in a Dye Sensitized Solar Cell 2016 54 8 615 10.3365/KJMM.2016.54.8.615 Kwangbae Kim, Yunyoung Noh, Ohsung Song Catalytic Properties of the Cobalt Silicides for a Dye-Sensitized Solar Cell Korean Journal of Materials Research 2016 26 8 401 10.3740/MRSK.2016.26.8.401
56 Hyun-Joo Moon, Daeil Kim Enhanced Optical and Electrical Properties of TiO2 Buffered IGZO/TiO2 Bi-Layered Films 2016 54 8 605 10.3365/KJMM.2016.54.8.605 Arindam Mallick, Durga Basak Revisiting the electrical and optical transmission properties of co-doped ZnO thin films as n-type TCOs Progress in Materials Science 2018 96 86 10.1016/j.pmatsci.2018.03.004
57 Seungpil Kim, Jaeho Jang, Jungsoo Kim, Byung Jun Kim, Keun Yong Sohn, Dae-Geun Nam Microstructure and Mechanical Properties of Inconel 625 Alloy on Low Carbon Steel by Heat Treatment after Overlay Welding 2016 54 8 585 10.3365/KJMM.2016.54.8.585 Shuai Lou, Seul Bi Lee, Dae-Geun Nam, Yoon Suk Choi Microstructures and mechanical properties of bonding layers between low carbon steel and alloy 625 processed by gas tungsten arc welding Metals and Materials International 2017 23 6 1168 10.1007/s12540-017-7167-x
58 Seong-Min Lee Effect of Sawing Velocity Variation on Chipping Damage of Semiconductor Wafers with Different Thicknesses 2016 54 8 598 10.3365/KJMM.2016.54.8.598 Seong-Min Lee Adoption of Hybrid Dicing Technique to Minimize Sawing-Induced Damage during Semiconductor Wafer Separation MATERIALS TRANSACTIONS 2017 58 4 530 10.2320/matertrans.M2016366
59 Seong-Min Lee Effect of Sawing Velocity Variation on Chipping Damage of Semiconductor Wafers with Different Thicknesses 2016 54 8 598 10.3365/KJMM.2016.54.8.598 Seong-Min Lee, Sae-Byeul Kim Effect of grain size evolution in an Au-wire ball on debonding failure with the Al-pad in semiconductor devices Thin Solid Films 2017 641 69 10.1016/j.tsf.2017.01.045
60 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Hoai Truong, Man Lee, Seong Son Extraction of Palladium(II) from Hydrochloric Acid Solutions by Solvent Extraction with Mixtures Containing Either Cyanex 301 or LIX 63 Metals 2017 7 12 541 10.3390/met7120541
61 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Zhuo Chen, Wen-Ting Wang, Fu-Ning Sang, Jian-Hong Xu, Guang-Sheng Luo, Yun-Dong Wang Fast extraction and enrichment of rare earth elements from waste water via microfluidic-based hollow droplet Separation and Purification Technology 2017 174 352 10.1016/j.seppur.2016.10.059
62 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Woojoong Jung, Donghyun Kim, Young-Joo Lee, Yoonsuk Oh, Wonsub Chung Quantification of oxygen concentration on the purification of Nd metals by Solid-state electrotransport Metals and Materials International 2017 23 2 385 10.1007/s12540-017-6188-9
63 Bong-Won Kwak, Byung-Su Kim, Jin-Kook Yoon, Kyung-Tae Hong, In-Jin Shon Fabrication and Mechanical Properties of Nanostructured TiC-TiAl by the Pulsed Current Activated Sintering 2016 54 8 566 10.3365/KJMM.2016.54.8.566 In-Jin Shon, Seok-Jae Lee Rapid consolidation of nanostuctured WC-FeAl 3 by pulsed current activated heating and its mechanical properties International Journal of Refractory Metals and Har 2017 65 69 10.1016/j.ijrmhm.2016.10.009
64 Bong-Won Kwak, Byung-Su Kim, Jin-Kook Yoon, Kyung-Tae Hong, In-Jin Shon Fabrication and Mechanical Properties of Nanostructured TiC-TiAl by the Pulsed Current Activated Sintering 2016 54 8 566 10.3365/KJMM.2016.54.8.566 Minseok Kim, Kwangsoo Choi, Jun Zhu, Fan Zhang, Youngbuem Song, Youngwon Kim, Seonghoon Yi, Joon Sik Park Microstructural control of Ti-Al-Mo-Nb alloy system with respect to variation of B Metals and Materials International 2017 23 4 625 10.1007/s12540-017-6667-z
65 Bong-Won Kwak, Byung-Su Kim, Jin-Kook Yoon, Kyung-Tae Hong, In-Jin Shon Fabrication and Mechanical Properties of Nanostructured TiC-TiAl by the Pulsed Current Activated Sintering 2016 54 8 566 10.3365/KJMM.2016.54.8.566 In-Jin Shon Rapid consolidation of nanostructured WC-FeAl hard composites by high-frequency induction heating and its mechanical properties International Journal of Refractory Metals and Har 2016 61 185 10.1016/j.ijrmhm.2016.09.013
66 Gyu Baek Ahn, Kyeong Hwan Choe, Sang Sub Kim, Gue Serb Cho Microstructure Changes of ZrO2/W/Mo Coating Layers on Graphite after Heat Treatment at 2100 ℃ 2016 54 8 559 10.3365/KJMM.2016.54.8.559 Eun-Joon Chun, Min-Su Kim, Hiroshi Nishikawa, Changkyoo Park, Jeong Suh Laser-assisted selective fusing of thermal sprayed Ni-based self-fluxing alloys by using high-power diode lasers Optics & Laser Technology 2018 100 317 10.1016/j.optlastec.2017.10.021
67 Gyu Baek Ahn, Kyeong Hwan Choe, Sang Sub Kim, Gue Serb Cho Microstructure Changes of ZrO2/W/Mo Coating Layers on Graphite after Heat Treatment at 2100 ℃ 2016 54 8 559 10.3365/KJMM.2016.54.8.559 Jian Liu, Tianbin Zhu, Zhi-Peng Xie, Weiwei Wu New route to improve the flexural strength of silicon nitride ceramics by introducing tungsten carbide nanoparticles International Journal of Applied Ceramic Technolog 2017 14 5 860 10.1111/ijac.12732
68 Gyu Baek Ahn, Kyeong Hwan Choe, Sang Sub Kim, Gue Serb Cho Microstructure Changes of ZrO2/W/Mo Coating Layers on Graphite after Heat Treatment at 2100 ℃ 2016 54 8 559 10.3365/KJMM.2016.54.8.559 Eun-Joon Chun, Changkyoo Park, Hiroshi Nishikawa, Min-Su Kim Microstructural characterization of Ni-based self-fluxing alloy after selective surface-engineering using diode laser Applied Surface Science 2018 442 726 10.1016/j.apsusc.2018.02.226
69 Seokmin Hong, Cholong Lee, Min-Chul Kim, Bong-Sang Lee Effects of Microstructure Variation on Tensile and Charpy Impact Properties in Heavy-Section SA508 Gr.3 Low Alloy Steels for Commercial Reactor Pressure Vessel 2017 55 11 752 10.3365/KJMM.2017.55.11.752 Kunok Chang, Junhyun Kwon, Gyeong-Geun Lee Phase-field Modeling of Precipitate Behavior in RPV Steel Using CALPHAD Database Korean Journal of Metals and Materials 2018 56 6 472 10.3365/KJMM.2018.56.6.472
70 Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars 2016 54 12 862 10.3365/KJMM.2016.54.12.862 Jae-Hyeok Shim, Byoungchul Hwang, Myoung-Gyu Lee, Joonho Lee "Invited Paper" Computer-aided alloy designs of grade 600 MPa reinforced steel bars for seismic safety based on thermodynamic and kinetic calculations: Overview Calphad 2018 62 67 10.1016/j.calphad.2018.05.005
71 Gunchoo Shim Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review 2017 55 5 296 10.3365/KJMM.2017.55.5.296 Luca Pezzato, Dragos Vranescu, Marco Sinico, Claudio Gennari, Alessio Settimi, Pietro Pranovi, Katya Brunelli, Manuele Dabalà Tribocorrosion Properties of PEO Coatings Produced on AZ91 Magnesium Alloy with Silicate- or Phosphate-Based Electrolytes Coatings 2018 8 6 202 10.3390/coatings8060202
72 Tae-Gyu Woo The Effects of Bis(3-Sulfo-Propyl)di-Sulfide (SPS) Additives on the Surface Morphology and Mechanical Properties of Electrolytic Copper Foil 2016 54 9 681 10.3365/KJMM.2016.54.9.681 Tae-Gyu Woo, Il-Song Park, Kyeong-Won Seol Main Effects of Plating Parameters on Mechanical and Surface Properties of Electroplated Copper Korean Journal of Metals and Materials 2018 56 6 459 10.3365/KJMM.2018.56.6.459
73 Ji-Yeon Park, Mi-Song Kim, Chulmin Oh, Sang Hyeon Do, Jong Dock Seo, Dae Keun Kim, Won Sik Hong Solder Joint Fatigue Life of Flexible Impact Sensor Module for Automotive Electronics 2017 55 4 232 10.3365/KJMM.2017.55.4.232 Jeonga Kim, Cheolho Park, Kyung-Mox Cho, Wonsik Hong, Jung-Hwan Bang, Yong-Ho Ko, Namhyun Kang Oxidation and Repeated-Bending Properties of Sn-Based Solder Joints After Highly Accelerated Stress Testing (HAST) Electronic Materials Letters 2018 14 6 678 10.1007/s13391-018-0077-3
74 Yong-Sang Kim, Kyoung-Min Kim, Sangkyu Lee, Jung-Gu Kim Effect of Temperature and Flow Velocity on the Cathodic Protection of Ships and Underwater Electromagnetic Signatures 2017 55 5 348 10.3365/KJMM.2017.55.5.348 Y.-S. Kim, S.K. Lee, J.-G. Kim Influence of anode location and quantity for the reduction of underwater electric fields under cathodic protection Ocean Engineering 2018 163 476 10.1016/j.oceaneng.2018.06.024
75 Jae-hyun Lee, Seong-Jun Park, Joonoh Moon, Jun-Yun Kang, Jun-Young Park, Tae-Ho Lee, Kyung Mox Cho Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels 2017 55 5 363 10.3365/KJMM.2017.55.5.363 Minha Park, Kwangyoon Kim, Jaeho Jang, Hyoung Chan Kim, Hyoung-Seok Moon, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim Influence of Heat Treatment on Mechanical Properties for Cold Worked 304 Austenitic Stainless Steel Korean Journal of Metals and Materials 2018 56 7 490 10.3365/KJMM.2018.56.7.490
76 Tae-Gyu Woo The Effects of Bis(3-Sulfo-Propyl)di-Sulfide (SPS) Additives on the Surface Morphology and Mechanical Properties of Electrolytic Copper Foil 2016 54 9 681 10.3365/KJMM.2016.54.9.681 Tae-Gyu Woo, Man-Hyung Lee, Kyeong-Won Seol Effect of Gelatin and Chloride Ions on the Mechanical Properties and Microstructural Evolution of Copper Foil Korean Journal of Metals and Materials 2018 56 7 518 10.3365/KJMM.2018.56.7.518
77 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Cheon Myeong Park, JeKi Jung, Byung Chul Yu, Yong Ho Park Anisotropy of the Wear and Mechanical Properties of Extruded Aluminum Alloy Rods (AA2024-T4) Metals and Materials International 2019 25 1 71 10.1007/s12540-018-0164-x
78 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Minh Nhan Le, Man Seung Lee, Gamini Senanayake A Short Review of the Separation of Iridium and Rhodium from Hydrochloric Acid Solutions by Solvent Extraction Journal of Solution Chemistry 2018 47 8 1373 10.1007/s10953-018-0770-8
79 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Minh Nhan Le, Thi Hong Nguyen, Man Seung Lee Comparison of separation behavior of Ir(IV) and Rh(III) between tin(II) chloride and ascorbic acid as a reducing agent in the extraction with Cyanex 921 and Cyanex 301 Solvent Extraction and Ion Exchange 2018 36 3 272 10.1080/07366299.2018.1478373
80 Soo-Bae Kim, Young-Hee Cho, Jung-Moo Lee, Jae-Gil Jung, Su Gun Lim The Effect of Ultrasonic Melt Treatment on the Microstructure and Mechanical Properties of Al-7Si-0.35Mg Casting Alloys 2017 55 4 240 10.3365/KJMM.2017.55.4.240 Yong-tae Kim, Kyung-woo Yi Effects of the Ultrasound Treatment on Reaction Rates in the RH Processor Water Model System Metals and Materials International 2019 25 1 238 10.1007/s12540-018-0160-1
81 Young Soo Lim, Minseok Song, Soonil Lee, Won-Seon Seo Effects of Cu-doping on the Power Factor of Bi0.42Sb1.58Te3 Thermoelectric Compounds Prepared by Hot Pressing 2017 55 6 427 10.3365/KJMM.2017.55.6.427 Jang-Yeul Tak, Young Soo Lim Thermoelectric Properties of Cu1.98Se Prepared by Melt-spinning Process Korean Journal of Metals and Materials 2018 56 7 532 10.3365/KJMM.2018.56.7.532
82 In-Jin Shon Effect of Graphene Addition on the Mechanical Properties of TiO2 2017 55 2 110 10.3365/KJMM.2017.55.2.110 Woo Hyun Nam, Young Soo Lim Effect of Interface Control Using Multiwalled Carbon Nanotubes on the Thermoelectric Properties of TiO2 Nanocomposites Korean Journal of Metals and Materials 2018 56 7 538 10.3365/KJMM.2018.56.7.538
83 Minha Park, Kwangyoon Kim, Jaeho Jang, Hyoung Chan Kim, Hyoung-Seok Moon, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim Influence of Heat Treatment on Mechanical Properties for Cold Worked 304 Austenitic Stainless Steel 2018 56 7 490 10.3365/KJMM.2018.56.7.490 Ho Jung Lee, Byeong Seo Kong, Gokul Obulan Subramanian, Jaewon Heo, Changheui Jang, Kyoung-Soo Lee Evaluation of thermal aging of δ-ferrite in austenitic stainless steel weld using nanopillar compression test Scripta Materialia 2018 155 32 10.1016/j.scriptamat.2018.06.016
84 Ji-Won Baek, Man-Seung Lee Separation of Rhenium(VII) and Vanadium(V) from concentrated HCl solution by solvent extraction with Alamine 336 and LIX 63 2017 55 1 31 10.3365/KJMM.2017.55.1.31 Soad. E. Rizk, Naglaa. E. El-Hefny, Jacqueline. A. Daoud Extraction of Vanadium(V) from Mixed Chloride/Thiocyanate Solutions with Two Commercial Solvating Extractants Solvent Extraction and Ion Exchange 2018 36 3 286 10.1080/07366299.2018.1491447
85 Jong-Gu Kim, Jae-Hoon Ju, Dong-Yong Kim, Sung Hyuk Park, Young-Rae Cho Thermal Conductivity of Double-Layer Clad Metals along the Thickness Direction Using Light Flash Analysis and Estimation Models 2017 55 7 523 10.3365/KJMM.2017.55.7.523 Hyung Jin Kim, Sun Ig Hong Effect of Ni Interlayer on the Interface Toughening and Thermal Stability of Cu/Al/Cu Clad Composites Metals and Materials International 2019 25 1 94 10.1007/s12540-018-0170-z
86 Jong Hwan Kim, Dae Sung Kim, Hisayuki Suematsu, Kenta Tanaka, Bong Ki Ryu Structural Analysis of Three-Component Nanoparticles of Sn-58Bi and Cu Wires Prepared by Pulsed Wire Discharge 2017 55 1 72 10.3365/KJMM.2017.55.1.72 Jun Ho Hwang, Dongshin Jeong, Jong-Hyun Lee Liquid-Phase Reaction Sintering Behavior at below 200 °C and Electrical Sheet Resistance of Sn-58Bi/Cu Composite Pastes Korean Journal of Metals and Materials 2018 56 6 440 10.3365/KJMM.2018.56.6.440
87 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Hong-Il So, Joo-eun Lee, Yeon-Chul Cho, Jae-Woo Ahn, Ho-Jin Ryu Leaching of Silver (Ag) from Electronic Scrap by Thiourea Korean Journal of Metals and Materials 2018 56 7 511 10.3365/KJMM.2018.56.7.511
88 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Jiankun Zou, Jihua Chen, Hongge Yan, Weijun Xia, Bin Su, Yi Lei, Qin Wu Effects of Sn addition on dynamic recrystallization of Mg-5Zn-1Mn alloy during high strain rate deformation Materials Science and Engineering: A 2018 735 49 10.1016/j.msea.2018.08.001
89 Jeongseok Lee, Seokhwan Kown, Byunggwan Yoon, Byungmoon Chang, Yongil Jung, Jehyun Lee Evolution of the Solidification Microstructures in Directionally Solidified CM247LC Rod 2016 54 11 838 10.3365/KJMM.2016.54.11.838 Inkang Heo, Donghyun Yoon, Sanghyun Hong, Jinyeol Kim, Jaehoon Kim, Sungho Chang, Siyeon Bae Microstructure Evaluation and Low Cycle Fatigue Damage due to Degradation of Ni-based Superalloy Korean Journal of Metals and Materials 2018 56 8 561 10.3365/KJMM.2018.56.8.561
90 Myoung Youp Song, Eunho Choi, Young Jun Kwak Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling 2018 56 5 392 10.3365/KJMM.2018.56.5.392 Myoung Youp Song, Eunho Choi, Young Jun Kwak Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling Korean Journal of Metals and Materials 2018 56 8 620 10.3365/KJMM.2018.56.8.620
91 Yeonjoo Lee, Jonggyu Jeon, Teasuk Jang, Minwoo Lee, Yongjin Kim, Dongyeol Yang, Mijung Lee, Hyunjoo Choi Soft Magnetic Properties of Fe-based Amorphous/Nanocrystalline Hybrid Materials 2017 55 5 328 10.3365/KJMM.2017.55.5.328 Yeonjoo Lee, Jonggyu Jeon, Seungjin Nam, Teasuk Jang, Hwijun Kim, Minwoo Lee, Yongjin Kim, Dongyeol Yang, Kyeongsik Min, Hyunjoo Choi Soft magnetic properties of Fe-based amorphous/nanocrystalline hybrid materials Powder Technology 2018 339 440 10.1016/j.powtec.2018.08.037
92 Yong-Sang Kim, Kyoung-Min Kim, Sangkyu Lee, Jung-Gu Kim Effect of Temperature and Flow Velocity on the Cathodic Protection of Ships and Underwater Electromagnetic Signatures 2017 55 5 348 10.3365/KJMM.2017.55.5.348 Sangkyu Lee, Hyun-Ju Jung, Chang-Seob Yang Analysis on Variations in Underwater Electromagnetic Signals of a Surface Ship as Varying Placement of ICCP Anodes Korean Journal of Metals and Materials 2018 56 8 628 10.3365/KJMM.2018.56.8.628
93 Jea-Hee Yoon, Young-Hee Cho, Jae-Gil Jung, Jung-Moo Lee, Ik Min Park Influence of Ultrasonic Melt Treatment and Cooling Rates on the Microstructural Development and Elevated Temperature Mechanical Properties of a Hypereutectic Al-18Si-4Cu-3Ni Piston Alloy 2017 55 6 396 10.3365/KJMM.2017.55.6.396 Yong-tae Kim, Kyung-woo Yi Effects of the Ultrasound Treatment on Reaction Rates in the RH Processor Water Model System Metals and Materials International 2019 25 1 238 10.1007/s12540-018-0160-1
94 Seung-Yong Lee, Sang-In Lee, Byoungchul Hwang Sensitivity of Microstructural Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis 2016 54 9 637 10.3365/KJMM.2016.54.9.637 Jong Chul Lee, Won Jong Nam Effects of Initial Microstructures and Annealing Conditions on Mechanical Properties of Cryo-rolled Low Carbon Manganese Steels Korean Journal of Metals and Materials 2018 56 8 551 10.3365/KJMM.2018.56.8.551
95 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Sang Hoon Kim, Jong Un Lee, Byoung Gi Moon, Sung Hyuk Park Extruded Mg-Sn-Al-Zn Alloys with Superior Tensile Properties Key Engineering Materials 2018 775 434 10.4028/www.scientific.net/KEM.775.434
96 Kwon Yong Ji, Dong Bok Lee High Temperature Oxidation Behavior of Mg-5% Ca-1% Zn Alloys 2016 54 9 645 10.3365/KJMM.2016.54.9.645 Seung Mi Baek, Hyung Keun Park, Jae Ik Yoon, Jaimyun Jung, Ji Hyun Moon, Seok Gyu Lee, Jae H. Kim, Taek Soo Kim, Sunghak Lee, Nack J. Kim, Hyoung Seop Kim Effect of secondary phase particles on the tensile behavior of Mg-Zn-Ca alloy Materials Science and Engineering: A 2018 735 288 10.1016/j.msea.2018.08.050
97 Jae-hyun Lee, Seong-Jun Park, Joonoh Moon, Jun-Yun Kang, Jun-Young Park, Tae-Ho Lee, Kyung Mox Cho Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels 2017 55 5 363 10.3365/KJMM.2017.55.5.363 Jae Ik Yoon, Hak Hyeon Lee, Jaimyun Jung, Hyoung Seop Kim Effect of grain size on stretch-flangeability of twinning-induced plasticity steels Materials Science and Engineering: A 2018 735 295 10.1016/j.msea.2018.08.052
98 Dong Gon Woo, Jung Hwan Kim, Jung Sik Kim, Seongchul Hong, Jinho Ahn Study of Novel EUV Absorber:Nickel & Nickel Oxide 2017 55 3 198 10.3365/KJMM.2017.55.3.198 Iacopo Mochi, Patrick Helfenstein, Istvan Mohacsi, Rajendran Rajeev, Dimitrios Kazazis, Shusuke Yoshitake, Yasin Ekinci RESCAN: an actinic lensless microscope for defect inspection of EUV reticles Journal of Micro/Nanolithography, MEMS, and MOEMS 2017 16 4 041003 10.1117/1.JMM.16.4.041003
99 Young Bok Ryu, Man Sig Lee Infrared Spectra and Thermal Properties of Sodium Silicate Solutions 2018 56 1 72 10.3365/KJMM.2018.56.1.72 Yunsu Kim, Do Hyun Kim Pretreatment of low-grade poly(ethylene terephthalate) waste for effective depolymerization to monomers Korean Journal of Chemical Engineering 2018 35 11 2303 10.1007/s11814-018-0130-9
100 Yong-Sang Kim, Kyoung-Min Kim, Sangkyu Lee, Jung-Gu Kim Effect of Temperature and Flow Velocity on the Cathodic Protection of Ships and Underwater Electromagnetic Signatures 2017 55 5 348 10.3365/KJMM.2017.55.5.348 Y.-S. Kim, S. Seok, J.-S. Lee, S.K. Lee, J.-G. Kim Optimizing anode location in impressed current cathodic protection system to minimize underwater electric field using multiple linear regression analysis and artificial neural network methods Engineering Analysis with Boundary Elements 2018 96 84 10.1016/j.enganabound.2018.08.012
101 Hye Ryoung Park, Young Jun Kwak, Seong Ho Lee, Myoung Youp Song Hydrogen Sorption of Pure Mg and Niobium (V) Fluoride-Added Mg Alloys Prepared by Planetary Ball Milling in Hydrogen 2016 54 12 916 10.3365/KJMM.2016.54.12.916 Myoung Youp Song, Eunho Choi, Young Jun Kwak Synthesis of a Mg-based alloy with a hydrogen-storage capacity of over 7 wt% by adding a polymer CMC via transformation-involving milling Materials Research Bulletin 2018 108 23 10.1016/j.materresbull.2018.08.029
102 Myoung Youp Song, Young Jun Kwak Hydrogen Uptake and Release Characteristics of Mg-xTaF5-xVCl3 (x=1.25, 2.5, and 5) 2018 56 8 611 10.3365/KJMM.2018.56.8.611 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the Dehydrogenation Rate of Mg–CMC (Carboxymethylcellulose, Sodium Salt) by Adding Ni via Hydride-Forming Milling Metals and Materials International 2019 25 2 516 10.1007/s12540-018-0188-2
103 Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension 2016 54 11 808 10.3365/KJMM.2016.54.11.808 Jaimyun Jung, Jae Ik Yoon, Hyung Keun Park, Jin You Kim, Hyoung Seop Kim An efficient machine learning approach to establish structure-property linkages Computational Materials Science 2019 156 17 10.1016/j.commatsci.2018.09.034
104 Myoung Youp Song, Eunho Choi, Young Jun Kwak Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling 2018 56 5 392 10.3365/KJMM.2018.56.5.392 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the Dehydrogenation Rate of Mg–CMC (Carboxymethylcellulose, Sodium Salt) by Adding Ni via Hydride-Forming Milling Metals and Materials International 2019 25 2 516 10.1007/s12540-018-0188-2
105 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the Dehydrogenation Rate of Mg–CMC (Carboxymethylcellulose, Sodium Salt) by Adding Ni via Hydride-Forming Milling Metals and Materials International 2019 25 2 516 10.1007/s12540-018-0188-2
106 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Jinpeng Qiao, Long Huang, Chenlong Duan, Haishen Jiang, Yuemin Zhao, Huannan Shao, Miao Pan Research on separation mechanism of waste palladium catalyst in a structure-optimized compound dry separator based on DEM-CFD Particulate Science and Technology 2020 38 2 131 10.1080/02726351.2018.1500500
107 Seong-Hyeon Hong, Young Jun Kwak, Myoung Youp Song Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere 2018 56 1 59 10.3365/KJMM.2018.56.1.59 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the Dehydrogenation Rate of Mg–CMC (Carboxymethylcellulose, Sodium Salt) by Adding Ni via Hydride-Forming Milling Metals and Materials International 2019 25 2 516 10.1007/s12540-018-0188-2
108 Xuan-Khoa Huynh, Sun-Woo Bae, Ji Soon Kim in situ Fabrication of Fe-TiB2 Nanocomposite Powder by Planetary Ball Milling and Subsequent Heat-treatment of FeB and TiH2 Powder Mixture 2017 55 1 10 10.3365/KJMM.2017.55.1.10 Hak-Rae Cho, Ji-Soon Kim, Koo-Hyun Chung Microstructure, mechanical, and tribological properties of pressureless sintered and spark plasma sintered Fe TiB2 nanocomposites Tribology International 2019 131 83 10.1016/j.triboint.2018.10.016
109 Byung Hak Choe, Hyeon Su Jang, Bum Kyu Lee, Ka Ram Lim, Young Sang Na, Yong Taek Hyun, Seung Eon Kim, Young Uk Kim, Chan Sung Park Metastable Phase Transformation of Beta Titanium Alloys by Slip Mechanism 2017 55 7 453 10.3365/KJMM.2017.55.7.453 Muhammad Iman Utama, Nokeun Park, Eung Ryul Baek Microstructure and Mechanical Features of Electron Beam Welded Dissimilar Titanium Alloys: Ti–10V–2Fe–3Al and Ti–6Al–4V Metals and Materials International 2019 25 2 439 10.1007/s12540-018-0197-1
110 Ye-Eun Cha, Il-Ho Kim Thermoelectric Properties of Partially Double-filled (Ce1-zNdz)yFe4-xCoxSb12 Skutterudites 2018 56 6 465 10.3365/KJMM.2018.56.6.465 Ye-Eun Cha, Il-Ho Kim Charge Transport and Thermoelectric Properties of (La1−zPrz)0.8Fe4−xCoxSb12 Skutterudites Korean Journal of Metals and Materials 2018 56 10 772 10.3365/KJMM.2018.56.10.772
111 Byung Hak Choe, Hyeon Su Jang, Bum Gyu Lee, Eui Soo Kim, Woo Sik Kim, Un Bong Baek, Sung Hoon Nam Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test 2018 56 1 1 10.3365/KJMM.2018.56.1.1 Su Mi Jo, Bong Sun You, Young Min Kim Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets Korean Journal of Metals and Materials 2018 56 10 734 10.3365/KJMM.2018.56.10.734
112 Seong-Min Lee Effect of Sawing Velocity Variation on Chipping Damage of Semiconductor Wafers with Different Thicknesses 2016 54 8 598 10.3365/KJMM.2016.54.8.598 Seong-Min Lee Pattern Design to Prevent Sawing-Induced Passivation Damage on Scribe Region During Semiconductor Wafer Separation MATERIALS TRANSACTIONS 2018 59 12 1887 10.2320/matertrans.M2018221
113 Hoai Thanh Truong, Yong Hwan Kim, Man Seung Lee Solvent Extraction of Tungsten(VI) from Moderate Hydrochloric Acid Solutions with LIX 63 2017 55 6 405 10.3365/KJMM.2017.55.6.405 Seong-June Youn, Yeun-Ah Joo, Tae-Shik Yoon, Kee-Ahn Lee Effect of Heat Treatment on the Microstructure and Mechanical Properties of W-7Ni-3Fe Tungsten Heavy Alloy Manufactured by Metal Injection Molding Process Korean Journal of Metals and Materials 2018 56 10 727 10.3365/KJMM.2018.56.10.727
114 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Rajesh Kumar Jyothi, Hae-Rim Kim, Joon Soo Kim, Kyeong-Woo Chung, Jin-Young Lee Diluents Role in Extraction and Possible Separation of Light Rare Earth Elements from Chloride Solutions by using Cyanex® 272 used as an Extractant Korean Journal of Metals and Materials 2018 56 10 763 10.3365/KJMM.2018.56.10.763
115 Yeun-Ah Joo, Young-Kyun Kim, Tae-Sik Yoon, Kee-Ahn Lee Microstructure and Mechanical Properties of 17-4PH Steel and Fe-Cr-B Alloy Mixed Material Manufactured Using Powder Injection Molding 2018 56 5 342 10.3365/KJMM.2018.56.5.342 Seong-June Youn, Yeun-Ah Joo, Tae-Shik Yoon, Kee-Ahn Lee Effect of Heat Treatment on the Microstructure and Mechanical Properties of W-7Ni-3Fe Tungsten Heavy Alloy Manufactured by Metal Injection Molding Process Korean Journal of Metals and Materials 2018 56 10 727 10.3365/KJMM.2018.56.10.727
116 Han Ul Choi, Ju Sung Jin, Hyung-Tae Lim Effect of Preparation Methods on the Electrochemical Performance of All-solid-state Li-S Batteries 2017 55 7 503 10.3365/KJMM.2017.55.7.503 Young-Jun Song Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process Korean Journal of Metals and Materials 2018 56 10 755 10.3365/KJMM.2018.56.10.755
117 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Su Mi Jo, Bong Sun You, Young Min Kim Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets Korean Journal of Metals and Materials 2018 56 10 734 10.3365/KJMM.2018.56.10.734
118 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Sang Won Lee, Sang-Hoon Kim, Sung Hyuk Park Tensile Properties at Room and Elevated Temperatures and High-Cycle Fatigue Properties of Extruded AZ80 and TAZ711 Alloys Korean Journal of Metals and Materials 2018 56 10 699 10.3365/KJMM.2018.56.10.699
119 Ji-Sun Lee, MiJai Lee, Tae-Young Lim, Youngjin Lee, Dae-Woo Jeon, Soong-Keun Hyun, Jin-Ho Kim Physical Properties of AR-Glass Fibers in Continuous Fiber Spinning Conditions 2017 55 4 290 10.3365/KJMM.2017.55.4.290 Ashutosh Sharma, Byungmin Ahn Effect of MgO Addition on the Monoclinic to Tetragonal Transition of ZrO2 Fabricated by High Energy Ball Milling Korean Journal of Metals and Materials 2018 56 10 718 10.3365/KJMM.2018.56.10.718
120 Soo Woo Nam High Temperature Properties and Recent Research Trend of Mg-RE Alloys 2017 55 4 213 10.3365/KJMM.2017.55.4.213 Su Mi Jo, Bong Sun You, Young Min Kim Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets Korean Journal of Metals and Materials 2018 56 10 734 10.3365/KJMM.2018.56.10.734
121 Soo Woo Nam High Temperature Properties and Recent Research Trend of Mg-RE Alloys 2017 55 4 213 10.3365/KJMM.2017.55.4.213 Sang Won Lee, Sang-Hoon Kim, Sung Hyuk Park Tensile Properties at Room and Elevated Temperatures and High-Cycle Fatigue Properties of Extruded AZ80 and TAZ711 Alloys Korean Journal of Metals and Materials 2018 56 10 699 10.3365/KJMM.2018.56.10.699
122 Jun Yeong Ko, Jae Sook Song, Sun Ig Hong Effect of Carbon Addition and Recrystallization on the Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys 2018 56 1 26 10.3365/KJMM.2018.56.1.26 Jeoung Han Kim, Young Sang Na Tensile Properties and Serrated Flow Behavior of As-Cast CoCrFeMnNi High-Entropy Alloy at Room and Elevated Temperatures Metals and Materials International 2019 25 2 296 10.1007/s12540-018-0200-x
123 Ji-Hye Choe, A-Yeon Jang, Jeong-Heui Kim, Choong-Heui Chung, Ki-Ha Hong Effects of Dispersion Solvent on the Spray Coating Deposition of Silver Nanowires 2017 55 7 509 10.3365/KJMM.2017.55.7.509 Csaba Forró, László Demkó, Serge Weydert, János Vörös, Klas Tybrandt Predictive Model for the Electrical Transport within Nanowire Networks ACS Nano 2018 12 11 11080 10.1021/acsnano.8b05406
124 Jun Yeong Ko, Jae Sook Song, Sun Ig Hong Effect of Carbon Addition and Recrystallization on the Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys 2018 56 1 26 10.3365/KJMM.2018.56.1.26 Nokeun Park Precise Flow Stress Analysis for the Occurrence of Dynamic Ferritic Transformation and Dynamic Recrystallization of Austenite in Low Carbon Steel Korean Journal of Metals and Materials 2018 56 11 779 10.3365/KJMM.2018.56.11.779
125 Gyu Baek Ahn, Kyeong Hwan Choe, Sang Sub Kim, Gue Serb Cho Microstructure Changes of ZrO2/W/Mo Coating Layers on Graphite after Heat Treatment at 2100 ℃ 2016 54 8 559 10.3365/KJMM.2016.54.8.559 Ashutosh Sharma, Byungmin Ahn Effect of MgO Addition on the Monoclinic to Tetragonal Transition of ZrO2 Fabricated by High Energy Ball Milling Korean Journal of Metals and Materials 2018 56 10 718 10.3365/KJMM.2018.56.10.718
126 Ye-Eun Cha, Il-Ho Kim Thermoelectric Properties of Partially Double-filled (Ce1-zNdz)yFe4-xCoxSb12 Skutterudites 2018 56 6 465 10.3365/KJMM.2018.56.6.465 Deok-Yeong Choi, Ye-Eun Cha, Il-Ho Kim Thermoelectric Properties of P-type (Ce1-zYbz)0.8Fe4-xCoxSb12 Skutterudites Korean Journal of Metals and Materials 2018 56 11 822 10.3365/KJMM.2018.56.11.822
127 Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension 2016 54 11 808 10.3365/KJMM.2016.54.11.808 Jaimyun Jung, Jae Ik Yoon, Hyung Keun Park, Jin You Kim, Hyoung Seop Kim Bayesian approach in predicting mechanical properties of materials: Application to dual phase steels Materials Science and Engineering: A 2019 743 382 10.1016/j.msea.2018.11.106
128 Gunchoo Shim Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review 2017 55 5 296 10.3365/KJMM.2017.55.5.296 Myungwon Hwang, Wonsub Chung Effects of a Carbon Nanotube Additive on the Corrosion-Resistance and Heat-Dissipation Properties of Plasma Electrolytic Oxidation on AZ31 Magnesium Alloy Materials 2018 11 12 2438 10.3390/ma11122438
129 Jae-hyun Lee, Seong-Jun Park, Joonoh Moon, Jun-Yun Kang, Jun-Young Park, Tae-Ho Lee, Kyung Mox Cho Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels 2017 55 5 363 10.3365/KJMM.2017.55.5.363 Sung-Won Park, Jun Young Park, Kyong Mox Cho, Jae Hoon Jang, Seong-Jun Park, Joonoh Moon, Tae-Ho Lee, Jong-Ho Shin Effect of Mn and C on Age Hardening of Fe–Mn–Al–C Lightweight Steels Metals and Materials International 2019 25 3 683 10.1007/s12540-018-00230-x
130 Suk-In Jeong, Nam-Il Kim, Sang-Jin Lee Synthesis and Sintering Behavior of Cordierite Prepared from Multi-Component Materials Including Alkaline-Earth Minerals 2016 54 10 752 10.3365/KJMM.2016.54.10.752 M. Senthil Kumar, M. Vanmathi, G. Senguttuvan, R. V. Mangalaraja, G. Sakthivel Fly Ash Constituent-Silica and Alumina Role in the Synthesis and Characterization of Cordierite Based Ceramics Silicon 2019 11 6 2599 10.1007/s12633-018-0049-0
131 Myoung Youp Song, Young Jun Kwak Hydrogen Uptake and Release Characteristics of Mg-xTaF5-xVCl3 (x=1.25, 2.5, and 5) 2018 56 8 611 10.3365/KJMM.2018.56.8.611 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling Korean Journal of Metals and Materials 2018 56 12 878 10.3365/KJMM.2018.56.12.878
132 Hye Ryoung Park, Young Jun Kwak, Seong Ho Lee, Myoung Youp Song Hydrogen Sorption of Pure Mg and Niobium (V) Fluoride-Added Mg Alloys Prepared by Planetary Ball Milling in Hydrogen 2016 54 12 916 10.3365/KJMM.2016.54.12.916 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling Korean Journal of Metals and Materials 2018 56 12 878 10.3365/KJMM.2018.56.12.878
133 In-Jin Shon Rapid Sintering of Nanocrystalline SiC-Graphene Composites 2016 54 12 893 10.3365/KJMM.2016.54.12.893 Jae-Yong Jung, Yang-Do Kim, Young-Kuk Kim Effect of CaF2 Addition on the Crystallinity of Hexagonal Boron Nitride Nanoparticles Korean Journal of Metals and Materials 2018 56 12 915 10.3365/KJMM.2018.56.12.915
134 Seung Youb Han, Seon Ah Jang, Hee-Chul Eun, Jung-Hoon Choi, Ki Rak Lee, Hwan Seo Park, Do-Hee Ahn, Soo Young Kim, Jea Youl Kim, Sang Yong Shin Effect of Cold Drawing and Heat Treatment on the Microstructure of Invar36 Alloy Wire 2016 54 10 759 10.3365/KJMM.2016.54.10.759 Hyun Park, Sang-Hyeok Kim, Se-Jong Kim, Hyo-Jong Lee Effect of Shear Deformation During Drawing on Inhomogeneous Microstructures and Textures in High Purity Copper Wires After Annealing Korean Journal of Metals and Materials 2018 56 12 861 10.3365/KJMM.2018.56.12.861
135 Sang-Min Lee, Ji-Woon Lee, Hyun-Jin Choi, Soong-Keun Hyun High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps 2016 54 11 793 10.3365/KJMM.2016.54.11.793 Nokeun Park Precise Flow Stress Analysis for the Occurrence of Dynamic Ferritic Transformation and Dynamic Recrystallization of Austenite in Low Carbon Steel Korean Journal of Metals and Materials 2018 56 11 779 10.3365/KJMM.2018.56.11.779
136 Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars 2016 54 12 862 10.3365/KJMM.2016.54.12.862 Kaushik Bandyopadhyay, Joonho Lee, Jae-Hyeok Shim, Byoungchul Hwang, Myoung-Gyu Lee Modeling and experiment on microstructure evolutions and mechanical properties in grade 600 MPa reinforcing steel rebar subjected to TempCore process Materials Science and Engineering: A 2019 745 39 10.1016/j.msea.2018.12.079
137 Seon Yeong Bae, Mi Young Park, Jong Gyu Lee, Hyung-Tae Lim Effects of the Air Flow Rate and Electrolyte Thickness on the Durability of Yttria-doped Barium Cerate (BCY)-based Solid Oxide Fuel Cells 2017 55 5 335 10.3365/KJMM.2017.55.5.335 Ho Seong Lee, Hyun Mi Lee, Hyung-Tae Lim Sulfur Poisoning of Ni Anode as a Function of Operating Conditions in Solid Oxide Fuel Cells Korean Journal of Metals and Materials 2018 56 12 893 10.3365/KJMM.2018.56.12.893
138 Jang Sik Park, Jin Ok Joo Evolution of High Tin Bronze Technology in Korea as Observed in Bronze Objects of the Unified Silla Period, Excavated from the National Gyongju Museum Site 2016 54 12 937 10.3365/KJMM.2016.54.12.937 Yong-You Kim, Hee-Soo Kim Prediction of Grain Structure of Thin Bronze Slab Produced by Horizontal Continuous Casting Metals and Materials International 2019 25 2 465 10.1007/s12540-018-00231-w
139 Min-Hyeok Heo, Namhyun Kang, Seonghun Park, Jun-Ki Kim, Won Sik Hong Kinetics of Intermetallic Compounds Growth Induced by Electromigration of Sn-0.7Cu Solder 2016 54 12 908 10.3365/KJMM.2016.54.12.908 Gyu-Tae Park, Byeong-Rok Lee, Kirak Son, Young-Bae Park Ni Barrier Symmetry Effect on Electromigration Failure Mechanism of Cu/Sn–Ag Microbump Electronic Materials Letters 2019 15 2 149 10.1007/s13391-018-00108-5
140 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling Korean Journal of Metals and Materials 2018 56 12 878 10.3365/KJMM.2018.56.12.878
141 Taeyeul Park, Kwangbae Kim, Ohsung Song Properties of the Catalytic Nickel Silicides for a Dye-Sensitized Solar Cell 2017 55 6 440 10.3365/KJMM.2017.55.6.440 Tae Wan Park, Hyunsung Jung, Young-Rae Cho, Jung Woo Lee, Woon Ik Park Pattern Formation of Highly Ordered Sub-20 nm Pt Cross-Bar on Ni Thin Film Korean Journal of Metals and Materials 2018 56 12 910 10.3365/KJMM.2018.56.12.910
142 Hayoung Choi, Hyukhyun Ryu, Won-Jae Lee Study of the Morphological, Structural and Photoelectrochemical Properties of TiO2 Nanorods grown by Hydrothermal Method 2017 55 1 46 10.3365/KJMM.2017.55.1.46 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution Korean Journal of Metals and Materials 2018 56 12 900 10.3365/KJMM.2018.56.12.900
143 Seong-Hyeon Hong, Young Jun Kwak, Myoung Youp Song Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere 2018 56 1 59 10.3365/KJMM.2018.56.1.59 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling Korean Journal of Metals and Materials 2018 56 12 878 10.3365/KJMM.2018.56.12.878
144 Hyun Jun Kwon, Ka Ram Lim, Yong Tae Lee, Dong Geun Lee, Jun Hee Lee, Seung Eon Kim Effect of Aging Time and Temperature on Microstructure and Mechanical Properties of Ti-39Nb-6Zr Alloy 2016 54 12 925 10.3365/KJMM.2016.54.12.925 Sanghoo Park, Sumin Kim, Daeun Lee, Soojin Ahn, Sangshik Kim Effect of Microstructural Factors on Fatigue and Fatigue Crack Propagation Behaviors of Mill-Annealed Ti-6Al-4V Alloy Korean Journal of Metals and Materials 2018 56 12 845 10.3365/KJMM.2018.56.12.845
145 Myoung Youp Song, Eunho Choi, Young Jun Kwak Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling 2018 56 5 392 10.3365/KJMM.2018.56.5.392 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling Korean Journal of Metals and Materials 2018 56 12 878 10.3365/KJMM.2018.56.12.878
146 Seong-Hyeon Hong, Young Jun Kwak, Myoung Youp Song Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere 2018 56 1 59 10.3365/KJMM.2018.56.1.59 Myoung Youp Song, Eunho Choi, Young Jun Kwak Preparation of a Mg-Based alloy with a high hydrogen-storage capacity by adding a polymer CMC via milling in a hydrogen atmosphere International Journal of Hydrogen Energy 2019 44 7 3779 10.1016/j.ijhydene.2018.12.081
147 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Myoung Youp Song, Eunho Choi, Young Jun Kwak Preparation of a Mg-Based alloy with a high hydrogen-storage capacity by adding a polymer CMC via milling in a hydrogen atmosphere International Journal of Hydrogen Energy 2019 44 7 3779 10.1016/j.ijhydene.2018.12.081
148 Myoung Youp Song, Young Jun Kwak Hydrogen Uptake and Release Characteristics of Mg-xTaF5-xVCl3 (x=1.25, 2.5, and 5) 2018 56 8 611 10.3365/KJMM.2018.56.8.611 Myoung Youp Song, Eunho Choi, Young Jun Kwak Preparation of a Mg-Based alloy with a high hydrogen-storage capacity by adding a polymer CMC via milling in a hydrogen atmosphere International Journal of Hydrogen Energy 2019 44 7 3779 10.1016/j.ijhydene.2018.12.081
149 Jong-Sig Kim, Myeong-Soo Lee, Jong-Min Jung, Han-Geul Choi, Sang-Hoon Jeong, Chang-Yong Kang Effects of Si on the Characteristics of FCA Multi-Layer Weld Metal with 460 MPa Yield Strength Grade Steels for Ships and Marine Structures 2018 56 7 499 10.3365/KJMM.2018.56.7.499 Tae-Woo Kang, Myung-Hyun Kim A Study for Brittle Crack Prevention and Fatigue Life Improvement using a Welded Stiffener Journal of Welding and Joining 2018 36 6 28 10.5781/JWJ.2018.36.6.5
150 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling 2018 56 12 878 10.3365/KJMM.2018.56.12.878 Myoung Youp Song, Eunho Choi, Young Jun Kwak Preparation of a Mg-Based alloy with a high hydrogen-storage capacity by adding a polymer CMC via milling in a hydrogen atmosphere International Journal of Hydrogen Energy 2019 44 7 3779 10.1016/j.ijhydene.2018.12.081
151 Jeong Hun Lee, Yoo Sei Park, Myeong Je Jang, Sung Min Park, Kyu Hwan Lee, Woo Sung Choi, Sung Mook Choi, Yang Do Kim MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution 2018 56 12 885 10.3365/KJMM.2018.56.12.885 Changsoo Lee, Kihoon Bang, Doosun Hong, Hyuck Mo Lee Recent Progress in First Principle Calculation and High-Throughput Screening of Electrocatalysts: A Review Korean Journal of Metals and Materials 2019 57 1 1 10.3365/KJMM.2019.57.1.1
152 Jun Ho Hwang, Dongshin Jeong, Jong-Hyun Lee Liquid-Phase Reaction Sintering Behavior at below 200 °C and Electrical Sheet Resistance of Sn-58Bi/Cu Composite Pastes 2018 56 6 440 10.3365/KJMM.2018.56.6.440 Jun Yeab Lee, Sang Pill Lee, Jin Kyung Lee, Moon Hee Lee, Seung Kuk Hwang Mechanical Properties of Liquid Phase Sintered SiC Materials by the Addition of Unimodal and Bimodal Particles Korean Journal of Metals and Materials 2019 57 1 60 10.3365/KJMM.2019.57.1.60
153 Kook-Soo Bang, Young-Ho Ahn, Hong-Chul Jeong Impact Toughness and Softening of the Heat Affected Zone of High Heat Input Welded 390 MPa Yield Strength Grade TMCP Steel 2018 56 11 796 10.3365/KJMM.2018.56.11.796 Su-Kil Park, Young-Ho Cho, Chun-Ho Jee, Junghoon Lee, Seong-Moon Seo, Namhyun Kang Influence of Boron and Manganese on Hot Crack Resistance and Low Temperature Toughness of Flux Cored Arc Weld Metal for High Strength Carbon Steels Korean Journal of Metals and Materials 2019 57 1 28 10.3365/KJMM.2019.57.1.28
154 Hyeon-Woo Yang, Jung-Ho Lee, Sang-Chul Jung, Seung-Taek Myung, Woo-Seung Kang, Sun-Jae Kim Fabrication of Si/SiOx Anode Materials by a Solution Reaction-Based Method for Lithium Ion Batteries 2016 54 10 780 10.3365/KJMM.2016.54.10.780 Jun-Hyoung Park, Yong-Seok Choi, Hyung Cheoul Shim, Jae-Pyoung Ahn, Jae-Chul Lee Direct Measurement of Electric Resistivity of Solid Electrolyte Interface Using 4-Point-Probe Technique Korean Journal of Metals and Materials 2019 57 1 67 10.3365/KJMM.2019.57.1.67
155 Hye Ryoung Park, Young Jun Kwak, Seong Ho Lee, Myoung Youp Song Hydrogen Sorption of Pure Mg and Niobium (V) Fluoride-Added Mg Alloys Prepared by Planetary Ball Milling in Hydrogen 2016 54 12 916 10.3365/KJMM.2016.54.12.916 Myoung Youp Song, Eunho Choi, Young Jun Kwak Preparation of a Mg-Based alloy with a high hydrogen-storage capacity by adding a polymer CMC via milling in a hydrogen atmosphere International Journal of Hydrogen Energy 2019 44 7 3779 10.1016/j.ijhydene.2018.12.081
156 Young Soo Lim, Soonil Lee Effects of Sb on the Charge Transport and Power Factor of Bi2-xSbxTe3 Thermoelectric Compounds Prepared by Hot Pressing 2017 55 9 651 10.3365/KJMM.2017.55.9.651 Ui Gyeong Hwang, Kyomin Kim, Woochul Kim, Weon Ho Shin, Won-Seon Seo, Young Soo Lim Thermoelectric Transport Properties of Interface-Controlled p-type Bismuth Antimony Telluride Composites by Reduced Graphene Oxide Electronic Materials Letters 2019 15 5 605 10.1007/s13391-019-00118-x
157 Jae-hyun Lee, Seong-Jun Park, Joonoh Moon, Jun-Yun Kang, Jun-Young Park, Tae-Ho Lee, Kyung Mox Cho Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels 2017 55 5 363 10.3365/KJMM.2017.55.5.363 Jong Won Baek, Joo Won Oh, Jae-Sook Chung, Yong-Seok Cho, Seong Jin Park Analysis of a Slab and Slab Heater Cover in a Compact Endless Cast and Rolling Mill Process Using Finite Element Methods Korean Journal of Metals and Materials 2019 57 1 43 10.3365/KJMM.2019.57.1.43
158 Min Gyeom Kim, Tae Whan Hong Evaluations of Hydrogen Permeation on Ni-SCYb Nano-Composites Membrane by Sol-Gel Methods 2018 56 5 406 10.3365/KJMM.2018.56.5.406 Yong Ju Jang, Hyeon-Jin Shin, Seong Ju Wi, Ha Neul Kim, Gi Sung Lee, Jinho Ahn Investigation of the Mechanical/Thermal Properties of Nano-Scale Silicon Nitride Membranes Korean Journal of Metals and Materials 2019 57 2 124 10.3365/KJMM.2019.57.2.124
159 Young-Wook Cho, Jong-Ho Won, Jeong-Ho Woo, Sang-Ho Yu, Young-Rae Cho Effect of Oxi-Nitrocarburizing on the Microstructure, Nanohardness and Corrosion Properties for Low Carbon Steel 2018 56 4 289 10.3365/KJMM.2018.56.4.289 Young-Wook Cho, Young-Joon Kang, Ju-Hwan Baek, Jeong-Ho Woo, Young-Rae Cho Investigation of Microstructure, Nanohardness and Corrosion Resistance for Oxi-Nitrocarburized Low Carbon Steel Metals 2019 9 2 190 10.3390/met9020190
160 Won-Jong Ji, Seong-Hoon Lee, Young-Hoon Moon The Effect of Mixed Slurry of Fe and Graphite on the Characteristics of Laser Carburized Surface 2017 55 1 16 10.3365/KJMM.2017.55.1.16 Dong Myeong Seo, Tae Woo Hwang, Young Hoon Moon Carbonitriding of Ti-6Al-4V alloy via laser irradiation of pure graphite powder in nitrogen environment Surface and Coatings Technology 2019 363 244 10.1016/j.surfcoat.2019.02.038
161 Jae-hyun Lee, Seong-Jun Park, Joonoh Moon, Jun-Yun Kang, Jun-Young Park, Tae-Ho Lee, Kyung Mox Cho Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels 2017 55 5 363 10.3365/KJMM.2017.55.5.363 Jong Won Baek, Seong Jin Park Pressure Transmission in the Compaction Process of Nickel Powder Using the Finite Element Methods Korean Journal of Metals and Materials 2019 57 2 115 10.3365/KJMM.2019.57.2.115
162 Eun Hye Hwang, Hwan Goo Seong, Sung Jin Kim Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications 2018 56 8 570 10.3365/KJMM.2018.56.8.570 Yeonjung Hwang, Chang Wook Lee, Ga-Young Shin, Ji Hong Yoo, Minsu Choi Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel Korean Journal of Metals and Materials 2019 57 3 193 10.3365/KJMM.2019.57.3.193
163 Chieon Park, Bongyoung Yoo, Joonkyun Lee Characteristics of Electroless Sn Plating Electrolyte using a Choline Chloride-Based Ionic Liquid 2018 56 9 645 10.3365/KJMM.2018.56.9.645 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution Korean Journal of Metals and Materials 2019 57 3 162 10.3365/KJMM.2019.57.3.162
164 Myoung Youp Song, Eunho Choi, Young Jun Kwak Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling 2018 56 5 392 10.3365/KJMM.2018.56.5.392 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 Korean Journal of Metals and Materials 2019 57 3 176 10.3365/KJMM.2019.57.3.176
165 Hong-Il So, Joo-eun Lee, Yeon-Chul Cho, Jae-Woo Ahn, Ho-Jin Ryu Leaching of Silver (Ag) from Electronic Scrap by Thiourea 2018 56 7 511 10.3365/KJMM.2018.56.7.511 Thi Thuy Nhi Nguyen, Man Seung Lee Improvement of Alumina Dissolution from the Mechanically Activated Dross Using Ultrasound-Assisted Leaching Korean Journal of Metals and Materials 2019 57 3 154 10.3365/KJMM.2019.57.3.154
166 Seong-Hyeon Hong, Young Jun Kwak, Myoung Youp Song Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere 2018 56 1 59 10.3365/KJMM.2018.56.1.59 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 Korean Journal of Metals and Materials 2019 57 3 176 10.3365/KJMM.2019.57.3.176
167 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 Korean Journal of Metals and Materials 2019 57 3 176 10.3365/KJMM.2019.57.3.176
168 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling 2018 56 12 878 10.3365/KJMM.2018.56.12.878 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 Korean Journal of Metals and Materials 2019 57 3 176 10.3365/KJMM.2019.57.3.176
169 Myoung Youp Song, Eunho Choi, Young Jun Kwak Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling 2018 56 8 620 10.3365/KJMM.2018.56.8.620 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 Korean Journal of Metals and Materials 2019 57 3 176 10.3365/KJMM.2019.57.3.176
170 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution Korean Journal of Metals and Materials 2019 57 3 162 10.3365/KJMM.2019.57.3.162
171 Myoung Youp Song, Young Jun Kwak Hydrogen Uptake and Release Characteristics of Mg-xTaF5-xVCl3 (x=1.25, 2.5, and 5) 2018 56 8 611 10.3365/KJMM.2018.56.8.611 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 Korean Journal of Metals and Materials 2019 57 3 176 10.3365/KJMM.2019.57.3.176
172 Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel 2018 56 5 375 10.3365/KJMM.2018.56.5.375 Nana Kwabena Adomako, Jeng O. Kim, Jeoung Han Kim Microstructural evolution and mechanical properties of laser beam welded joints between pure V and 17-4PH stainless steel Materials Science and Engineering: A 2019 753 208 10.1016/j.msea.2019.03.036
173 Kwangsu Choi, Jeong Min Kim, Joon Sik Park, Young-won Kim Microstructural Evolution in Cast and HIP’ed Ingot Material of Beta Gamma TiAl Alloy by Two Step Cooling 2018 56 5 335 10.3365/KJMM.2018.56.5.335 Kwangsu Choi, Youngbuem Song, Seonghoon Yi, Joon Sik Park Oxidation Behaviors of Alloys Containing β/B2 Phases of Ti-45Al-Mo-Nb Alloys and Evaluation of the Oxidation Behaviors of Si Pack Cementation Coated Alloys Korean Journal of Metals and Materials 2019 57 3 131 10.3365/KJMM.2019.57.3.131
174 Su Jin Kim, Jeong Il Lee, Kyu Sung Han, So Yeong Byun, Tam Tran, Myong Jun Kim Recovery of Fine Aluminum Hydroxide with High Whiteness Index from Low Quality Bauxite Using Caustic Roasting and Water Leaching 2018 56 1 49 10.3365/KJMM.2018.56.1.49 Thi Thuy Nhi Nguyen, Man Seung Lee Improvement of Alumina Dissolution from the Mechanically Activated Dross Using Ultrasound-Assisted Leaching Korean Journal of Metals and Materials 2019 57 3 154 10.3365/KJMM.2019.57.3.154
175 Bo-Ra Jin, Chang-Yeol Jeong Effect of Alloying Elements on the Low-Cycle Fatigue Properties of Al-Si-Mg-(Cu) Alloys for the Cylinder Head of a Passenger Diesel Engine 2016 54 9 626 10.3365/KJMM.2016.54.9.626 Bo-Ra Jin, Dong-Woog Ha, Chang-Yeol Jeong Effect of Solution Treatment on the Hardness and Tensile Properties of Al–Mg–Si Alloys for Automotive Chassis MATERIALS TRANSACTIONS 2019 10.2320/matertrans.M2018368
176 Yurim Lee, Heesoo Choi, Soojin Ahn, Cheoljoo Lee, Sangshik Kim Resistance to Stress Corrosion Cracking of High-Strength 7xxx Series Aluminum Alloys in 3.5% NaCl Solution 2018 56 10 708 10.3365/KJMM.2018.56.10.708 Woojin An, Dohee Kim, Bong-Hwan Kim, Shae Kwang Kim, Sangshik Kim, Hyokyung Sung Effects of Exposure Temperature on Tensile and Charpy Impact Properties of the 7xxx Aluminum Alloy for Aerospace Applications Korean Journal of Metals and Materials 2019 57 4 214 10.3365/KJMM.2019.57.4.214
177 In-Jin Shon Effect of Graphene Addition on the Mechanical Properties of TiO2 2017 55 2 110 10.3365/KJMM.2017.55.2.110 Jin Woo Kim, Bora Ye, Minwoo Lee, Bora Jung, Duck Hyun Lee, Heesoo Lee, Hong-Dae Kim Adsorption / Desorption Performance and NOx Removal Efficiency of BaO Loaded V2O5-WO3/TiO2 Selective Catalytic Reduction Catalyst Korean Journal of Metals and Materials 2019 57 4 270 10.3365/KJMM.2019.57.4.270
178 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 Jin Woo Kim, Bora Ye, Minwoo Lee, Bora Jung, Duck Hyun Lee, Heesoo Lee, Hong-Dae Kim Adsorption / Desorption Performance and NOx Removal Efficiency of BaO Loaded V2O5-WO3/TiO2 Selective Catalytic Reduction Catalyst Korean Journal of Metals and Materials 2019 57 4 270 10.3365/KJMM.2019.57.4.270
179 Sol-Bin Park, In-Jae Lee, Il-Ho Kim Thermoelectric Properties of Ge-doped Higher Manganese Silicides MnSi1.72-1.73:Gem 2018 56 9 693 10.3365/KJMM.2018.56.9.693 In-Jae Lee, Sol-Bin Park, Soon-Chul Ur, Kyung-Wook Jang, Il-Ho Kim Thermoelectric Properties of MnSi1.74-1.75:Gem Prepared by Solid-State Reaction and Hot Pressing Korean Journal of Metals and Materials 2019 57 4 264 10.3365/KJMM.2019.57.4.264
180 Woon-Seop Choi Effect of Zn Doping on an Inkjet-Printed Metal Oxide Thin-Film Transistor at Low Temperature of 200 oC 2019 57 3 170 10.3365/KJMM.2019.57.3.170 Woon-Seop Choi Doping Effect of Indium on Zinc-tin Oxide Thin-Film Transistor Using Electrohydrodynamic Jet Spray Technology Korean Journal of Metals and Materials 2019 57 4 258 10.3365/KJMM.2019.57.4.258
181 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Honoka Obata, Katsuyuki Minegishi, Kotaro Nagatsu, Ming-Rong Zhang, Atsushi Shinohara Production of 191Pt from an iridium target by vertical beam irradiation and simultaneous alkali fusion Applied Radiation and Isotopes 2019 149 31 10.1016/j.apradiso.2019.04.007
182 Muhammad Ali Abro, Junhee Hahn, Dong Bok Lee High-temperature Oxidation of Hot-dip Aluminized 2.25Cr-1Mo Steel 2018 56 5 350 10.3365/KJMM.2018.56.5.350 Muhammad Ali Abro, Junhee Hahn, Dong Bok Lee Corrosion of Hot-dip Aluminized 9Cr-1Mo Steel in N2/0.1%H2S Gas Korean Journal of Metals and Materials 2019 57 4 236 10.3365/KJMM.2019.57.4.236
183 Seho Kee, Wonjoong Kim, Jaepil Jung, Minhyung Choi Effect of Via Pitch on the Extrusion Behavior of Cu-filled TSV 2018 56 6 449 10.3365/KJMM.2018.56.6.449 Se-Ho Kee, Won-Joong Kim, Jae-Pil Jung Copper-silicon carbide composite plating for inhibiting the extrusion of through silicon via (TSV) Microelectronic Engineering 2019 214 5 10.1016/j.mee.2019.04.019
184 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Wei Dong Xing, Man Seung Lee A Process for the Separation of Noble Metals from HCl Liquor Containing Gold(III), Palladium(II), Platinum(IV), Rhodium(III), and Iridium(IV) by Solvent Extraction Processes 2019 7 5 243 10.3390/pr7050243
185 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Wei Dong Xing, Man Seung Lee A Process for the Separation of Noble Metals from HCl Liquor Containing Gold(III), Palladium(II), Platinum(IV), Rhodium(III), and Iridium(IV) by Solvent Extraction Processes 2019 7 5 243 10.3390/pr7050243
186 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Sudeshna Saha, Manisha Venkatesh, Hirakendu Basu, Mehzabin Vivek Pimple, Rakesh Kumar Singhal Recovery of gold using graphene oxide/calcium alginate hydrogel beads from a scrap solid state detector Journal of Environmental Chemical Engineering 2019 7 3 103134 10.1016/j.jece.2019.103134
187 Jae-hyun Lee, Seong-Jun Park, Joonoh Moon, Jun-Yun Kang, Jun-Young Park, Tae-Ho Lee, Kyung Mox Cho Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels 2017 55 5 363 10.3365/KJMM.2017.55.5.363 Jae Ik Yoon, Jaimyun Jung, Hak Hyeon Lee, Jin You Kim, Hyoung Seop Kim Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels Metals and Materials International 2019 25 5 1161 10.1007/s12540-019-00270-x
188 Han-Sang Kim, Sung-Jin Kim Influence of the Thickness of TiO2/TiO2-x Layers on the Behavior of a Memristor Device 2019 57 2 84 10.3365/KJMM.2019.57.2.84 Yu-Sung Kim, Jin-Young Choi, Yun-Je Park, Su-Hyeon Choe, Young-Min Kong, Daeil Kim Influence of Film Thickness on the Electrical and Optical Properties of ZnO/Ag/SnO2 Tri-Layer Films Korean Journal of Metals and Materials 2019 57 5 324 10.3365/KJMM.2019.57.5.324
189 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Jong-hyoung Kim, Jinwoo Lee, Woojoo Kim, Jongheon Kim, Seung-Kyun Kang, Dongil Kwon Characterization of Viscoelastic Behavior of Poly(dimethylsiloxane) by Nanoindentation Korean Journal of Metals and Materials 2019 57 5 289 10.3365/KJMM.2019.57.5.289
190 Daehan Jang, Kwangyoon Kim, Hyoung Chan Kim, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim Evaluation of Mechanical Property for Welded Austenitic Stainless Steel 304 by Following Post Weld Heat Treatment 2017 55 9 664 10.3365/KJMM.2017.55.9.664 I.K. Heo, D.H. Yoon, J.H. Kim, H.C. Kim, K.D. Kim Fatigue crack propagation behavior in AISI 304 steel welded joints for cold‐stretched liquefied natural gas (LNG) storage tank at cryogenic temperatures Materialwissenschaft und Werkstofftechnik 2019 50 5 580 10.1002/mawe.201800193
191 Tong Yul Cho, Jae Hong Yoon, Sang Hwan Yoon, Yun Kon Joo, Won Ho Choi, Young Bok Son The Effects of Particle Size on the Surface Properties of an HVOF Coating of WC-Co 2017 55 4 227 10.3365/KJMM.2017.55.4.227 Rajab Ali Seraj, Amir Abdollah-zadeh, Sergi Dosta, Hamid Assadi, Irene Garcia Cano Comparison of Stellite coatings on low carbon steel produced by CGS and HVOF spraying Surface and Coatings Technology 2019 372 299 10.1016/j.surfcoat.2019.05.022
192 Woo Hyeon Jo, Dooho Choi Optimization of ZnO/Ag/ZnO Transparent Conductive Electrodes Fabricated by Magnetron Sputtering 2019 57 2 91 10.3365/KJMM.2019.57.2.91 Eunwook Jeong, Gun-Hwan Lee, Young-Rae Cho, Jungheum Yun Optimization of Flexible, Transparent TiO2/Cu/ZnO Electrodes by Simultaneous Suppression of Optoelectrical Losses and Pinhole Formation Korean Journal of Metals and Materials 2019 57 5 316 10.3365/KJMM.2019.57.5.316
193 Jioh Shin, Ashutosh Sharma, Do-hyun Jung, Jae Pil Jung Effect of Sn Content on Filler and Bonding Characteristics of Active Metal Brazed Cu/Al2O3 Joint 2018 56 5 366 10.3365/KJMM.2018.56.5.366 Ashutosh Sharma, Do Hyun Jung, Ju Seon Cheon, Jae Pil Jung Epoxy Polymer Solder Pastes for Micro-Electronic Packaging Applications Journal of Welding and Joining 2019 37 2 7 10.5781/JWJ.2019.37.2.2
194 Min Soo Kim, Seung Zeon Han, Jehyun Lee, Sung Hwan Lim, Jee Hyuk Ahn, Sang-Shik Kim, Kwang Ho Kim Mechanical Properties of Discontinuous Precipitated Al-Zn Alloys after Drawing at Room and Cryogenic Temperatures 2017 55 2 77 10.3365/KJMM.2017.55.2.77 Yang Zhou, Fei Zhou, Joao Marcos Ribeiro Martins, Philip Nash, Jun Wang The effect of discontinuous γ' precipitation on the mechanical properties of Al-Co-Ni alloys Materials Characterization 2019 151 612 10.1016/j.matchar.2019.04.003
195 Junyeong Jeong, Sang-Cheon Park, Ga-Young Shin, Chang Wook Lee, Tae-Jeong Kim, Min-Su Choi Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel 2018 56 11 787 10.3365/KJMM.2018.56.11.787 Woochang Jeong Study on Shape Optimization of Automotive Door Impact Beam for Light Weight Design and Improved Crash Performance Korean Journal of Metals and Materials 2019 57 6 381 10.3365/KJMM.2019.57.6.381
196 Young-Jun Song Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process 2018 56 10 755 10.3365/KJMM.2018.56.10.755 Deokhyun Han, Iljeong Park, Minjun Kim, Daeweon Kim, Hangchul Jung Study on the Optimum Conditions for Synthesizing a Cathode Active Material Precursor in Li-Ion Batteries Using a Taylor Reactor Korean Journal of Metals and Materials 2019 57 6 360 10.3365/KJMM.2019.57.6.360
197 Ho Jung Lee, Seungjin Oh, Hongdeok Kim Comparison of Microstructure and Residual Stress Affecting Stress Corrosion Cracking Susceptibility of Austenitic Stainless Steel Tubes 2019 57 1 51 10.3365/KJMM.2019.57.1.51 Myeonghwan Choi, Junghoon Lee, Hyunbin Nam, Namhyun Kang, Myeonghyun Kim, Daewon Cho Tensile and Microstructural Characteristics of Fe-24Mn Steel Welds for Cryogenic Applications Metals and Materials International 2020 26 2 240 10.1007/s12540-019-00320-4
198 Ye-Eun Cha, Il-Ho Kim Thermoelectric Properties of Partially Double-filled (Ce1-zNdz)yFe4-xCoxSb12 Skutterudites 2018 56 6 465 10.3365/KJMM.2018.56.6.465 Ye-Eun Cha, Il-Ho Kim Synthesis and Thermoelectric Properties of (La1−zNdz)0.8Fe4−xCoxSb12 Skutterudites Korean Journal of Metals and Materials 2019 57 6 366 10.3365/KJMM.2019.57.6.366
199 CheolMin Kwon, Gil-Geun Lee, Gook-Hyun Ha Carbothermal Reduction of Oxide of WC/Co Hardmetal Scrap 2016 54 10 743 10.3365/KJMM.2016.54.10.743 Longgang Ye, Zhen Ouyang, Shufen Liu, Chaobo Tang Removal of Iron from Polluted Tungsten Powder by Acid Leaching for Recovery of Tungsten JOM 2020 72 2 933 10.1007/s11837-019-03496-7
200 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Régis Mastretta, Rémi Poirot, Damien Bourgeois, Daniel Meyer Palladium Isolation and Purification from Nitrate Media: Efficient Process Based on Malonamides Solvent Extraction and Ion Exchange 2019 37 2 140 10.1080/07366299.2019.1630073
201 Jioh Shin, Ashutosh Sharma, Do-hyun Jung, Jae Pil Jung Effect of Sn Content on Filler and Bonding Characteristics of Active Metal Brazed Cu/Al2O3 Joint 2018 56 5 366 10.3365/KJMM.2018.56.5.366 Shanshan Zhang, Luchun Yan, Kewei Gao, Huisheng Yang, Yanbin Wang Finite element analysis of the effect of TiC or graphite modified composite fillers on the thermal residual stress of AMB ceramic substrates Ceramics International 2019 45 15 19098 10.1016/j.ceramint.2019.06.155
202 Ye-Eun Cha, Il-Ho Kim Thermoelectric Properties of Partially Double-filled (Ce1-zNdz)yFe4-xCoxSb12 Skutterudites 2018 56 6 465 10.3365/KJMM.2018.56.6.465 Woo Hyun Nam, Weon Ho Shin, Jung Young Cho, Won-Seon Seo Current Status of Nanostructured Thermoelectric Materials for Mid-High Temperature Applications Ceramist 2019 22 2 133 10.31613/ceramist.2019.22.2.04
203 Tae-Hoon Kang, Kyu-Sik Kim, Soon-Hong Park, Kee-Ahn Lee Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process 2018 56 6 423 10.3365/KJMM.2018.56.6.423 Sung Yong Chang, Ki-Yong Oh Evolution of Microstructure and Mechanical Characteristics in Rejuvenation of a Hot Gas Pass Component of a Gas Turbine by Heat Treatment and HIP Korean Journal of Metals and Materials 2019 57 7 468 10.3365/KJMM.2019.57.7.468
204 Dongguo Lin, Sangyul Ha, Youngho Shin, Dong Yong Park, Seong Jin Park, Sung Taek Chung, Ravi Bollina, Seongkyu See Experimental and Simulation Analysis of Hot Isostatic Pressing of Gas Atomized Stainless Steel 316L Powder Compacts 2016 54 10 732 10.3365/KJMM.2016.54.10.732 Seung-Hwan Jeon, Yaejin Hong, Hyukhyun Ryu, Won-Jae Lee Photoelectrochemical Properties of Copper Oxide Photoelectrode with Various Copper Oxide Buffer Layers Korean Journal of Metals and Materials 2019 57 7 447 10.3365/KJMM.2019.57.7.447
205 Cheol-Woo Kim, Young-Chan Kim, Jung-Han Kim, Jae-Ik Cho, Min-Suk Oh Effect of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting 2018 56 11 805 10.3365/KJMM.2018.56.11.805 Tae-woo Hwang, Sang-wook Han, Il-yeong Oh, Young-hoon Moon Characterization of the Laser Surface Nitriding of Ti-6Al-4V Alloys in Nitric Acid Solution and Nitrogen Gas Atmosphere Korean Journal of Metals and Materials 2019 57 7 412 10.3365/KJMM.2019.57.7.412
206 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Tae-woo Hwang, Sang-wook Han, Il-yeong Oh, Young-hoon Moon Characterization of the Laser Surface Nitriding of Ti-6Al-4V Alloys in Nitric Acid Solution and Nitrogen Gas Atmosphere Korean Journal of Metals and Materials 2019 57 7 412 10.3365/KJMM.2019.57.7.412
207 Suncheol Kwon, Jongho Shin, Geunyoung Rim, Gitae Sung, Byunggwan Yoon, Euisuk Jung, Jehyun Lee Microstructural Evolution with Solidification Rate and Heat-Treatment of Single Crystal Superalloy CMSX-4 Grown using Seed 2018 56 10 745 10.3365/KJMM.2018.56.10.745 Sung Yong Chang, Ki-Yong Oh Evolution of Microstructure and Mechanical Characteristics in Rejuvenation of a Hot Gas Pass Component of a Gas Turbine by Heat Treatment and HIP Korean Journal of Metals and Materials 2019 57 7 468 10.3365/KJMM.2019.57.7.468
208 Tae Chang Park, Beom Seok Kim, Tae Young Kim, Il Bong Jin, Yeong Koo Yeo Comparative Study of Estimation Methods of the Endpoint Temperature in Basic Oxygen Furnace Steelmaking Process with Selection of Input Parameters 2018 56 11 813 10.3365/KJMM.2018.56.11.813 Aidong Hou, Shengli Jin, Dietmar Gruber, Harald Harmuth Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining Applied Sciences 2019 9 14 2835 10.3390/app9142835
209 Sol-Bin Park, In-Jae Lee, Il-Ho Kim Thermoelectric Properties of Ge-doped Higher Manganese Silicides MnSi1.72-1.73:Gem 2018 56 9 693 10.3365/KJMM.2018.56.9.693 Li Wang, Jin-Min Zhang, Ten He, Kun Wang, Quan Xie First principle study on the effect of the photoelectric properties of (La, Ce)-doping Mn4Si7 Materials Research Express 2019 6 9 096309 10.1088/2053-1591/ab2f15
210 Jongho Shin, Changhoon Sung, Suncheol Kwon, Sukhwan Kwon, Byungmoon Chang, Jehyun Lee Prediction of Primary Dendrite Arm Spacing with Solidification Velocity and Temperature Gradient during Directional Solidification in CMSX-4 Superalloy 2018 56 9 674 10.3365/KJMM.2018.56.9.674 Sung Yong Chang, Ki-Yong Oh Evolution of Microstructure and Mechanical Characteristics in Rejuvenation of a Hot Gas Pass Component of a Gas Turbine by Heat Treatment and HIP Korean Journal of Metals and Materials 2019 57 7 468 10.3365/KJMM.2019.57.7.468
211 Youngseok Song, Jinik Suk, Chung-Yun Kang Microstructural Changes of 22Cr-9Mo-3Fe-4Nb Ni-Base Superalloy during Creep 2017 55 7 486 10.3365/KJMM.2017.55.7.486 Seok-Hyeon Kang, Sukjin Lee, Jin-Yoo Suh, Han-Jin Kim, Young-Kook Lee Self-healing behavior of Inconel 617B superalloy Journal of Alloys and Compounds 2019 805 1217 10.1016/j.jallcom.2019.07.204
212 Sungjin Oh, Hyukhyun Ryu, Won-Jae Lee Study of the Morphological, Structural, Optical and Photoelectrochemical Properties of Zinc Oxide Nanorods Grown Using a Microwave Chemical Bath Deposition Method 2017 55 4 255 10.3365/KJMM.2017.55.4.255 Seung-Hwan Jeon, Yaejin Hong, Hyukhyun Ryu, Won-Jae Lee Photoelectrochemical Properties of Copper Oxide Photoelectrode with Various Copper Oxide Buffer Layers Korean Journal of Metals and Materials 2019 57 7 447 10.3365/KJMM.2019.57.7.447
213 Junhyeob Oh, Daeyoung Jo, Hongkyu Kim, Jondo Yun Growth Rate of Gamma Prime Precipitates in Ni-Base Superalloy 2018 56 1 8 10.3365/KJMM.2018.56.1.8 Seok-Hyeon Kang, Sukjin Lee, Jin-Yoo Suh, Han-Jin Kim, Young-Kook Lee Self-healing behavior of Inconel 617B superalloy Journal of Alloys and Compounds 2019 805 1217 10.1016/j.jallcom.2019.07.204
214 Byung Hak Choe, Hyeon Su Jang, Bum Gyu Lee, Eui Soo Kim, Woo Sik Kim, Un Bong Baek, Sung Hoon Nam Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test 2018 56 1 1 10.3365/KJMM.2018.56.1.1 Kijung Park, Dae Hyun Cho, Min-Ho Park, Cheol-Woong Yang Effects of Molybdenum on HIC Susceptibility in Normalized Pressure Vessel Steels for Sour Service Applications Korean Journal of Metals and Materials 2019 57 7 405 10.3365/KJMM.2019.57.7.405
215 Eun Hye Hwang, Hwan Goo Seong, Sung Jin Kim Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications 2018 56 8 570 10.3365/KJMM.2018.56.8.570 Jacek Karliński, Mariusz Ptak, Leszek Chybowski A Numerical Analysis of the Working Machine Tyre Inflation Process to Ensure Operator Safety Energies 2019 12 15 2971 10.3390/en12152971
216 Muhammad Ali Abro, Junhee Hahn, Dong Bok Lee High-temperature Oxidation of Hot-dip Aluminized 2.25Cr-1Mo Steel 2018 56 5 350 10.3365/KJMM.2018.56.5.350 DONG BOK LEE, JUNHEE HAHN, MUHAMMAD ALI ABRO HIGH-TEMPERATURE OXIDATION OF HOT-DIP ALUMINIZED P23 STEEL Surface Review and Letters 2020 27 05 1950153 10.1142/S0218625X19501531
217 Jae-Hong Kwon, Eui-Hyuk Kwon, Ki-Woo Lee, Kang-Min Kim, Ji-A Lee, Jeong-Whan Han Effect of Basicity on the Reduction Behavior of Carbon Composite Iron Oxide Briquette 2016 54 11 846 10.3365/KJMM.2016.54.11.846 Kang-Min Kim, Jong-Ho Bae, Jong-In Park, Jeong-Whan Han Segregation Charging Behavior of Ultra-Fine Iron Ore Briquette in Sinter Feed Bed: DEM Analysis Metals and Materials International 2020 26 8 1218 10.1007/s12540-019-00415-y
218 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Photocatalytic Characterization of TiO2 Nanotubes with Pd Particles Synthesized by Photoreduction Process Korean Journal of Metals and Materials 2019 57 8 510 10.3365/KJMM.2019.57.8.510
219 Eun Hye Hwang, Hwan Goo Seong, Sung Jin Kim Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications 2018 56 8 570 10.3365/KJMM.2018.56.8.570 Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel Korean Journal of Metals and Materials 2019 57 8 491 10.3365/KJMM.2019.57.8.491
220 Gyeong Yun Baek, Gwang Yong Shin, Ki Yong Lee, Do Sik Shim A Study on Micro-Structure and Wear Behavior of AISI M4 and CPM15V Deposited by Laser Melting 2018 56 6 430 10.3365/KJMM.2018.56.6.430 Wook Jin Oh, Yong Son, Do Sik Shim Effect of In-Situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition Korean Journal of Metals and Materials 2019 57 8 543 10.3365/KJMM.2019.57.8.543
221 Sanghoo Park, Sumin Kim, Daeun Lee, Soojin Ahn, Sangshik Kim Effect of Microstructural Factors on Fatigue and Fatigue Crack Propagation Behaviors of Mill-Annealed Ti-6Al-4V Alloy 2018 56 12 845 10.3365/KJMM.2018.56.12.845 Ghozali Suprobo, Nokeun Park, Eung Ryul Baek Effect of double stage solution treatment on the volume fraction of massive phase (αm) as a new method to obtain a fine lamellar α/β in Ti–6Al–4V alloy Intermetallics 2019 113 106581 10.1016/j.intermet.2019.106581
222 Han-Sang Kim, Sung-Jin Kim Influence of the Thickness of TiO2/TiO2-x Layers on the Behavior of a Memristor Device 2019 57 2 84 10.3365/KJMM.2019.57.2.84 Su-Hyeon Choe, Yu-Sung Kim, Jin-Young Choi, Yun-Je Park, Byung-Chul Cha, Young-Min Kong, Daeil Kim Effects of Rapid Thermal Annealing on the Structural, Optical, and Electrical Properties of ZnO/Ag/SnO2 Tri-Layer Films Korean Journal of Metals and Materials 2019 57 8 506 10.3365/KJMM.2019.57.8.506
223 Hayoung Choi, Hyukhyun Ryu, Won-Jae Lee Study of the Morphological, Structural and Photoelectrochemical Properties of TiO2 Nanorods grown by Hydrothermal Method 2017 55 1 46 10.3365/KJMM.2017.55.1.46 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Photocatalytic Characterization of TiO2 Nanotubes with Pd Particles Synthesized by Photoreduction Process Korean Journal of Metals and Materials 2019 57 8 510 10.3365/KJMM.2019.57.8.510
224 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Chang Geun Oh, Seong Ho Son, Man Seung Lee Separation of Tb(III) and Dy(III) from Chloride Solution by Extraction and Scrubbing with Ionic Liquid Prepared with Cyanex 272 and Aliquat 336 Korean Journal of Metals and Materials 2019 57 8 499 10.3365/KJMM.2019.57.8.499
225 In-Jin Shon Effect of Graphene Addition on the Mechanical Properties of TiO2 2017 55 2 110 10.3365/KJMM.2017.55.2.110 Xue Li, Terry Arthur Ring, Byung-Sang Choi Thermal Conductivity of Three-Dimensionally Interconnected Graphene-Networked Cu Composite Fabricated by a Simple Two-Step Process Korean Journal of Metals and Materials 2019 57 8 529 10.3365/KJMM.2019.57.8.529
226 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Janu Ageng Nugroho, Dennis Edgard Jodi, Nokeun Park, Sungwook Kim, Unhae Lee, Eung Ryul Baek Effects of Tungsten-Carbide Particle Addition on Friction-Stir-Processed Fe50(CoCrMnNi)50 Medium-Entropy Alloy JOM 2019 71 10 3452 10.1007/s11837-019-03719-x
227 Won-Jong Ji, Seong-Hoon Lee, Young-Hoon Moon The Effect of Mixed Slurry of Fe and Graphite on the Characteristics of Laser Carburized Surface 2017 55 1 16 10.3365/KJMM.2017.55.1.16 Tae-woo Hwang, Sang-wook Han, Il-yeong Oh, Young-hoon Moon Characterization of the Laser Surface Nitriding of Ti-6Al-4V Alloys in Nitric Acid Solution and Nitrogen Gas Atmosphere Korean Journal of Metals and Materials 2019 57 7 412 10.3365/KJMM.2019.57.7.412
228 Byung Hak Choe, Hyeon Su Jang, Bum Gyu Lee, Eui Soo Kim, Woo Sik Kim, Un Bong Baek, Sung Hoon Nam Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test 2018 56 1 1 10.3365/KJMM.2018.56.1.1 Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel Korean Journal of Metals and Materials 2019 57 8 491 10.3365/KJMM.2019.57.8.491
229 Byung Hak Choe, Hyeon Su Jang, Bum Gyu Lee, Eui Soo Kim, Woo Sik Kim, Un Bong Baek, Sung Hoon Nam Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test 2018 56 1 1 10.3365/KJMM.2018.56.1.1 Chang Geun Oh, Seong Ho Son, Man Seung Lee Separation of Tb(III) and Dy(III) from Chloride Solution by Extraction and Scrubbing with Ionic Liquid Prepared with Cyanex 272 and Aliquat 336 Korean Journal of Metals and Materials 2019 57 8 499 10.3365/KJMM.2019.57.8.499
230 Hoai Thanh Truong, Yong Hwan Kim, Man Seung Lee Solvent Extraction of Tungsten(VI) from Moderate Hydrochloric Acid Solutions with LIX 63 2017 55 6 405 10.3365/KJMM.2017.55.6.405 Chang Geun Oh, Seong Ho Son, Man Seung Lee Separation of Tb(III) and Dy(III) from Chloride Solution by Extraction and Scrubbing with Ionic Liquid Prepared with Cyanex 272 and Aliquat 336 Korean Journal of Metals and Materials 2019 57 8 499 10.3365/KJMM.2019.57.8.499
231 Ga-Ryung Kim, Young-Kyun Kim, Hyung-Jun Kim, Kee-Ahn Lee Effect of Carrier Gas on Microstructure and Macroscopic Properties of Tantalum Coating Layer Manufactured by Kinetic Spray Process 2018 56 5 360 10.3365/KJMM.2018.56.5.360 Sung Taek Park, Ju Yeong Kim, Gwang Lyeon Kim, Hyun-Su Kang, Kyeong Won Oh, Hyung-Ki Park, Yi Hwa Song Study of Shape and Microstructure Changes of Ta Linear for Building an Explosively Formed Penetrator Korean Journal of Metals and Materials 2019 57 8 475 10.3365/KJMM.2019.57.8.475
232 Inkang Heo, Donghyun Yoon, Sanghyun Hong, Jinyeol Kim, Jaehoon Kim, Sungho Chang, Siyeon Bae Microstructure Evaluation and Low Cycle Fatigue Damage due to Degradation of Ni-based Superalloy 2018 56 8 561 10.3365/KJMM.2018.56.8.561 V. Krutsilo, N. Krotinov, A. Samboruk Thermoplastic hardening of gas turbine engines blades Materials Today: Proceedings 2019 19 2374 10.1016/j.matpr.2019.08.036
233 Su Mi Jo, Bong Sun You, Young Min Kim Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets 2018 56 10 734 10.3365/KJMM.2018.56.10.734 Su Jin Lee, Ye Jin Kim, Jeong Hun Lee, Sung Hyuk Park Effect of Rolling Temperature on the Microstructural Characteristics of High-Speed-Rolled Mg Alloy with Initial Non-Basal Texture Korean Journal of Metals and Materials 2019 57 8 482 10.3365/KJMM.2019.57.8.482
234 Jong-Gu Kim, Jae-Hoon Ju, Dong-Yong Kim, Sung Hyuk Park, Young-Rae Cho Thermal Conductivity of Double-Layer Clad Metals along the Thickness Direction Using Light Flash Analysis and Estimation Models 2017 55 7 523 10.3365/KJMM.2017.55.7.523 Young-Wook Cho, Byung-Dong Hahn, Ju Ho Lee, Sung Hyuk Park, Ju-Hwan Baeg, Young-Rae Cho Effect of Thermal Grease on Thermal Conductivity for Mild Steel and Stainless Steel by ASTM D5470 Korean Journal of Materials Research 2019 29 7 443 10.3740/MRSK.2019.29.7.443
235 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Hyeong Hun Ahn, Man Seung Lee Adsorption of Pd(II) onto Zr(IV) Based Metal-Organic Framework UIO-66-NH2 from Hydrochloric Acid Solution Korean Journal of Metals and Materials 2019 57 9 589 10.3365/KJMM.2019.57.9.589
236 Sang Won Lee, Sang-Hoon Kim, Sung Hyuk Park Tensile Properties at Room and Elevated Temperatures and High-Cycle Fatigue Properties of Extruded AZ80 and TAZ711 Alloys 2018 56 10 699 10.3365/KJMM.2018.56.10.699 Guang Zhe Li, Min Young Na, Hye Jung Chang, Pil Ryung Cha, Yu Chan Kim, Hyun Kwang Seok Evaluation of Dynamic Precipitation in Extruded Mg-Zn Alloy Korean Journal of Metals and Materials 2019 57 9 555 10.3365/KJMM.2019.57.9.555
237 Myoung Youp Song, Eunho Choi, Young Jun Kwak Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling 2018 56 8 620 10.3365/KJMM.2018.56.8.620 Hyeong Hun Ahn, Man Seung Lee Adsorption of Pd(II) onto Zr(IV) Based Metal-Organic Framework UIO-66-NH2 from Hydrochloric Acid Solution Korean Journal of Metals and Materials 2019 57 9 589 10.3365/KJMM.2019.57.9.589
238 Young-Jun Song Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process 2018 56 10 755 10.3365/KJMM.2018.56.10.755 Se Ah Lee, Man Seung Lee Selective Extraction of Cu(II) from Sulfuric Acid Leaching Solutions of Spent Lithium Ion Batteries Using Cyanex 301 Korean Journal of Metals and Materials 2019 57 9 596 10.3365/KJMM.2019.57.9.596
239 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Se Ah Lee, Man Seung Lee Selective Extraction of Cu(II) from Sulfuric Acid Leaching Solutions of Spent Lithium Ion Batteries Using Cyanex 301 Korean Journal of Metals and Materials 2019 57 9 596 10.3365/KJMM.2019.57.9.596
240 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Se Ah Lee, Man Seung Lee Selective Extraction of Cu(II) from Sulfuric Acid Leaching Solutions of Spent Lithium Ion Batteries Using Cyanex 301 Korean Journal of Metals and Materials 2019 57 9 596 10.3365/KJMM.2019.57.9.596
241 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Min Jung Kim, Sang-Hwan Bak, Junhee Hahn, Seon Jin Kim, Dong Bok Lee High-Temperature Oxidation of Fe-12Cr-0.3C-4Mn-(13-15)Cu Composite Alloys Korean Journal of Metals and Materials 2019 57 9 575 10.3365/KJMM.2019.57.9.575
242 Jeong Hun Lee, Yoo Sei Park, Myeong Je Jang, Sung Min Park, Kyu Hwan Lee, Woo Sung Choi, Sung Mook Choi, Yang Do Kim MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution 2018 56 12 885 10.3365/KJMM.2018.56.12.885 Xiaofeng Lu, Meixuan Li, Huiyuan Wang, Ce Wang Advanced electrospun nanomaterials for highly efficient electrocatalysis Inorganic Chemistry Frontiers 2019 6 11 3012 10.1039/C9QI00799G
243 Sanghoo Park, Sumin Kim, Daeun Lee, Soojin Ahn, Sangshik Kim Effect of Microstructural Factors on Fatigue and Fatigue Crack Propagation Behaviors of Mill-Annealed Ti-6Al-4V Alloy 2018 56 12 845 10.3365/KJMM.2018.56.12.845 Sumin Kim, Taejin Song, Hyokyung Sung, Sangshik Kim Effect of Pre-Straining on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Precipitation Hardened Steel Metals and Materials International 2019 10.1007/s12540-019-00436-7
244 Thi Hong Nguyen, Man Seung Lee Effect of HCl Concentration on the Oxidation of LIX 63 and the Subsequent Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by Solvent Extraction 2016 54 10 768 10.3365/KJMM.2016.54.10.768 Se Ah Lee, Man Seung Lee Selective Extraction of Cu(II) from Sulfuric Acid Leaching Solutions of Spent Lithium Ion Batteries Using Cyanex 301 Korean Journal of Metals and Materials 2019 57 9 596 10.3365/KJMM.2019.57.9.596
245 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Guang Zhe Li, Min Young Na, Hye Jung Chang, Pil Ryung Cha, Yu Chan Kim, Hyun Kwang Seok Evaluation of Dynamic Precipitation in Extruded Mg-Zn Alloy Korean Journal of Metals and Materials 2019 57 9 555 10.3365/KJMM.2019.57.9.555
246 Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process 2019 57 4 227 10.3365/KJMM.2019.57.4.227 Asier Lores, Naiara Azurmendi, Iñigo Agote, Ester Zuza A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics Powder Metallurgy 2019 62 5 267 10.1080/00325899.2019.1669299
247 Young Soo Lim, Soonil Lee Effects of Sb on the Charge Transport and Power Factor of Bi2-xSbxTe3 Thermoelectric Compounds Prepared by Hot Pressing 2017 55 9 651 10.3365/KJMM.2017.55.9.651 Ui Gyeong Hwang, Young Soo Lim Thermoelectric Transport Properties of Interface-Controlled n-type Bismuth Telluride Selenide Composites by Reduced Graphene Oxide Korean Journal of Metals and Materials 2019 57 9 603 10.3365/KJMM.2019.57.9.603
248 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 W. Khalid, M.A. Abbasi, F. Ullah, M. Atif, Z. Ali, K. Nadeem, U. Farooq, F. Amin Fabrication of bifunctional nanocomposite for dye degradation Ceramics International 2020 46 3 2823 10.1016/j.ceramint.2019.09.274
249 Do-Hoon Kim, You-Hwan Lee, Jeoung Han Kim Effect of Second Aging Treatment on the Microstructure and Mechanical Properties of SUH660 Alloy 2016 54 10 716 10.3365/KJMM.2016.54.10.716 Jeoung Han Kim, Nam-Yong Kim, Yu Sik Kong, Nho Kwang Park Microstructure and Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel After Post-Weld Heat-Treatment Journal of Welding and Joining 2019 37 4 313 10.5781/JWJ.2019.37.4.4
250 Gunchoo Shim Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review 2017 55 5 296 10.3365/KJMM.2017.55.5.296 Michael P. Brady, Donovan N. Leonard, Elizabeth A. McNally, Joseph R. Kish, Harry M. Meyer, Ercan Cakmak, Bruce Davis Magnesium Alloy Effects on Plasma Electrolytic Oxidation Electro-Ceramic and Electro-Coat Formation and Corrosion Resistance Journal of The Electrochemical Society 2019 166 14 C492 10.1149/2.0531914jes
251 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Hyeong Hun Ahn, Man Seung Lee Adsorption of Pd(II) onto Zr(IV) Based Metal-Organic Framework UIO-66-NH2 from Hydrochloric Acid Solution Korean Journal of Metals and Materials 2019 57 9 589 10.3365/KJMM.2019.57.9.589
252 Seung-Yong Lee, Sang-In Lee, Byoungchul Hwang Sensitivity of Microstructural Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis 2016 54 9 637 10.3365/KJMM.2016.54.9.637 Joon Sung Choi, Dong Joon Min Cationic Effect of Ferrous Ions on Sulfide Capacity of CaO-FetO-Al2O3-SiO2 Slag System Metallurgical and Materials Transactions B 2019 50 6 2758 10.1007/s11663-019-01699-6
253 Yurim Lee, Heesoo Choi, Soojin Ahn, Cheoljoo Lee, Sangshik Kim Resistance to Stress Corrosion Cracking of High-Strength 7xxx Series Aluminum Alloys in 3.5% NaCl Solution 2018 56 10 708 10.3365/KJMM.2018.56.10.708 Heesoo Choi, Sumin Kim, Hyokyung Sung, Sung-Joon Kim, Sangshik Kim Effect of Cr and N on Stress Corrosion Cracking Behavior of Fe-18Mn Steel Korean Journal of Metals and Materials 2019 57 10 624 10.3365/KJMM.2019.57.10.624
254 Young Soo Lim, Minseok Song, Soonil Lee, Won-Seon Seo Effects of Cu-doping on the Power Factor of Bi0.42Sb1.58Te3 Thermoelectric Compounds Prepared by Hot Pressing 2017 55 6 427 10.3365/KJMM.2017.55.6.427 Hyun Jun Cho, Hyun-Sik Kim, Sang-Il Kim Effect of Cu/In Doping on the Thermoelectric Transport Properties of Bi-Sb-Te Alloys Korean Journal of Metals and Materials 2019 57 10 673 10.3365/KJMM.2019.57.10.673
255 Hyeon-Woo Yang, Jung-Ho Lee, Sang-Chul Jung, Seung-Taek Myung, Woo-Seung Kang, Sun-Jae Kim Fabrication of Si/SiOx Anode Materials by a Solution Reaction-Based Method for Lithium Ion Batteries 2016 54 10 780 10.3365/KJMM.2016.54.10.780 Jueun Lee, Hongil So, Yeonchul Cho, Inhwan Jang, Jaewoo Ahn, Jaeheon Lee A Study on the Separation and Concentration of Li from Li-Containing Waste Solutions by Electrodialysis Korean Journal of Metals and Materials 2019 57 10 656 10.3365/KJMM.2019.57.10.656
256 Ji-Won Baek, Man-Seung Lee Separation of Rhenium(VII) and Vanadium(V) from concentrated HCl solution by solvent extraction with Alamine 336 and LIX 63 2017 55 1 31 10.3365/KJMM.2017.55.1.31 Xueyi Guo, Zhongchen Ma, Dong Li, Dawei Yu Coated impregnated resin containing Alamine 336 for the selective adsorption of ReO4− from sulfuric acid solutions Journal of Molecular Liquids 2020 297 111901 10.1016/j.molliq.2019.111901
257 Myoung Youp Song, Eunho Choi, Young Jun Kwak Development of a Mg-Based Alloy with a Hydrogen-Storage Capacity of 7 wt% by Adding a Polymer CMC via Transformation-Involving Milling 2018 56 5 392 10.3365/KJMM.2018.56.5.392 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
258 Myoung Youp Song, Young Jun Kwak Hydrogen Uptake and Release Characteristics of Mg-xTaF5-xVCl3 (x=1.25, 2.5, and 5) 2018 56 8 611 10.3365/KJMM.2018.56.8.611 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
259 Sang-Min Lee, Ji-Woon Lee, Hyun-Jin Choi, Soong-Keun Hyun High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps 2016 54 11 793 10.3365/KJMM.2016.54.11.793 Alexey Alkhimenko, S.S. Kolesov, R.V. Kizitov, A.B. Laptev, V.A. Polyansky, I.A. Golubev, A.A. Markov, A. Groysman, S. Webster, A.V. Shakhmatov, A.A. Alkhimenko, R. Badrak, V.V. Burlov, S.Yu. Mushnikova, O.V. Shvetsov, M. Klapper, A. Dam, B. Ghai, Yu.I. K Corrosion testing of experimental steels for oilfield pipelines E3S Web of Conferences 2019 121 01001 10.1051/e3sconf/201912101001
260 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
261 Seong-Hyeon Hong, Young Jun Kwak, Myoung Youp Song Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere 2018 56 1 59 10.3365/KJMM.2018.56.1.59 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
262 Myoung Youp Song, Eunho Choi, Young Jun Kwak Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling 2018 56 8 620 10.3365/KJMM.2018.56.8.620 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
263 Min Soo Kim, Seung Zeon Han, Jehyun Lee, Sung Hwan Lim, Jee Hyuk Ahn, Sang-Shik Kim, Kwang Ho Kim Mechanical Properties of Discontinuous Precipitated Al-Zn Alloys after Drawing at Room and Cryogenic Temperatures 2017 55 2 77 10.3365/KJMM.2017.55.2.77 Ui Gu Kang, Won Jong Nam Evolution of Microstructures and Mechanical Properties of 5052 Aluminum Alloys with Variation of Rolling and Annealing Temperatures Korean Journal of Metals and Materials 2019 57 10 632 10.3365/KJMM.2019.57.10.632
264 Deokhyun Han, Iljeong Park, Minjun Kim, Daeweon Kim, Hangchul Jung Study on the Optimum Conditions for Synthesizing a Cathode Active Material Precursor in Li-Ion Batteries Using a Taylor Reactor 2019 57 6 360 10.3365/KJMM.2019.57.6.360 Yanbin Zhu, Xiaohui Tian, Xuan Zhou, Pengfei Zhang, Natarajan Angulakshmi, Yingke Zhou Controlling the oxygen deficiency for improving the insertion performance of the layered LiNi0.6Co0.2Mn0.2O2 Electrochimica Acta 2019 328 135116 10.1016/j.electacta.2019.135116
265 Kwangsu Choi, Youngbuem Song, Seonghoon Yi, Joon Sik Park Oxidation Behaviors of Alloys Containing β/B2 Phases of Ti-45Al-Mo-Nb Alloys and Evaluation of the Oxidation Behaviors of Si Pack Cementation Coated Alloys 2019 57 3 131 10.3365/KJMM.2019.57.3.131 Shi Yuke, Xiao Xiao, Seong Woong Kim, Jae Keun Hong, Junhee Hahn, Dong Bok Lee High-Temperature Corrosion of Ti-44Al-6Nb-2Cr-0.3Si-0.1C Alloy in 0.2%SO2/Ar Gas Korean Journal of Metals and Materials 2019 57 10 648 10.3365/KJMM.2019.57.10.648
266 Jeong-Ik Kim, Sung-woo Jin, Jinwook Jung, Hyun-Min Sung, Hye-Jin Jeong, Siwook Park, Ju-Won Park, Heung Nam Han Growth Behavior of Intermetallic Compound in Dissimilar Al-Cu Joints Under Direct Current 2017 55 6 372 10.3365/KJMM.2017.55.6.372 Lee, Sharma, Jung, Jung Influence of Arc Brazing Parameters on Microstructure and Joint Properties of Electro-Galvanized Steel Metals 2019 9 9 1006 10.3390/met9091006
267 Hye Ryoung Park, Young Jun Kwak, Myoung Youp Song Increase in the Hydrogen-Sorption Rates and the Hydrogen-Storage Capacity of MgH2 by Adding a Small Proportion of Zn(BH4)2 2017 55 9 657 10.3365/KJMM.2017.55.9.657 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
268 Bo-Young Kim, Se-Hyun Ko, Jae-Chul Lee High-strength Ti Alloy Prepared via Promoting Interstitial-Carbon Diffusion 2017 55 5 342 10.3365/KJMM.2017.55.5.342 Gyeong-Uk Kim, Jin Man Jang, Yong-Dae Kim, Jae-Chul Lee, Wonsik Lee Fabrication of Open-Pored Titanium Foam for Biomedical Implants Korean Journal of Metals and Materials 2019 57 10 679 10.3365/KJMM.2019.57.10.679
269 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling 2018 56 12 878 10.3365/KJMM.2018.56.12.878 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling Korean Journal of Metals and Materials 2019 57 10 663 10.3365/KJMM.2019.57.10.663
270 Xuan-Khoa Huynh, Sun-Woo Bae, Ji Soon Kim in situ Fabrication of Fe-TiB2 Nanocomposite Powder by Planetary Ball Milling and Subsequent Heat-treatment of FeB and TiH2 Powder Mixture 2017 55 1 10 10.3365/KJMM.2017.55.1.10 Lin Zhang, Jianwen Gao, Minghao Huang, Engang Wang Effect of Ce Addition on the As-Cast and As-Forged Microstructure of Fe-TiB2 Composites JOM 2019 71 11 4144 10.1007/s11837-019-03751-x
271 Ji-Goo Heo, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim Effect of Pre-Aging Treatment on Bake-Hardenability of Al-8.0Zn-2.5Mg-2.0Cu Alloy Sheet Fabricated by Twin-Roll Casting Process 2019 57 6 396 10.3365/KJMM.2019.57.6.396 Bin Zhang, Xiaojing Xu, Zheng Liu, Jie Zhang, Yuan Zhuang, Peng Zhang, Rikai Zhang, Hongbo Wei, Xiaopeng Jin, Tianlun Wang Effect of Zn/Mg ratio on T6 state microstructure and properties of Al-xZn-2.6Mg-0.94Cu-0.2Zr-0.8Ti cold extruded aluminum alloy Materials Research Express 2019 6 11 1165d8 10.1088/2053-1591/ab4f9e
272 Kwangsu Choi, Jeong Min Kim, Joon Sik Park, Young-won Kim Microstructural Evolution in Cast and HIP’ed Ingot Material of Beta Gamma TiAl Alloy by Two Step Cooling 2018 56 5 335 10.3365/KJMM.2018.56.5.335 Shi Yuke, Xiao Xiao, Seong Woong Kim, Jae Keun Hong, Junhee Hahn, Dong Bok Lee High-Temperature Corrosion of Ti-44Al-6Nb-2Cr-0.3Si-0.1C Alloy in 0.2%SO2/Ar Gas Korean Journal of Metals and Materials 2019 57 10 648 10.3365/KJMM.2019.57.10.648
273 Sang-In Lee, Seung-Wan Lee, Seok Gyu Lee, Sunghak Lee, Hwan Gyo Jung, Byoungchul Hwang Correlation of Microstructural Factors with the Yield Ratio and Uniform Elongation in API X80 Linepipe Steels 2018 56 6 413 10.3365/KJMM.2018.56.6.413 Tae-Woon Hong, Sang-In Lee, Jae-Hyeok Shim, Junho Lee, Myoung-Gyu Lee, Byoungchul Hwang Effect of Microstructural Factors on the Strength and Deformability of Ferrite-Pearlite Steels with Different Mn and V Contents Korean Journal of Materials Research 2018 28 10 570 10.3740/MRSK.2018.28.10.570
274 Jong-Gu Kim, Jae-Hoon Ju, Byung-Dong Hahn, Sang-Hee Park, Young-Rae Cho Thermal Properties of Two-Layered Materials Composed of Polymer Layer Embedded with AlN Particles on Al Substrate along the Thickness Direction 2017 55 6 446 10.3365/KJMM.2017.55.6.446 Young-Wook Cho, Byung-Dong Hahn, Ju Ho Lee, Sung Hyuk Park, Ju-Hwan Baeg, Young-Rae Cho Effect of Thermal Grease on Thermal Conductivity for Mild Steel and Stainless Steel by ASTM D5470 Korean Journal of Materials Research 2019 29 7 443 10.3740/MRSK.2019.29.7.443
275 Kwanlae Kim Domain Wall Motions in a Near-Morphotropic Pb(Zr,Ti)O3 Under Mechanical Stress Observed by In Situ Piezoresponse Force Microscopy 2019 57 1 38 10.3365/KJMM.2019.57.1.38 Guangming Lu, Suzhi Li, Xiangdong Ding, Jun Sun, Ekhard K. H. Salje Electrically driven ferroelastic domain walls, domain wall interactions, and moving needle domains Physical Review Materials 2019 3 11 10.1103/PhysRevMaterials.3.114405
276 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 Katherina Changanaqui, Enric Brillas, Hugo Alarcón, Ignasi Sirés ZnO/TiO2/Ag2Se nanostructures as photoelectrocatalysts for the degradation of oxytetracycline in water Electrochimica Acta 2020 331 135194 10.1016/j.electacta.2019.135194
277 Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars 2016 54 12 862 10.3365/KJMM.2016.54.12.862 Tae-Woon Hong, Sang-In Lee, Jae-Hyeok Shim, Junho Lee, Myoung-Gyu Lee, Byoungchul Hwang Effect of Microstructural Factors on the Strength and Deformability of Ferrite-Pearlite Steels with Different Mn and V Contents Korean Journal of Materials Research 2018 28 10 570 10.3740/MRSK.2018.28.10.570
278 Seung-Yong Lee, Sang-In Lee, Byoungchul Hwang Sensitivity of Microstructural Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis 2016 54 9 637 10.3365/KJMM.2016.54.9.637 Seung-Wan Lee, In-Hyuk Im, Byoungchul Hwang Effect of Microstructure on the Strain Aging Properties of API X70 Pipeline Steels Korean Journal of Materials Research 2018 28 12 702 10.3740/MRSK.2018.28.12.702
279 Sang-In Lee, Seung-Wan Lee, Seok Gyu Lee, Sunghak Lee, Hwan Gyo Jung, Byoungchul Hwang Correlation of Microstructural Factors with the Yield Ratio and Uniform Elongation in API X80 Linepipe Steels 2018 56 6 413 10.3365/KJMM.2018.56.6.413 Seung-Wan Lee, In-Hyuk Im, Byoungchul Hwang Effect of Microstructure on the Strain Aging Properties of API X70 Pipeline Steels Korean Journal of Materials Research 2018 28 12 702 10.3740/MRSK.2018.28.12.702
280 Moon Kyung Hwang, Il Gu Kim, Bong Ki Ryu Study of Water Resistance of Fe2O3 Doped P2O5–ZnO–Bi2O3 Sealing Glass System 2016 54 8 621 10.3365/KJMM.2016.54.8.621 Jae-Young SHIN, Jaemin CHA, Bong-Ki RYU Effect of Bi2O3 on thermal, chemical durability, and bonding properties of V2O5–P2O5–TeO2 glasses for low-temperature sealing glass Journal of the Ceramic Society of Japan 2018 126 7 557 10.2109/jcersj2.18023
281 Jeong Hun Lee, Yoo Sei Park, Myeong Je Jang, Sung Min Park, Kyu Hwan Lee, Woo Sung Choi, Sung Mook Choi, Yang Do Kim MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution 2018 56 12 885 10.3365/KJMM.2018.56.12.885 Myung Sik Choi, Ali Mirzaei, Jae Hoon Bang, Han Gil Na, Changhyun Jin, Wansik Oum, Seungmin Han, Sang Sub Kim, Hyoun Woo Kim Low-Temperature H2S Sensors Based on Si-Coated SnO2 Nanowires Korean Journal of Metals and Materials 2019 57 11 732 10.3365/KJMM.2019.57.11.732
282 Jae-Won Lee, Bora Park, Sung Jin Kim Corrosion Resistance and Adhesion of Paint Coating Film on Zn-Mg-Al Hot-Dip Galvanized Steel Sheets 2019 57 2 77 10.3365/KJMM.2019.57.2.77 Seung-Hwan Lee, Hoe-Kun Kim, Myeon-Kyu Song, Jung-Wan Kim, Sang-Yul Lee Studies on the Microstructure-Controlled Zn Interlayer for Improving the Adhesion Strength of the Zn/Zn-Mg Double Layer Coating Korean Journal of Metals and Materials 2019 57 11 695 10.3365/KJMM.2019.57.11.695
283 Ji-Hwan Shin, Nabeel Jahanzeb, Min-Seong Kim, Ji-Hyun Hwang, Shi-Hoon Choi Analysis of Deformation and Failure Behaviors of TIG Welded Dissimilar Metal Joints Using Miniature Tensile Specimens 2017 55 2 125 10.3365/KJMM.2017.55.2.125 Young Hyun Oh, Hyun Jung Ryu, Taejung Kim, Minsu Choi, Taeseon Lee Mechanical Performance and Microstructure of Resistance Element Welds of Dissimilar Metals Created with a Headless Rivet Korean Journal of Metals and Materials 2019 57 11 708 10.3365/KJMM.2019.57.11.708
284 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 Xinhua Zheng, Subhabrata Das, Yanhong Gu, Shikai Liu, James Borovilas, Jie Zhao Cadmium sulfide/lead sulfide co-sensitized TiO2 enhances photoelectrochemical performance and corrosion resistance of 304 stainless steel MRS Communications 2019 9 4 1361 10.1557/mrc.2019.151
285 Young-Jun Song Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process 2018 56 10 755 10.3365/KJMM.2018.56.10.755 Jehong Im, Kookjin Heo, Sung-Won Kang, Hyejeong Jeong, Jaekook Kim, Jinsub Lim LiFePO4 Synthesis using Refined Li3PO4 from Wastewater in Li-Ion Battery Recycling Process Journal of The Electrochemical Society 2019 166 15 A3861 10.1149/2.1331915jes
286 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon Mechanical Properties and Fabrication of a Nanostructured Nb-Al2O3 Composite by High Frequency Induction Heating Korean Journal of Metals and Materials 2019 57 11 701 10.3365/KJMM.2019.57.11.701
287 Seong-Eun Kim, In-Jin Shon Rapid Sintering of Nanocrystalline (W,Ti)C-Graphene Composites 2018 56 12 854 10.3365/KJMM.2018.56.12.854 Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon Mechanical Properties and Fabrication of a Nanostructured Nb-Al2O3 Composite by High Frequency Induction Heating Korean Journal of Metals and Materials 2019 57 11 701 10.3365/KJMM.2019.57.11.701
288 Jiajia Wu, Junmo Ahn, Jaeheon Lee Comparative Leaching Study on Conichalcite and Chalcopyrite Under Different Leaching Systems 2019 57 4 245 10.3365/KJMM.2019.57.4.245 Sokić, Marković, Stanković, Kamberović, Štrbac, Manojlović, Petronijević Kinetics of Chalcopyrite Leaching by Hydrogen Peroxide in Sulfuric Acid Metals 2019 9 11 1173 10.3390/met9111173
289 Taeyang Han, Youhan Sohn, Hyunwoo Ha, Mi Yoo, Sangyeol Kim, Sang-ro Lee, Hyun You Kim, Jun Hyun Han Modification of the Amount of CH4 Supplied for the Efficient CH4 Reduction of SnO2 2018 56 5 384 10.3365/KJMM.2018.56.5.384 Hyesung An, Mi Yoo, Hyunwoo Ha, Hyuk Choi, Eunji Kang, Hyun You Kim Efficient Sn Recovery from SnO2 by Alkane (CxHy=2x+2, 0 ≤ x ≤ 4) Reduction Scientific Reports 2019 9 1 10.1038/s41598-019-53389-7
290 Taeyang Han, Youhan Sohn, Hyunwoo Ha, Mi Yoo, Sangyeol Kim, Sang-ro Lee, Hyun You Kim, Jun Hyun Han Modification of the Amount of CH4 Supplied for the Efficient CH4 Reduction of SnO2 2018 56 5 384 10.3365/KJMM.2018.56.5.384 Taeyang Han, Youhan Sohn, Sangyeol Kim, Hyun-Chul Jung, Hyun You Kim, San-ro Lee, Jun Hyun Han Reduction of SnO2 by a Mixed Gas of Methane and Hydrogen Korean Journal of Materials Research 2018 28 12 725 10.3740/MRSK.2018.28.12.725
291 Ji-Won Baek, Man-Seung Lee Separation of Rhenium(VII) and Vanadium(V) from concentrated HCl solution by solvent extraction with Alamine 336 and LIX 63 2017 55 1 31 10.3365/KJMM.2017.55.1.31 E. Quijada-Maldonado, A. Allain, B. Pérez, G. Merlet, R. Cabezas, R. Tapia, J. Romero Selective liquid-liquid extraction of molybdenum (VI) and rhenium (VII) from a synthetic pregnant leach solution: Comparison between extractants and diluents Minerals Engineering 2020 145 106060 10.1016/j.mineng.2019.106060
292 Ji-Hye Choe, A-Yeon Jang, Jeong-Heui Kim, Choong-Heui Chung, Ki-Ha Hong Effects of Dispersion Solvent on the Spray Coating Deposition of Silver Nanowires 2017 55 7 509 10.3365/KJMM.2017.55.7.509 M. A. Mohd Sarjidan, W. H. Abd. Majid Prospect of silver nanowire (AgNW) in development of simple and cost-effective vertical organic light-emitting transistors Applied Physics A 2019 125 12 10.1007/s00339-019-3162-z
293 Young-Sang Cho Fabrication of Porous Titania Particles from Complex Fluids by Spray Drying Process and Their Applications 2017 55 4 264 10.3365/KJMM.2017.55.4.264 Dongmyung Jung, Yongwoo Kwon Investigation of Structure-Property Relations in Porous Metals Using Finite Element Simulation Korean Journal of Metals and Materials 2019 57 11 747 10.3365/KJMM.2019.57.11.747
294 Jioh Shin, Ashutosh Sharma, Do-hyun Jung, Jae Pil Jung Effect of Sn Content on Filler and Bonding Characteristics of Active Metal Brazed Cu/Al2O3 Joint 2018 56 5 366 10.3365/KJMM.2018.56.5.366 S. Mishra, A. Sharma, D. H. Jung, J. P. Jung Recent Advances in Active Metal Brazing of Ceramics and Process Metals and Materials International 2020 26 8 1087 10.1007/s12540-019-00536-4
295 Woo-Jin Cho, Se-Hoon Oh, In-Jin Shon Effect of BN Addition on the Mechanical Properties of AlN 2019 57 5 310 10.3365/KJMM.2019.57.5.310 Pei Yang, Lixiang Wang, Weihua Zhao, Laixin Cai, Yongbao Feng Hot-pressing sintered AlN-BN ceramics with high thermal conductivity and low dielectric loss Ceramics International 2020 46 6 8431 10.1016/j.ceramint.2019.12.077
296 Young Bok Ryu, Man Sig Lee Infrared Spectra and Thermal Properties of Sodium Silicate Solutions 2018 56 1 72 10.3365/KJMM.2018.56.1.72 Hye Jin Kim, Kyu Sung Han, Kwang Taek Hwang, Sahn Nahm, Jin Ho Kim Printability of Thermally and Chemically Stable Silica-Titanium Dioxide Composite Coating Layer Korean Journal of Materials Research 2019 29 10 631 10.3740/MRSK.2019.29.10.631
297 Jioh Shin, Ashutosh Sharma, Do-hyun Jung, Jae Pil Jung Effect of Sn Content on Filler and Bonding Characteristics of Active Metal Brazed Cu/Al2O3 Joint 2018 56 5 366 10.3365/KJMM.2018.56.5.366 Ashutosh Sharma, Byungmin Ahn Brazeability, Microstructure, and Joint Characteristics of ZrO2/Ti-6Al-4V Brazed by Ag-Cu-Ti Filler Reinforced with Cerium Oxide Nanoparticles Advances in Materials Science and Engineering 2019 2019 1 10.1155/2019/8602632
298 Yeonjung Hwang, Chang Wook Lee, Ga-Young Shin, Ji Hong Yoo, Minsu Choi Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel 2019 57 3 193 10.3365/KJMM.2019.57.3.193 Jae-Hoon Nam, Jeongho Han, Young-Kook Lee The Effects of Process Temperatures on the Microstructure and Tensile Properties of Warm-Stamped Nb-Bearing Medium-Mn Steel Metallurgical and Materials Transactions A 2020 51 3 1098 10.1007/s11661-019-05570-w
299 Woo Hyeon Jo, Dooho Choi Optimization of ZnO/Ag/ZnO Transparent Conductive Electrodes Fabricated by Magnetron Sputtering 2019 57 2 91 10.3365/KJMM.2019.57.2.91 Daekyun Kim, Taehyeong Lee, Dooho Choi Optimization of ZnO/Cu/ZnO Flexible Transparent Conductive Electrodes Fabricated by Magnetron Sputtering Korean Journal of Metals and Materials 2019 57 12 795 10.3365/KJMM.2019.57.12.795
300 Tian Liu, Sung-Soo Kim Calculation of Inductance, Capacitance, and Microwave Absorbance of Modified Square Loop Frequency Selective Surface 2017 55 6 412 10.3365/KJMM.2017.55.6.412 Han-Shin Cho, Sung-Soo Kim Microwave Absorbing Properties of Carbonyl Iron Particle Composites with Frequency Selective Surface Korean Journal of Metals and Materials 2019 57 11 741 10.3365/KJMM.2019.57.11.741
301 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Thanh Tuan Tran, Mudassir Iqbal, Man Seung Lee Comparison of the Extraction and Stripping Behavior of Iron (III) from Weak Acidic Solution Between Ionic Liquids and Commercial Extractants Korean Journal of Metals and Materials 2019 57 12 787 10.3365/KJMM.2019.57.12.787
302 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Woo-Jin Cho, Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon Mechanical Properties and Fabrication of 4YSZ-BN Composites by Pulsed Current Activated Sintering Korean Journal of Metals and Materials 2019 57 12 764 10.3365/KJMM.2019.57.12.764
303 Seong-Eun Kim, In-Jin Shon Rapid Sintering of Nanocrystalline (W,Ti)C-Graphene Composites 2018 56 12 854 10.3365/KJMM.2018.56.12.854 Woo-Jin Cho, Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon Mechanical Properties and Fabrication of 4YSZ-BN Composites by Pulsed Current Activated Sintering Korean Journal of Metals and Materials 2019 57 12 764 10.3365/KJMM.2019.57.12.764
304 Deok-Yeong Choi, Ye-Eun Cha, Il-Ho Kim Thermoelectric Properties of P-type (Ce1-zYbz)0.8Fe4-xCoxSb12 Skutterudites 2018 56 11 822 10.3365/KJMM.2018.56.11.822 Ye-Eun Cha, Il-Ho Kim Synthesis and Thermoelectric Properties of Partially Double-Filled Skutterudites (La1−zYbz)0.8Fe4−xCoxSb12 Korean Journal of Metals and Materials 2019 57 12 801 10.3365/KJMM.2019.57.12.801
305 Young Bok Ryu, Man Sig Lee Infrared Spectra and Thermal Properties of Sodium Silicate Solutions 2018 56 1 72 10.3365/KJMM.2018.56.1.72 Hyeon Gon Oh, DongKook Park, Yangdo Kim, Man Sig Lee Effect of P/Al Molar Ratio and Curing Conditions of CBAPC Binder on Flexural Strength and Moisture Resistance of Artificial Sand Core Korean Journal of Metals and Materials 2019 57 12 808 10.3365/KJMM.2019.57.12.808
306 Gunchoo Shim Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review 2017 55 5 296 10.3365/KJMM.2017.55.5.296 Seong-Jun Park, Dae-Young Lim, Jeong-Hwan Song Effect of Plasma Electrolytic Oxidation Conditions on Oxide Coatings Properties of Die-Cast AZ91D Mg Alloy Korean Journal of Materials Research 2019 29 10 609 10.3740/MRSK.2019.29.10.609
307 Junyeong Jeong, Sang-Cheon Park, Ga-Young Shin, Chang Wook Lee, Tae-Jeong Kim, Min-Su Choi Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel 2018 56 11 787 10.3365/KJMM.2018.56.11.787 Seong Guk Son, Yeonjung Hwang, Chang Wook Lee, Ji Hong Yoo, Minsu Choi Effect of Hot Stamping Heat Treatment Temperature on Resistance Spot Weldability of Al-10% Si Coated 30MnB5 Steel Korean Journal of Metals and Materials 2019 57 12 778 10.3365/KJMM.2019.57.12.778
308 Junyeong Jeong, Sang-Cheon Park, Ga-Young Shin, Chang Wook Lee, Tae-Jeong Kim, Min-Su Choi Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel 2018 56 11 787 10.3365/KJMM.2018.56.11.787 Jae-Hoon Nam, Jeongho Han, Young-Kook Lee The Effects of Process Temperatures on the Microstructure and Tensile Properties of Warm-Stamped Nb-Bearing Medium-Mn Steel Metallurgical and Materials Transactions A 2020 51 3 1098 10.1007/s11661-019-05570-w
309 Yeonjung Hwang, Chang Wook Lee, Ga-Young Shin, Ji Hong Yoo, Minsu Choi Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel 2019 57 3 193 10.3365/KJMM.2019.57.3.193 Seong Guk Son, Yeonjung Hwang, Chang Wook Lee, Ji Hong Yoo, Minsu Choi Effect of Hot Stamping Heat Treatment Temperature on Resistance Spot Weldability of Al-10% Si Coated 30MnB5 Steel Korean Journal of Metals and Materials 2019 57 12 778 10.3365/KJMM.2019.57.12.778
310 Joo-eun Lee, Hong-Il So, Yeon-Chul Cho, Jae-Woo Ahn, Hong-in Kim, Jin-young Lee Comparison of Counter Current Extraction Process of Pr & Nd Separation using Cyanex 572 and PC88A 2018 56 8 597 10.3365/KJMM.2018.56.8.597 Bong-Jo Rho, Pan-Pan Sun, Sung-Yong Cho Recovery of neodymium and praseodymium from nitrate-based leachate of permanent magnet by solvent extraction with trioctylphosphine oxide Separation and Purification Technology 2020 238 116429 10.1016/j.seppur.2019.116429
311 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Thanh Tuan Tran, Mudassir Iqbal, Man Seung Lee Comparison of the Extraction and Stripping Behavior of Iron (III) from Weak Acidic Solution Between Ionic Liquids and Commercial Extractants Korean Journal of Metals and Materials 2019 57 12 787 10.3365/KJMM.2019.57.12.787
312 Ye-Eun Cha, Il-Ho Kim Synthesis and Thermoelectric Properties of (La1−zNdz)0.8Fe4−xCoxSb12 Skutterudites 2019 57 6 366 10.3365/KJMM.2019.57.6.366 Ye-Eun Cha, Il-Ho Kim Synthesis and Thermoelectric Properties of Partially Double-Filled Skutterudites (La1−zYbz)0.8Fe4−xCoxSb12 Korean Journal of Metals and Materials 2019 57 12 801 10.3365/KJMM.2019.57.12.801
313 Ye-Eun Cha, Il-Ho Kim Charge Transport and Thermoelectric Properties of (La1−zPrz)0.8Fe4−xCoxSb12 Skutterudites 2018 56 10 772 10.3365/KJMM.2018.56.10.772 Ye-Eun Cha, Il-Ho Kim Synthesis and Thermoelectric Properties of Partially Double-Filled Skutterudites (La1−zYbz)0.8Fe4−xCoxSb12 Korean Journal of Metals and Materials 2019 57 12 801 10.3365/KJMM.2019.57.12.801
314 Han Ul Choi, Ju Sung Jin, Hyung-Tae Lim Effect of Preparation Methods on the Electrochemical Performance of All-solid-state Li-S Batteries 2017 55 7 503 10.3365/KJMM.2017.55.7.503 Gi Hwan Chang, Han Ul Choi, Sung Kang, Jun-Young Park, Hyung-Tae Lim Characterization of limiting factors of an all-solid-state Li-ion battery using an embedded indium reference electrode Ionics 2020 26 3 1555 10.1007/s11581-019-03367-w
315 Seong-Hyeon Hong, Young Jun Kwak, Myoung Youp Song Enhancement of the Hydrogen-Storage Characteristics of Mg by Adding Mg2Ni and Ni to MgH2 via High Energy Ball Milling in Hydrogen Atmosphere 2018 56 1 59 10.3365/KJMM.2018.56.1.59 Myoung Youp Song, Eunho Choi, Young Jun Kwak Nickel, Graphene, and Yttria-Stabilized Zirconia (YSZ)-Added Mg by Grinding in Hydrogen Atmosphere for Hydrogen Storage Metals 2019 9 12 1347 10.3390/met9121347
316 Nokeun Park Precise Flow Stress Analysis for the Occurrence of Dynamic Ferritic Transformation and Dynamic Recrystallization of Austenite in Low Carbon Steel 2018 56 11 779 10.3365/KJMM.2018.56.11.779 Zhiqiang Hu, Kaikun Wang Evolution of Dynamic Recrystallization in 5CrNiMoV Steel during Hot Forming Advances in Materials Science and Engineering 2020 2020 1 10.1155/2020/4732683
317 Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel 2018 56 5 375 10.3365/KJMM.2018.56.5.375 Do Sung Lee, Jung-Min Oh, Jun-Ho Seo, Jae-Won Lim Impurity Removal and Microstructural Analysis of Inconel 718 Refined by Hydrogen Plasma Arc Melting Metals and Materials International 2020 10.1007/s12540-019-00595-7
318 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Ya Liu, Lingen Zhang, Qingming Song, Zhenming Xu Recovery of palladium and silver from waste multilayer ceramic capacitors by eutectic capture process of copper and mechanism analysis Journal of Hazardous Materials 2020 388 122008 10.1016/j.jhazmat.2019.122008
319 Min Su Kim, Yeon Joo Kim, Yong Hwan Kim Effect of Alloying Concentration and Crystal Structure on an Anodic Oxide Layer Formed on Ti-Ni Alloy 2018 56 9 652 10.3365/KJMM.2018.56.9.652 Moo Young Jung, Chang Su Nam, Byung-Sik Lee, Yong Choi Study on the Effect of the Thiourea on Nano-Mechanical Properties and Microstructures of the Electroformed Thin Ni-P Foil Korean Journal of Metals and Materials 2020 58 1 1 10.3365/KJMM.2020.58.1.1
320 Ji-Hwan Shin, Nabeel Jahanzeb, Min-Seong Kim, Ji-Hyun Hwang, Shi-Hoon Choi Analysis of Deformation and Failure Behaviors of TIG Welded Dissimilar Metal Joints Using Miniature Tensile Specimens 2017 55 2 125 10.3365/KJMM.2017.55.2.125 Wi-Geol Seo, Jin-Yoo Suh, Jae-Hyeok Shim, Hansang Lee, Keunbong Yoo, Shi-Hoon Choi Effect of post-weld heat treatment on the microstructure and hardness of P92 steel in IN740H/P92 dissimilar weld joints Materials Characterization 2020 160 110083 10.1016/j.matchar.2019.110083
321 Ji-Goo Heo, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim Effect of Pre-Aging Treatment on Bake-Hardenability of Al-8.0Zn-2.5Mg-2.0Cu Alloy Sheet Fabricated by Twin-Roll Casting Process 2019 57 6 396 10.3365/KJMM.2019.57.6.396 Hee-Ju Kim, Jeki Jung, Su-Hyeon Kim, Cha-Yong Lim, Yoon Suk Choi Effect of Heat Treatment on Mechanical Properties and Energy Absorption Capacity of 7003 Aluminum Alloy Korean Journal of Metals and Materials 2020 58 1 7 10.3365/KJMM.2020.58.1.7
322 Hyeryeong Lee, Kwangbae Kim, Ohsung Song Properties of Perovskite Solar Cells with GO Addition on TiO2 Layer 2019 57 7 456 10.3365/KJMM.2019.57.7.456 Hyeryeong Lee, Kwangbae Kim, Ohsung Song Properties of Double Electron Transport Layered Perovskite Solar Cells with Different ZrO2 Layer Thickness Korean Journal of Metals and Materials 2020 58 1 59 10.3365/KJMM.2020.58.1.59
323 Soo Woo Nam High Temperature Properties and Recent Research Trend of Mg-RE Alloys 2017 55 4 213 10.3365/KJMM.2017.55.4.213 Zhuo Fu, Zhifeng Wang, Guofeng Li, Yu Yao, Hui Yu, Yu Liu, Tianhao Zheng, Hanqing Xiong Microstructure, Mechanical and Corrosion Properties of Mg-1.61Al-1.76Ca Alloy under Different Extrusion Temperatures Journal of Materials Engineering and Performance 2020 29 1 672 10.1007/s11665-020-04557-8
324 Tae-Gyu Woo, Il-Song Park, Kyeong-Won Seol Main Effects of Plating Parameters on Mechanical and Surface Properties of Electroplated Copper 2018 56 6 459 10.3365/KJMM.2018.56.6.459 Tae-Gyu Woo, Il-Song Park Changes in Electrical Properties of Copper-Plated Layer by Organic Additives on High Current Density Korean Journal of Metals and Materials 2020 58 1 41 10.3365/KJMM.2020.58.1.41
325 Tae-woo Hwang, Sang-wook Han, Il-yeong Oh, Young-hoon Moon Characterization of the Laser Surface Nitriding of Ti-6Al-4V Alloys in Nitric Acid Solution and Nitrogen Gas Atmosphere 2019 57 7 412 10.3365/KJMM.2019.57.7.412 Eun-Joon Chun, Changkyoo Park, Wonah Park Study on the Selective Surface Modification of Injection Mold Steels by Laser Materials Processing: Relationship Between AlN Formation and Surface Hardening During Laser Nitriding Korean Journal of Metals and Materials 2020 58 1 32 10.3365/KJMM.2020.58.1.32
326 Jeong Hun Lee, Yoo Sei Park, Myeong Je Jang, Sung Min Park, Kyu Hwan Lee, Woo Sung Choi, Sung Mook Choi, Yang Do Kim MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution 2018 56 12 885 10.3365/KJMM.2018.56.12.885 Sung Min Park, Myeong Je Jang, Yoo Sei Park, Jooyoung Lee, Jae-yeop Jeong, Jaehoon Jung, Min-Kwan Choi, Yu-Seong Noh, Min-Ho Seo, Hyung Ju Kim, Juchan Yang, Yang Do Kim, Sung Mook Choi Synthesis and Characterization of the Cu0.72Co2.28O4 Catalyst for Oxygen Evolution Reaction in an Anion Exchange Membrane Water Electrolyzer Korean Journal of Metals and Materials 2020 58 1 49 10.3365/KJMM.2020.58.1.49
327 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 Yijun Yang, Kwanlae Kim Size Dependency of a ZnO Nanorod-Based Piezoelectric Nanogenerator Evaluated by Conductive Atomic Force Microscopy Korean Journal of Metals and Materials 2020 58 1 67 10.3365/KJMM.2020.58.1.67
328 Tae Wan Park, Hyunsung Jung, Young-Rae Cho, Jung Woo Lee, Woon Ik Park Pattern Formation of Highly Ordered Sub-20 nm Pt Cross-Bar on Ni Thin Film 2018 56 12 910 10.3365/KJMM.2018.56.12.910 Tae Wan Park, Myunghwan Byun, Hyunsung Jung, Woon Ik Park Effect of Surface Roughness on the Formation of Nano-to-Mirco Patterns Using Pattern Transfer Printing Korean Journal of Metals and Materials 2020 58 1 26 10.3365/KJMM.2020.58.1.26
329 Iksoo Ji, Jae-Young Leem Synthesis and Photoluminescence Studies of ZnO Films Using Vapor Phase Transport Combined With Rapid Heating 2016 54 8 609 10.3365/KJMM.2016.54.8.609 Yijun Yang, Kwanlae Kim Size Dependency of a ZnO Nanorod-Based Piezoelectric Nanogenerator Evaluated by Conductive Atomic Force Microscopy Korean Journal of Metals and Materials 2020 58 1 67 10.3365/KJMM.2020.58.1.67
330 Seung Min Ryu, Hwan Goo Seong, Jeong Kil Kim, Joong-Ki Hwang, Man Jae Lee, Min-Suk Oh, Sung Jin Kim Effect of Ni and Cu Addition on Corrosion Behaviors of Pre-Oxidized Ultra-Strong Steel for Automotive Applications 2019 57 6 343 10.3365/KJMM.2019.57.6.343 Ju-Hun Kim, Kang-Min Kim, Ji-A Lee, Jeong-il Kim, Jeong-Whan Han Corrosion Behavior of SiC and Si3N4 by Alkali Gas Korean Journal of Metals and Materials 2020 58 1 17 10.3365/KJMM.2020.58.1.17
331 Su Mi Jo, Bong Sun You, Young Min Kim Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets 2018 56 10 734 10.3365/KJMM.2018.56.10.734 Taein Kong, Byung Je Kwak, Jonghyun Kim, Jeong Hun Lee, Sung Hyuk Park, Ji Hoon Kim, Young Hoon Moon, Hyun Sik Yoon, Taekyung Lee Tailoring strength-ductility balance of caliber-rolled AZ31 Mg alloy through subsequent annealing Journal of Magnesium and Alloys 2020 8 1 163 10.1016/j.jma.2019.11.005
332 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Bong-Jo Rho, Pan-Pan Sun, Sung-Yong Cho Recovery of neodymium and praseodymium from nitrate-based leachate of permanent magnet by solvent extraction with trioctylphosphine oxide Separation and Purification Technology 2020 238 116429 10.1016/j.seppur.2019.116429
333 Tae-Gyu Woo The Effects of Bis(3-Sulfo-Propyl)di-Sulfide (SPS) Additives on the Surface Morphology and Mechanical Properties of Electrolytic Copper Foil 2016 54 9 681 10.3365/KJMM.2016.54.9.681 Tae-Gyu Woo, Il-Song Park Changes in Electrical Properties of Copper-Plated Layer by Organic Additives on High Current Density Korean Journal of Metals and Materials 2020 58 1 41 10.3365/KJMM.2020.58.1.41
334 Sungjin Oh, Hyukhyun Ryu, Won-Jae Lee Study of the Morphological, Structural, Optical and Photoelectrochemical Properties of Zinc Oxide Nanorods Grown Using a Microwave Chemical Bath Deposition Method 2017 55 4 255 10.3365/KJMM.2017.55.4.255 Yijun Yang, Kwanlae Kim Size Dependency of a ZnO Nanorod-Based Piezoelectric Nanogenerator Evaluated by Conductive Atomic Force Microscopy Korean Journal of Metals and Materials 2020 58 1 67 10.3365/KJMM.2020.58.1.67
335 Seong-Min Lee, Yeon-Wook Kim Cleavage Dicing Mechanics in Silicon Wafers 2019 57 11 689 10.3365/KJMM.2019.57.11.689 Seong-Min Lee, Yeon-Wook Kim Mechanism for mitigating filler-induced reliability degradation in semiconductor devices assembled utilizing an LOC package technique Journal of Mechanical Science and Technology 2020 34 2 675 10.1007/s12206-020-0113-8
336 Moon Kyung Hwang, Il Gu Kim, Bong Ki Ryu Study of Water Resistance of Fe2O3 Doped P2O5–ZnO–Bi2O3 Sealing Glass System 2016 54 8 621 10.3365/KJMM.2016.54.8.621 M. Hamed Misbah, H. Doweidar, K. El-Egili, G. El-Damrawi, Maged El-Kemary Structure and some properties of xBaO∙(50-x)PbO∙50P2O5 glasses Journal of Non-Crystalline Solids 2020 534 119945 10.1016/j.jnoncrysol.2020.119945
337 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Woo Hyeong Sim, Seyun Kim, Weon Ho Shin, Hyung Mo Jeong Enhanced Energy-Transfer Properties in Core-Shell Photoluminescent Nanoparticles Using Mesoporous SiO2 Intermediate Layers Korean Journal of Metals and Materials 2020 58 2 137 10.3365/KJMM.2020.58.2.137
338 Jeong Hun Lee, Yoo Sei Park, Myeong Je Jang, Sung Min Park, Kyu Hwan Lee, Woo Sung Choi, Sung Mook Choi, Yang Do Kim MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution 2018 56 12 885 10.3365/KJMM.2018.56.12.885 Young-Sang Cho, Younghyun Lee, Nahee Ku, Sugueun Ji, Young Seok Kim Synthesis of Porous Particles by Electrospray-Assisted Self-Assembly for Water-Repellent or Photocatalytic Surfaces Korean Journal of Metals and Materials 2020 58 2 112 10.3365/KJMM.2020.58.2.112
339 Tae Wan Park, Hyunsung Jung, Young-Rae Cho, Jung Woo Lee, Woon Ik Park Pattern Formation of Highly Ordered Sub-20 nm Pt Cross-Bar on Ni Thin Film 2018 56 12 910 10.3365/KJMM.2018.56.12.910 Tae Wan Park, Woon Ik Park Pattern Transfer Printing by Controlling the Deposition Angle to Form Various Patterns Korean Journal of Metals and Materials 2020 58 2 145 10.3365/KJMM.2020.58.2.145
340 Woo Hyeon Jo, Dooho Choi Optimization of ZnO/Ag/ZnO Transparent Conductive Electrodes Fabricated by Magnetron Sputtering 2019 57 2 91 10.3365/KJMM.2019.57.2.91 Asdrubal A. Ramirez, Iván Gil, Gerardo Gordillo, Abderrazak M. Latifi Analysis of a plasma-assisted reactive evaporation process for preparation of ZnO thin films: Modeling and experimentation Thin Solid Films 2020 698 137846 10.1016/j.tsf.2020.137846
341 Sang Hee Lee, Doo Won Lee, Soo Hong Lee Review of Conductive Copper Paste for c-Si Solar Cells 2017 55 9 637 10.3365/KJMM.2017.55.9.637 Yi-Min Zhu, Jie Tang, Xin Jin, Ting-Rui Pan, Yu Chang, Zhen-Guo Yang Additive Preparation of Conductive Circuit Based on Template Transfer Process Using a Reusable Photoresist ACS Applied Materials & Interfaces 2020 12 6 7679 10.1021/acsami.9b17694
342 Su Mi Jo, Bong Sun You, Young Min Kim Comparative Study on the Texture Evolution and Formability of Warm-Rolled and Cold-Rolled AZ31 Magnesium Alloy Sheets 2018 56 10 734 10.3365/KJMM.2018.56.10.734 Boeun Choi, Wonsub Chung, Yonghwan Kim Corrosion Characteristics of Plasma Electrolytic Oxidation Treated AZ31 Magnesium Alloy with an Increase of the Coating Thickness Korean Journal of Metals and Materials 2020 58 2 87 10.3365/KJMM.2020.58.2.87
343 Inkang Heo, Donghyun Yoon, Sanghyun Hong, Jinyeol Kim, Jaehoon Kim, Sungho Chang, Siyeon Bae Microstructure Evaluation and Low Cycle Fatigue Damage due to Degradation of Ni-based Superalloy 2018 56 8 561 10.3365/KJMM.2018.56.8.561 Kyu-Sik Kim, Min-Chul Shim, Man-Ho Park, Jung-Yeul Yun, Kee-Ahn Lee Asymmetry in the Mechanical Properties of Block Ni-Cr-Al Superalloy Foam Fabricated by the Combination of Powder Alloying and Hot Rolling Processes Korean Journal of Metals and Materials 2020 58 2 103 10.3365/KJMM.2020.58.2.103
344 Ui Gyeong Hwang, Young Soo Lim Thermoelectric Transport Properties of Interface-Controlled n-type Bismuth Telluride Selenide Composites by Reduced Graphene Oxide 2019 57 9 603 10.3365/KJMM.2019.57.9.603 Peng-an Zong, Jia Liang, Peng Zhang, Chunlei Wan, Yifeng Wang, Kunihito Koumoto Graphene-Based Thermoelectrics ACS Applied Energy Materials 2020 3 3 2224 10.1021/acsaem.9b02187
345 Min Su Kim, Yeon Joo Kim, Yong Hwan Kim Effect of Alloying Concentration and Crystal Structure on an Anodic Oxide Layer Formed on Ti-Ni Alloy 2018 56 9 652 10.3365/KJMM.2018.56.9.652 Youngju Park, Hyejeong Ji, Chanyoung Jeong Development of Superhydrophilic 6061 Aluminum Alloy by Stepwise Anodization According to Pore-Widening Time Korean Journal of Metals and Materials 2020 58 2 97 10.3365/KJMM.2020.58.2.97
346 Han-Shin Cho, Sung-Soo Kim Microwave Absorbing Properties of Carbonyl Iron Particle Composites with Frequency Selective Surface 2019 57 11 741 10.3365/KJMM.2019.57.11.741 Yo-Han Ryu, Sung-Soo Kim Design and Fabrication of Metamaterial Absorbers Used for RF-ID Korean Journal of Metals and Materials 2020 58 2 131 10.3365/KJMM.2020.58.2.131
347 Daseul Ham, Won Jeong, Hyon Chol Kang Tin Microcrystals Synthesized by Thermal Chemical Vapor Deposition in a Hydrogen-Reducing Atmosphere 2019 57 6 390 10.3365/KJMM.2019.57.6.390 Biswaranjan Mohanty, Kunal Pal, Dilshad Quereshi, Suraj K. Nayak, Vuppaladadium Shanmuga Sharan Rathnam, Indranil Banerjee, Arfat Anis, Chandra Sekhar Barik, Preetam Sarkar, Susanta Kumar Rout Oleogels Based on Palmitic Acid and Safflower Oil: Novel Formulations for Ocular Drug Delivery of Voriconazole European Journal of Lipid Science and Technology 2020 122 4 1900288 10.1002/ejlt.201900288
348 Jae-Young Jung Effects of Homogenization Treatment, Mn/S ratio and δ -ferrite on the Hot Workability of Free-Machining 303-series Austenitic Stainless Steels 2017 55 12 880 10.3365/KJMM.2017.55.12.880 A.V. Ryabov Comparative Characteristics of Free-Machining Steels of Cr-Mo Type Solid State Phenomena 2020 299 670 10.4028/www.scientific.net/SSP.299.670
349 Jiajia Wu, Junmo Ahn, Jaeheon Lee Comparative Leaching Study on Conichalcite and Chalcopyrite Under Different Leaching Systems 2019 57 4 245 10.3365/KJMM.2019.57.4.245 Hasan Arslanoğlu, Ali Yaraş Chalcopyrite Leaching with Hydrogen Peroxide in Formic Acid Medium Transactions of the Indian Institute of Metals 2020 73 3 785 10.1007/s12666-020-01896-x
350 Ji-Sun Lee, MiJai Lee, Tae-Young Lim, Youngjin Lee, Dae-Woo Jeon, Soong-Keun Hyun, Jin-Ho Kim Physical Properties of AR-Glass Fibers in Continuous Fiber Spinning Conditions 2017 55 4 290 10.3365/KJMM.2017.55.4.290 Myounguk Kim, Hyunseok Ko, Taesang Kwon, Hwang-Cheol Bae, Cheol-Hoon Jang, Bi-Ung Heo, Sun-Min Park Development of novel refractory ceramic continuous fibers of fly ash and comparison of mechanical properties with those of E-glass fibers using the Weibull distribution Ceramics International 2020 46 9 13255 10.1016/j.ceramint.2020.02.102
351 Gi-Su Ham, Yeon-Ji Kang, Hyung-Jun Kim, Sang-Hoon Yoon, Kee-Ahn Lee Effect of Cr Electroplating Layer Thickness on the Tensile and High Cycle Fatigue Properties of AISI 1045 Steel 2019 57 3 138 10.3365/KJMM.2019.57.3.138 Young-Joon Kang, Ju-Hwan Baeg, Hyun Park, Young-Rae Cho Measurement of Intrinsic Hardness of Deposited Chromium Thin Films by Nanoindentation Method and Influencing Factors Korean Journal of Metals and Materials 2020 58 3 207 10.3365/KJMM.2020.58.3.207
352 Gyeong-Uk Kim, Jin Man Jang, Yong-Dae Kim, Jae-Chul Lee, Wonsik Lee Fabrication of Open-Pored Titanium Foam for Biomedical Implants 2019 57 10 679 10.3365/KJMM.2019.57.10.679 Hye-Jin Jeong, Viet Tien Luu, Yong-Ha Jeong, Sung-Tae Hong, Heung Nam Han A Study on Uniaxial Tensile Deformation Behavior of Superelastic Titanium Alloy Korean Journal of Metals and Materials 2020 58 3 162 10.3365/KJMM.2020.58.3.162
353 Myoung Youp Song, Eunho Choi, Young Jun Kwak Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling 2018 56 8 620 10.3365/KJMM.2018.56.8.620 Myoung Youp Song, Seong Ho Lee, Young Jun Kwak TiCl3 and Ni-added Mg prepared by reactive mechanical grinding processing and comparison with Fe2O3 and Niadded Mg Journal of Ceramic Processing Research 2019 20 2 173 10.36410/jcpr.2019.20.2.173
354 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Young-Joon Kang, Ju-Hwan Baeg, Hyun Park, Young-Rae Cho Measurement of Intrinsic Hardness of Deposited Chromium Thin Films by Nanoindentation Method and Influencing Factors Korean Journal of Metals and Materials 2020 58 3 207 10.3365/KJMM.2020.58.3.207
355 Han-Sang Kim, Sung-Jin Kim Influence of the Thickness of TiO2/TiO2-x Layers on the Behavior of a Memristor Device 2019 57 2 84 10.3365/KJMM.2019.57.2.84 Yu-Sung Kim, Jin-Young Choi, Yun-je park, Su-Hyeon Choe, Byung-Chul Cha, Young-Min Kong, Daeil Kim Electron Irradiation Effects on the Optical and Electrical Properties of ZnO/Ag/SnO2 Thin Films Korean Journal of Metals and Materials 2020 58 3 190 10.3365/KJMM.2020.58.3.190
356 Myoung Youp Song, Young Jun Kwak Hydrogen Storage Properties of Mg Alloy Prepared by Incorporating Polyvinylidene Fluoride via Reactive Milling 2018 56 12 878 10.3365/KJMM.2018.56.12.878 Myoung Youp Song, Seong Ho Lee, Young Jun Kwak TiCl3 and Ni-added Mg prepared by reactive mechanical grinding processing and comparison with Fe2O3 and Niadded Mg Journal of Ceramic Processing Research 2019 20 2 173 10.36410/jcpr.2019.20.2.173
357 Gyeong Yun Baek, Gwang Yong Shin, Ki Yong Lee, Do Sik Shim A Study on Micro-Structure and Wear Behavior of AISI M4 and CPM15V Deposited by Laser Melting 2018 56 6 430 10.3365/KJMM.2018.56.6.430 Sungwook Kim, Sunglock Lim, Chang-Keun Chun Repair Properties of Desulfurization Pump Part Layers by Direct Energy Deposited Additive Manufacturing Process Journal of Welding and Joining 2020 38 1 92 10.5781/JWJ.2020.38.1.10
358 Shi Yuke, Xiao Xiao, Seong Woong Kim, Jae Keun Hong, Junhee Hahn, Dong Bok Lee High-Temperature Corrosion of Ti-44Al-6Nb-2Cr-0.3Si-0.1C Alloy in 0.2%SO2/Ar Gas 2019 57 10 648 10.3365/KJMM.2019.57.10.648 Junhee Hahn, Sang Whan Park, Dong Bok Lee Long-time Oxidation of Ti3(Al,Si)C2 Carbides at 400-800 oC Korean Journal of Metals and Materials 2020 58 3 182 10.3365/KJMM.2020.58.3.182
359 Cheol-Woo Kim, Young-Chan Kim, Jung-Han Kim, Jae-Ik Cho, Min-Suk Oh Effect of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting 2018 56 11 805 10.3365/KJMM.2018.56.11.805 Cheng Wen, Junqi Gan, Chengbo Li, Yujian Huang, Jun Du Comparative Study on Relationship Between Modification of Si Phase and Thermal Conductivity of Al–7Si Alloy Modified by Sr/RE/B/Sb Elements International Journal of Metalcasting 2021 15 1 194 10.1007/s40962-020-00436-z
360 Myoung Youp Song, Young Jun Kwak, Eunho Choi Hydrogen Storage Properties of Mg-Graphene Composites 2018 56 7 524 10.3365/KJMM.2018.56.7.524 Myoung Youp Song, Seong Ho Lee, Young Jun Kwak TiCl3 and Ni-added Mg prepared by reactive mechanical grinding processing and comparison with Fe2O3 and Niadded Mg Journal of Ceramic Processing Research 2019 20 2 173 10.36410/jcpr.2019.20.2.173
361 Jong-hyoung Kim, Jinwoo Lee, Woojoo Kim, Jongheon Kim, Seung-Kyun Kang, Dongil Kwon Characterization of Viscoelastic Behavior of Poly(dimethylsiloxane) by Nanoindentation 2019 57 5 289 10.3365/KJMM.2019.57.5.289 Young-Joon Kang, Ju-Hwan Baeg, Hyun Park, Young-Rae Cho Measurement of Intrinsic Hardness of Deposited Chromium Thin Films by Nanoindentation Method and Influencing Factors Korean Journal of Metals and Materials 2020 58 3 207 10.3365/KJMM.2020.58.3.207
362 Myoung Youp Song, Young Jun Kwak Hydrogen Uptake and Release Characteristics of Mg-xTaF5-xVCl3 (x=1.25, 2.5, and 5) 2018 56 8 611 10.3365/KJMM.2018.56.8.611 Myoung Youp Song, Seong Ho Lee, Young Jun Kwak TiCl3 and Ni-added Mg prepared by reactive mechanical grinding processing and comparison with Fe2O3 and Niadded Mg Journal of Ceramic Processing Research 2019 20 2 173 10.36410/jcpr.2019.20.2.173
363 Jun Yeong Ko, Jae Sook Song, Sun Ig Hong Effect of Carbon Addition and Recrystallization on the Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys 2018 56 1 26 10.3365/KJMM.2018.56.1.26 Yong Keun Kim, Byung Ju Lee, Soon-Ku Hong, Sun Ig Hong Strengthening and fracture of deformation-processed dual fcc-phase CoCrFeCuNi and CoCrFeCu1.71Ni high entropy alloys Materials Science and Engineering: A 2020 781 139241 10.1016/j.msea.2020.139241
364 So-Yeong Lee, Sung-Hun Park, Ho-Sang Sohn Removal of Iron from Ilmenite Through Selective Chlorination Using Coke and Cl2 Gas 2019 57 3 146 10.3365/KJMM.2019.57.3.146 Hyeong Hun Ahn, Man Seung Lee Solvent Extraction of Ti(IV) from Hydrochloric Acid Leaching Solution of Ilmenite Mineral Processing and Extractive Metallurgy Revie 2020 1 10.1080/08827508.2020.1740217
365 Byung Hak Choe, Hyeon Su Jang, Bum Kyu Lee, Ka Ram Lim, Young Sang Na, Yong Taek Hyun, Seung Eon Kim, Young Uk Kim, Chan Sung Park Metastable Phase Transformation of Beta Titanium Alloys by Slip Mechanism 2017 55 7 453 10.3365/KJMM.2017.55.7.453 Hye-Jin Jeong, Viet Tien Luu, Yong-Ha Jeong, Sung-Tae Hong, Heung Nam Han A Study on Uniaxial Tensile Deformation Behavior of Superelastic Titanium Alloy Korean Journal of Metals and Materials 2020 58 3 162 10.3365/KJMM.2020.58.3.162
366 Hyun Park, Sang-Hyeok Kim, Se-Jong Kim, Hyo-Jong Lee Effect of Shear Deformation During Drawing on Inhomogeneous Microstructures and Textures in High Purity Copper Wires After Annealing 2018 56 12 861 10.3365/KJMM.2018.56.12.861 Hyun Park, Sang-Hyeok Kim, Woo-Jin Lee, Jung-Won Ha, Se-Jong Kim, Hyo-Jong Lee Effect of Wire-Drawing Process Conditions on Secondary Recrystallization Behavior During Annealing in High-Purity Copper Wires Metals and Materials International 2020 10.1007/s12540-020-00682-0
367 Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars 2016 54 12 862 10.3365/KJMM.2016.54.12.862 Sally Hosny, Mohamed A.-H. Gepreel, Mona G. Ibrahim, Ahmed R. Bassuony Simulation of Tempcore Process for 500 MPa Steel Bars Metals and Materials International 2020 10.1007/s12540-020-00685-x
368 Kwangsu Choi, Youngbuem Song, Seonghoon Yi, Joon Sik Park Oxidation Behaviors of Alloys Containing β/B2 Phases of Ti-45Al-Mo-Nb Alloys and Evaluation of the Oxidation Behaviors of Si Pack Cementation Coated Alloys 2019 57 3 131 10.3365/KJMM.2019.57.3.131 Sinan Aksöz, Yavuz Kaplan Formation of Ti-Aluminides on Commercially Pure Ti via the Hot-Dipping Aluminizing Process Transactions of the Indian Institute of Metals 2020 73 4 1065 10.1007/s12666-020-01948-2
369 Woo-Jin Cho, In-Jin Shon Effect of BN Addition on the Mechanical Properties of TiN-BN Composites 2018 56 9 658 10.3365/KJMM.2018.56.9.658 Junhee Hahn, Muhammad Ali Abro, Xiao Xiao, Dong Bok Lee Corrosion of Multilayered TiAlSiN Films at 800–1000 °C in N2/0.1%H2S Gas Metals and Materials International 2020 10.1007/s12540-020-00665-1
370 Jikwang Chae, Jung-Min Oh, Suhwan Yoo, Jae-Won Lim Eco-Friendly Pretreatment of Titanium Turning Scraps and Subsequent Preparation of Ferro-Titanium Ingots 2019 57 9 569 10.3365/KJMM.2019.57.9.569 Handong Jiao, Wei-Li Song, Haosen Chen, Mingyong Wang, Shuqiang Jiao, Daining Fang Sustainable recycling of titanium scraps and purity titanium production via molten salt electrolysis Journal of Cleaner Production 2020 261 121314 10.1016/j.jclepro.2020.121314
371 Jong-hyoung Kim, Jinwoo Lee, Woojoo Kim, Jongheon Kim, Seung-Kyun Kang, Dongil Kwon Characterization of Viscoelastic Behavior of Poly(dimethylsiloxane) by Nanoindentation 2019 57 5 289 10.3365/KJMM.2019.57.5.289 Rafał Januszewski, Michał Dutkiewicz, Marek Nowicki, Ireneusz Kownacki Synthesis and properties of hybrid materials obtained via additive cross-linking of liquid polybutadiene rubber with H-Si containing reagents Polymer Testing 2020 87 106516 10.1016/j.polymertesting.2020.106516
372 Cheol-Woo Kim, Young-Chan Kim, Jung-Han Kim, Jae-Ik Cho, Min-Suk Oh Effect of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting 2018 56 11 805 10.3365/KJMM.2018.56.11.805 Jae-Cheol Jang, Kwang Seon Shin Effects of Ni and Cu Addition on Tensile Properties and Thermal Conductivity of High Pressure Die-cast Al-6Si Alloys Korean Journal of Metals and Materials 2020 58 4 217 10.3365/KJMM.2020.58.4.217
373 Wook Jin Oh, Yong Son, Do Sik Shim Effect of In-Situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition 2019 57 8 543 10.3365/KJMM.2019.57.8.543 Jin-Myeong Lee, Jung-Eum Lee, Ji-Hoon Kim, Sang-Woo Kim Compressive Behavior of 316L Stainless Steel Lattice Structures Fabricated by Selective Laser Melting Korean Journal of Metals and Materials 2020 58 4 227 10.3365/KJMM.2020.58.4.227
374 Young Bok Ryu, Man Sig Lee Infrared Spectra and Thermal Properties of Sodium Silicate Solutions 2018 56 1 72 10.3365/KJMM.2018.56.1.72 Seongeun Pyeon, Man Sig Lee, Dae-Won Park, Jae Ho Baek Effects of Jetting Parameters and Sodium Silicate-Based Binder on Droplet Formation Korean Journal of Metals and Materials 2020 58 4 278 10.3365/KJMM.2020.58.4.278
375 Eun-Joon Chun, Changkyoo Park, Wonah Park Study on the Selective Surface Modification of Injection Mold Steels by Laser Materials Processing: Relationship Between AlN Formation and Surface Hardening During Laser Nitriding 2020 58 1 32 10.3365/KJMM.2020.58.1.32 Eun-Joon Chun Nanostructuring Behavior of NiCrBSi and CoCrWC Thermal Spray Coatings Formed by Temperature-Controlled Laser Heat Treatment Korean Journal of Metals and Materials 2020 58 4 247 10.3365/KJMM.2020.58.4.247
376 Xuan-Khoa Huynh, Sun-Woo Bae, Ji Soon Kim in situ Fabrication of Fe-TiB2 Nanocomposite Powder by Planetary Ball Milling and Subsequent Heat-treatment of FeB and TiH2 Powder Mixture 2017 55 1 10 10.3365/KJMM.2017.55.1.10 Hak-Rae Cho, Ji-Soon Kim, Koo-Hyun Chung Assessment of Wear Characteristics of Fe-TiB2 Sintered from Nanocomposite Mixtures Journal of the Korean Society for Precision Engine 2018 35 10 1001 10.7736/KSPE.2018.35.10.1001
377 Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process 2019 57 4 227 10.3365/KJMM.2019.57.4.227 Seongeun Pyeon, Man Sig Lee, Dae-Won Park, Jae Ho Baek Effects of Jetting Parameters and Sodium Silicate-Based Binder on Droplet Formation Korean Journal of Metals and Materials 2020 58 4 278 10.3365/KJMM.2020.58.4.278
378 Seong-Hyeon Hong, Myoung Youp Song Hydrogen Absorption and Release Properties of MgH2, Mg2Ni, and Ni-Added Mg via Reactive Mechanical Grinding 2018 56 2 155 10.3365/KJMM.2018.56.2.155 Myoung Youp Song, Seong Ho Lee, Young Jun Kwak TiCl3 and Ni-added Mg prepared by reactive mechanical grinding processing and comparison with Fe2O3 and Niadded Mg Journal of Ceramic Processing Research 2019 20 2 173 10.36410/jcpr.2019.20.2.173
379 Seung-Hwan Jeon, Yaejin Hong, Hyukhyun Ryu, Won-Jae Lee Photoelectrochemical Properties of Copper Oxide Photoelectrode with Various Copper Oxide Buffer Layers 2019 57 7 447 10.3365/KJMM.2019.57.7.447 Yaejin Hong, Seung-Hwan Jeon, Hyukhyun Ryu, Won-Jae Lee Effects of Growth Temperature on the Physicochemical and Photoelectrochemical Properties of a Modified Chemical Bath Deposited Fe2O3 Photoelectrode Korean Journal of Metals and Materials 2020 58 4 263 10.3365/KJMM.2020.58.4.263
380 Wook Jin Oh, Yong Son, Do Sik Shim Effect of In-Situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition 2019 57 8 543 10.3365/KJMM.2019.57.8.543 Wook-Jin Oh, Gwang-Yong Shin, Yong Son, Do-Sik Shim Effect of Repair Width on Mechanical Properties of 630 Stainless Steel Repaired by Direct Energy Deposition Process The Korean Society of Manufacturing Process Engine 2020 19 3 42 10.14775/ksmpe.2020.19.03.042
381 Jongho Shin, Changhoon Sung, Suncheol Kwon, Sukhwan Kwon, Byungmoon Chang, Jehyun Lee Prediction of Primary Dendrite Arm Spacing with Solidification Velocity and Temperature Gradient during Directional Solidification in CMSX-4 Superalloy 2018 56 9 674 10.3365/KJMM.2018.56.9.674 Junhee Hahn, Xiao Xiao, Dong Bok Lee Oxidation of Ni-Cr-Co-Al-Mo-Ti-Re-Ta-W-Ru Single Crystals at 1000 oC in Air Korean Journal of Metals and Materials 2020 58 4 234 10.3365/KJMM.2020.58.4.234
382 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Da Hye Song, Yeong Gyeom Kim, Jin Kyu Lee Effect of Milling Time on the Microstructure and Mechanical Properties of Ta20Nb20V20W20Ti20 High Entropy Alloy Journal of Korean Powder Metallurgy Institute 2020 27 1 52 10.4150/KPMI.2020.27.1.52
383 Sung-Gyu Kwak, Go-Eun Lee, Il-Ho Kim Electronic Transport and Thermoelectric Properties of Cu12-xZnxSb4S13 Tetrahedrites Prepared by Mechanical Alloying and Hot Pressing 2019 57 5 328 10.3365/KJMM.2019.57.5.328 Sung-Gyu Kwak, Ji-Hee Pi, Go-Eun Lee, Il-Ho Kim Solid-State Synthesis and Thermoelectric Properties of Tetrahedrites Cu12Sb4-yBiyS13 Korean Journal of Metals and Materials 2020 58 4 272 10.3365/KJMM.2020.58.4.272
384 Yu-Sung Kim, Jin-Young Choi, Yun-Je Park, Su-Hyeon Choe, Young-Min Kong, Daeil Kim Influence of Film Thickness on the Electrical and Optical Properties of ZnO/Ag/SnO2 Tri-Layer Films 2019 57 5 324 10.3365/KJMM.2019.57.5.324 Gang Bae Kim, June Won Hyun Effect of Sintering Temperature on the Characteristics of Zn0.99Li0.01O Thin Film on Si Substrate Korean Journal of Metals and Materials 2020 58 4 257 10.3365/KJMM.2020.58.4.257
385 Young-Jun Song Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process 2018 56 10 755 10.3365/KJMM.2018.56.10.755 Mariam A. Pogosova, Irina V. Krasnikova, Alexey O. Sanin, Svetlana A. Lipovskikh, Andrei A. Eliseev, Artem V. Sergeev, Keith J. Stevenson Complex Investigation of Water Impact on Li-Ion Conductivity of Li1.3Al0.3Ti1.7(PO4)3—Electrochemical, Chemical, Structural, and Morphological Aspects Chemistry of Materials 2020 32 9 3723 10.1021/acs.chemmater.9b04419
386 Seung-Yong Lee, Sang-In Lee, Byoungchul Hwang Sensitivity of Microstructural Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis 2016 54 9 637 10.3365/KJMM.2016.54.9.637 Young-Chul Yoon, Sang-In Lee, Byoungchul Hwang Effect of Heat Treatment on Microstructure and Mechanical Properties of an Fe-6.5Mn-0.08C Medium-Manganese Steel Korean Journal of Materials Research 2020 30 1 8 10.3740/MRSK.2020.30.1.8
387 Jun Yeong Ko, Jae Sook Song, Sun Ig Hong Effect of Carbon Addition and Recrystallization on the Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys 2018 56 1 26 10.3365/KJMM.2018.56.1.26 Dennis Edgard Jodi, Nuri Choi, Joohyun Park, Nokeun Park Mechanical Performance Improvement by Nitrogen Addition in N-CoCrNi Compositionally Complex Alloys Metallurgical and Materials Transactions A 2020 51 6 3228 10.1007/s11661-020-05738-9
388 Tae-Hoon Kang, Kyu-Sik Kim, Soon-Hong Park, Kee-Ahn Lee Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process 2018 56 6 423 10.3365/KJMM.2018.56.6.423 Eun-Joon Chun Nanostructuring Behavior of NiCrBSi and CoCrWC Thermal Spray Coatings Formed by Temperature-Controlled Laser Heat Treatment Korean Journal of Metals and Materials 2020 58 4 247 10.3365/KJMM.2020.58.4.247
389 Sang-In Lee, Seung-Wan Lee, Seok Gyu Lee, Sunghak Lee, Hwan Gyo Jung, Byoungchul Hwang Correlation of Microstructural Factors with the Yield Ratio and Uniform Elongation in API X80 Linepipe Steels 2018 56 6 413 10.3365/KJMM.2018.56.6.413 Tae-Woon Hong, Byoungchul Hwang Microstructure and Mechanical Properties of 600 MPa-Grade Seismic Resistant Reinforced Steel Bars Fabricated by a Pilot Plant Korean Journal of Materials Research 2019 29 6 349 10.3740/MRSK.2019.29.6.349
390 Cheol Woo Park, Jun Hyeong In, Jae Hwa Park, Kwang Bo Shim, Jeong Ho Ryu Up- and Downconversion Luminescence in Ho3+,Yb3+-Co-Doped Y2O3 Transparent Ceramics Prepared by Spark Plasma Sintering 2019 57 9 609 10.3365/KJMM.2019.57.9.609 Kaijie Ning, Jun Wang, Jie Ma, Zhili Dong, Ling Bing Kong, Dingyuan Tang Fabrication of laser grade Yb: Y2O3 transparent ceramics with ZrO2 additive through hot isostatic pressing Materials Today Communications 2020 24 101185 10.1016/j.mtcomm.2020.101185
391 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Thanh Tuan Tran, Man Seung Lee Separation of Mo(VI), V(V), Ni(II), Al(III) from synthetic hydrochloric acidic leaching solution of spent catalysts by solvent extraction with ionic liquid Separation and Purification Technology 2020 247 117005 10.1016/j.seppur.2020.117005
392 Kwang-Jin Bae, Wenhui Yao, Yiliang He, Young-Rae Cho Wetting Behavior of Liquids on Micro-Patterned Polymer Surfaces Fabricated by Thermal Imprinting 2017 55 9 624 10.3365/KJMM.2017.55.9.624 Mohan Kumar K, V Velmurugan Wetting behavior of textured silicon surfaces- an experimental study Materials Research Express 2020 7 5 054001 10.1088/2053-1591/ab8cf7
393 Seung-Yong Lee, Sang-In Lee, Byoungchul Hwang Sensitivity of Microstructural Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis 2016 54 9 637 10.3365/KJMM.2016.54.9.637 Tae-Woon Hong, Byoungchul Hwang Microstructure and Mechanical Properties of 600 MPa-Grade Seismic Resistant Reinforced Steel Bars Fabricated by a Pilot Plant Korean Journal of Materials Research 2019 29 6 349 10.3740/MRSK.2019.29.6.349
394 Kunok Chang, Junhyun Kwon, Gyeong-Geun Lee Phase-field Modeling of Precipitate Behavior in RPV Steel Using CALPHAD Database 2018 56 6 472 10.3365/KJMM.2018.56.6.472 Yuanyang Sun, Yuhong Zhao, Baojun Zhao, Zhen Guo, Xiaolin Tian, Wenkui Yang, Hua Hou Multi-component phase-field simulation of microstructural evolution and elemental distribution in Fe–Cu–Mn–Ni–Al alloy Calphad 2020 69 101759 10.1016/j.calphad.2020.101759
395 Gunchoo Shim Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review 2017 55 5 296 10.3365/KJMM.2017.55.5.296 WeiZhan Wang, ShunShan Feng, ZhongMing Li, ZhiGang Chen, TaiYong Zhao Microstructure and properties of micro-arc oxidation ceramic films on AerMet100 steel Journal of Materials Research and Technology 2020 9 3 6014 10.1016/j.jmrt.2020.04.005
396 Junyeong Jeong, Sang-Cheon Park, Ga-Young Shin, Chang Wook Lee, Tae-Jeong Kim, Min-Su Choi Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel 2018 56 11 787 10.3365/KJMM.2018.56.11.787 Ae-Ryeong Park, Jae-Hoon Nam, Minjeong Kim, In-Seok Jang, Young-Kook Lee Evaluations of tensile properties as a function of austenitizing temperature and springback by V-bending testing in medium-Mn steels Materials Science and Engineering: A 2020 787 139534 10.1016/j.msea.2020.139534
397 Youngju Kim, Jongyul Kim, Daniel Seth Hussey, Oh Youl Kwon, Seung Wook Lee Visualization of Magnetic Domains in Electrical Steel Using High-Resolution Dark-Field Imaging 2019 57 6 352 10.3365/KJMM.2019.57.6.352 Jacopo Valsecchi, Jonathan S. White, Marek Bartkowiak, Wolfgang Treimer, Youngju Kim, Seung Wook Lee, Denis M. Gokhfeld, Ralph P. Harti, Manuel Morgano, Markus Strobl, Christian Grünzweig Visualization of compensating currents in type-II/1 superconductor via high field cooling Applied Physics Letters 2020 116 19 192602 10.1063/5.0004438
398 Young Hyun Oh, Hyun Jung Ryu, Taejung Kim, Minsu Choi, Taeseon Lee Mechanical Performance and Microstructure of Resistance Element Welds of Dissimilar Metals Created with a Headless Rivet 2019 57 11 708 10.3365/KJMM.2019.57.11.708 Taeseon Lee Resistance spot weldability of heat-treatable and non-heat-treatable dissimilar aluminium alloys Science and Technology of Welding and Joining 2020 25 7 543 10.1080/13621718.2020.1761619
399 Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process 2019 57 4 227 10.3365/KJMM.2019.57.4.227 Amir Mostafaei, Amy M. Elliott, John E. Barnes, Corson L. Cramer, Peeyush Nandwana, Markus Chmielus WITHDRAWN: Binder jet 3D printing – Process parameters, materials, properties, and challenges Progress in Materials Science 2020 100684 10.1016/j.pmatsci.2020.100684
400 Jikwang Chae, Jung-Min Oh, Suhwan Yoo, Jae-Won Lim Eco-Friendly Pretreatment of Titanium Turning Scraps and Subsequent Preparation of Ferro-Titanium Ingots 2019 57 9 569 10.3365/KJMM.2019.57.9.569 V. Janakiram, K. Jayasankar, T. Dhani Babu, N. R. M. R. Bhargava, P. S. Mukherjee An Innovative Approach of Recycling Aluminium Scrap for Ferrotitanium Production Journal of The Institution of Engineers (India): S 2020 101 1 7 10.1007/s40033-020-00218-1
401 Yeon kwan Kang, Yinsheng He, Han-Sang Lee, Beom-Soo Kim, Liming Xu, Keesam Shin Demonstration Testing of Boiler Tubes in a Clean Power Test-Bed Plant 2019 57 12 817 10.3365/KJMM.2019.57.12.817 Dong-Ju Chu, Han-Yeol Kim, Joonho Lee, Woo-Sang Jung Investigation of precipitation sequence during creep in 2.25Cr-1Mo steel Materials Characterization 2020 164 110328 10.1016/j.matchar.2020.110328
402 Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel 2019 57 8 491 10.3365/KJMM.2019.57.8.491 Junghoon Lee, Hanji Park, Myeonghyun Kim, Han-Jin Kim, Jin-yoo Suh, Namhyun Kang Role of Hydrogen and Temperature in Hydrogen Embrittlement of Equimolar CoCrFeMnNi High-entropy Alloy Metals and Materials International 2021 27 1 166 10.1007/s12540-020-00752-3
403 Myoung Youp Song, Eunho Choi, Young Jun Kwak Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling 2018 56 8 620 10.3365/KJMM.2018.56.8.620 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the dehydrogenation rates and hydrogen-storage capacity of Mg-graphene composites by adding nickel via reactive ball milling Materials Research Bulletin 2020 130 110938 10.1016/j.materresbull.2020.110938
404 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 2019 57 3 176 10.3365/KJMM.2019.57.3.176 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the dehydrogenation rates and hydrogen-storage capacity of Mg-graphene composites by adding nickel via reactive ball milling Materials Research Bulletin 2020 130 110938 10.1016/j.materresbull.2020.110938
405 In-Jin Shon Effects of Direct Current on the Wetting between Molten Al and a Graphite Substrate 2018 56 7 505 10.3365/KJMM.2018.56.7.505 Kirsten Bobzin, Wolfgang Wietheger, Julian Hebing, Lidong Zhao, Alexander Schmidt, Riza Iskandar, Joachim Mayer Influence of direct electric current on wetting behavior during brazing Frontiers of Mechanical Engineering 2020 15 3 496 10.1007/s11465-019-0582-6
406 Woo-Jin Jung, Hyeok-Jin Kim, Il-Ho Kim Charge Transport and Thermoelectric Properties of N-type Bi2-xSbxTe3-ySey:Im Prepared by Encapsulated Melting and Hot Pressing 2018 56 7 544 10.3365/KJMM.2018.56.7.544 M. S. Shalaby, H. M. Hashem, N. M. Yousif, H. A. Zayed, A. Sotelo, L. A. Wahab Preparation, structural characteristics and optical parameters of the synthesized nano-crystalline sulphur-doped Bi2Te2.85Se0.15 thermoelectric materials Journal of Materials Science: Materials in Electro 2020 31 13 10612 10.1007/s10854-020-03611-4
407 Min Jung Kim, Sang-Hwan Bak, Junhee Hahn, Seon Jin Kim, Dong Bok Lee High-Temperature Oxidation of Fe-12Cr-0.3C-4Mn-(13-15)Cu Composite Alloys 2019 57 9 575 10.3365/KJMM.2019.57.9.575 Maya Putri Agustianingrum, Unhae Lee, Nokeun Park High-temperature oxidation behaviour of CoCrNi medium-entropy alloy Corrosion Science 2020 173 108755 10.1016/j.corsci.2020.108755
408 Eun Hye Hwang, Hwan Goo Seong, Sung Jin Kim Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications 2018 56 8 570 10.3365/KJMM.2018.56.8.570 Jin Sung Park, Hwang Goo Seong, Joongki Hwang, Sung Jin Kim Adverse effects of Ni on the mechanical and corrosion-induced hydrogen embrittlement properties of ultra-strong giga steel used for automotive applications Materials & Design 2020 193 108877 10.1016/j.matdes.2020.108877
409 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Thanh Tuan Tran, Man Seung Lee Interactions Between Ionic Liquid (ALiCY) and TBP and their Use in Hydrometallurgy for Extracting Co(II) and Ni(II) Korean Journal of Metals and Materials 2020 58 6 423 10.3365/KJMM.2020.58.6.423
410 Hyun Jun Cho, Hyun-Sik Kim, Sang-Il Kim Effect of Cu/In Doping on the Thermoelectric Transport Properties of Bi-Sb-Te Alloys 2019 57 10 673 10.3365/KJMM.2019.57.10.673 Hyun-Jun Cho, Hyun-Sik Kim, Woong-hee Sohn, Sang-il Kim Influence of Cu Doping on Bipolar Conduction Suppression for p-type Bi0.5Sb1.5Te3 and Bi0.4Sb1.6Te3 Alloys Korean Journal of Metals and Materials 2020 58 6 439 10.3365/KJMM.2020.58.6.439
411 Sang-Jun Jeong, In-Kyu Hwang, In-Sung Cho, Hee-Soo Kim Estimation of Chemical Composition of Al-Si Cast Alloys Using Image Recognition 2019 57 3 184 10.3365/KJMM.2019.57.3.184 Jinyeong Yu, Myoungjae Lee, Young Hoon Moon, Yoojeong Noh, Taekyung Lee Prediction of Electropulse-Induced Nonlinear Temperature Variation of Mg Alloy Based on Machine Learning Korean Journal of Metals and Materials 2020 58 6 413 10.3365/KJMM.2020.58.6.413
412 Changsoo Lee, Kihoon Bang, Doosun Hong, Hyuck Mo Lee Recent Progress in First Principle Calculation and High-Throughput Screening of Electrocatalysts: A Review 2019 57 1 1 10.3365/KJMM.2019.57.1.1 Thanh Tuan Tran, Man Seung Lee Interactions Between Ionic Liquid (ALiCY) and TBP and their Use in Hydrometallurgy for Extracting Co(II) and Ni(II) Korean Journal of Metals and Materials 2020 58 6 423 10.3365/KJMM.2020.58.6.423
413 Thanh Tuan Tran, Mudassir Iqbal, Man Seung Lee Comparison of the Extraction and Stripping Behavior of Iron (III) from Weak Acidic Solution Between Ionic Liquids and Commercial Extractants 2019 57 12 787 10.3365/KJMM.2019.57.12.787 Thanh Tuan Tran, Man Seung Lee Interactions Between Ionic Liquid (ALiCY) and TBP and their Use in Hydrometallurgy for Extracting Co(II) and Ni(II) Korean Journal of Metals and Materials 2020 58 6 423 10.3365/KJMM.2020.58.6.423
414 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling 2019 57 10 663 10.3365/KJMM.2019.57.10.663 Myoung Youp Song, Eunho Choi, Young Jun Kwak Increase in the dehydrogenation rates and hydrogen-storage capacity of Mg-graphene composites by adding nickel via reactive ball milling Materials Research Bulletin 2020 130 110938 10.1016/j.materresbull.2020.110938
415 Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process 2019 57 4 227 10.3365/KJMM.2019.57.4.227 Amir Mostafaei, Amy M. Elliott, John E. Barnes, Fangzhou Li, Wenda Tan, Corson L. Cramer, Peeyush Nandwana, Markus Chmielus Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges Progress in Materials Science 2020 100707 10.1016/j.pmatsci.2020.100707
416 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Laleh Rezazadeh, Shahriar Sharafi, Mahin Schaffie, Mohammad Ranjbar Application of oxidation-reduction potential (ORP) as a controlling parameter during the synthesis of Fe3O4@PVA nanocomposites from industrial waste (raffinate) Environmental Science and Pollution Research 2020 27 25 32088 10.1007/s11356-020-09436-2
417 Hyun Hwa Park, Jun Yun Kang, Heon-Young Ha, Tae-Ho Lee, Hyun Uk Hong Acceleration of Nano-Sized NbC Precipitation and Improvement of Creep Resistance in Alumina-Forming Austenitic Stainless Steel via Cold Working 2017 55 7 470 10.3365/KJMM.2017.55.7.470 Hongyuan Wen, Bingbing Zhao, Xianping Dong, Feng Sun, Lanting Zhang A Systematic Investigation of Precipitates in Matrix and at Grain Boundaries in an Alumina-Forming Austenitic Steel During Creep Testing at 700 °C Metallurgical and Materials Transactions A 2020 51 8 4186 10.1007/s11661-020-05848-4
418 Hye Ryoung Park, Young Jun Kwak, Myoung Youp Song Increase in the Hydrogen-Sorption Rates and the Hydrogen-Storage Capacity of MgH2 by Adding a Small Proportion of Zn(BH4)2 2017 55 9 657 10.3365/KJMM.2017.55.9.657 Myoung Youp Song, Seong Ho Lee, Young Jun Kwak TiCl3 and Ni-added Mg prepared by reactive mechanical grinding processing and comparison with Fe2O3 and Niadded Mg Journal of Ceramic Processing Research 2019 20 2 173 10.36410/jcpr.2019.20.2.173
419 Sung Min Park, Myeong Je Jang, Yoo Sei Park, Jooyoung Lee, Jae-yeop Jeong, Jaehoon Jung, Min-Kwan Choi, Yu-Seong Noh, Min-Ho Seo, Hyung Ju Kim, Juchan Yang, Yang Do Kim, Sung Mook Choi Synthesis and Characterization of the Cu0.72Co2.28O4 Catalyst for Oxygen Evolution Reaction in an Anion Exchange Membrane Water Electrolyzer 2020 58 1 49 10.3365/KJMM.2020.58.1.49 Yoo Sei Park, Juchan Yang, Jongmin Lee, Myeong Je Jang, Jaehoon Jeong, Woo-Sung Choi, Yangdo Kim, Yadong Yin, Min Ho Seo, Zhongwei Chen, Sung Mook Choi Superior performance of anion exchange membrane water electrolyzer: Ensemble of producing oxygen vacancies and controlling mass transfer resistance Applied Catalysis B: Environmental 2020 278 119276 10.1016/j.apcatb.2020.119276
420 Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel 2018 56 5 375 10.3365/KJMM.2018.56.5.375 Yookyung Kim, Byungrok Moon, Namhyun Kang, Eun-Joon Chun Effect of Cladding Conditions on Solidification Cracking Behavior during Dissimilar Cladding of Inconel Alloy FM 52 and 308L Stainless Steel to Carbon Steel: Evaluation of Solidification Brittle Temperature Range by Transverse−Varestraint Test Korean Journal of Metals and Materials 2020 58 6 403 10.3365/KJMM.2020.58.6.403
421 Do-Hoon Kim, You-Hwan Lee, Jeoung Han Kim Effect of Second Aging Treatment on the Microstructure and Mechanical Properties of SUH660 Alloy 2016 54 10 716 10.3365/KJMM.2016.54.10.716 Muhammad Samiuddin, Jing-long Li, Muhammad Taimoor, Mohammad Nouman Siddiqui, Sumair Uddin Siddiqui, Jiang-tao Xiong Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization Defence Technology 2020 10.1016/j.dt.2020.06.012
422 Woojin An, Dohee Kim, Bong-Hwan Kim, Shae Kwang Kim, Sangshik Kim, Hyokyung Sung Effects of Exposure Temperature on Tensile and Charpy Impact Properties of the 7xxx Aluminum Alloy for Aerospace Applications 2019 57 4 214 10.3365/KJMM.2019.57.4.214 Bong Hwan Kim, Majid Seyed-Salehi, Shae Kwang Kim, Mohammad Sadegh Mohebbi, Ghasem Eisaabadi Bozchaloei Microstructural evolutions of newly developed ECO-7175 aluminum alloy during hot compression: The effect of Cr elimination Materials Science and Engineering: A 2020 792 139830 10.1016/j.msea.2020.139830
423 Hyeon-Woo Yang, Jung-Ho Lee, Sang-Chul Jung, Seung-Taek Myung, Woo-Seung Kang, Sun-Jae Kim Fabrication of Si/SiOx Anode Materials by a Solution Reaction-Based Method for Lithium Ion Batteries 2016 54 10 780 10.3365/KJMM.2016.54.10.780 Yeonchul Cho, Kihun Kim, Jaewoo Ahn, Jaeheon Lee Application of Multistage Concentration (MSC) Electrodialysis to Concentrate Lithium from Lithium-Containing Waste Solution Metals 2020 10 7 851 10.3390/met10070851
424 Sanghoo Park, Sumin Kim, Daeun Lee, Soojin Ahn, Sangshik Kim Effect of Microstructural Factors on Fatigue and Fatigue Crack Propagation Behaviors of Mill-Annealed Ti-6Al-4V Alloy 2018 56 12 845 10.3365/KJMM.2018.56.12.845 Janu Ageng Nugroho, Ghozali Suprobo, Nokeun Park, Eung Ryul Baek Investigation of Dynamic Recrystallization Phenomenon in Drawn Ti-6Al-4V Alloy Materials Science Forum 2020 1000 419 10.4028/www.scientific.net/MSF.1000.419
425 Jueun Lee, Hongil So, Yeonchul Cho, Inhwan Jang, Jaewoo Ahn, Jaeheon Lee A Study on the Separation and Concentration of Li from Li-Containing Waste Solutions by Electrodialysis 2019 57 10 656 10.3365/KJMM.2019.57.10.656 Yeonchul Cho, Kihun Kim, Jaewoo Ahn, Jaeheon Lee Application of Multistage Concentration (MSC) Electrodialysis to Concentrate Lithium from Lithium-Containing Waste Solution Metals 2020 10 7 851 10.3390/met10070851
426 Moon-Hi Hong, Deok-Gu Kang, Doo-Jin Paik, Hyeon-Seok Hwang, Sung-ho Park Effect of Added Magneisum on the Coating Properties of Galvanized Steel Sheets 2016 54 10 723 10.3365/KJMM.2016.54.10.723 Hyeryeong Jeong, Jin Young Choi, Jihyun Lee, Jaesoo Lim, Kongtae Ra Heavy metal pollution by road-deposited sediments and its contribution to total suspended solids in rainfall runoff from intensive industrial areas Environmental Pollution 2020 265 115028 10.1016/j.envpol.2020.115028
427 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Thi Thuy Nhi Nguyen, Viet Nhan Hoa Nguyen, Yang Liu, Man Seung Lee Analysis of the interaction in the mixture of organophosphorus acids and Aliquat 336 through the measurement of dielectric constant and viscosity Journal of Molecular Liquids 2020 315 113738 10.1016/j.molliq.2020.113738
428 Jinyeon Kim, Hyun Seok Oh, Jinwoo Kim, Eun Soo Park Development of Rare-Earth Element Based High Entropy Bulk Metallic Glasses 2018 56 1 14 10.3365/KJMM.2018.56.1.14 Anurag Bajpai, Jatin Bhatt, Krishanu Biswas, Nilesh P. Gurao A new perspective to thermodynamical designing of high entropy bulk metallic glasses (HE-BMGs) Physica B: Condensed Matter 2020 595 412350 10.1016/j.physb.2020.412350
429 Minah Jo, Eun-Ae Choi, Jee Hyuk Ahn, Young Guk Son, Kwangho Kim, Jehyun Lee, Satoshi Semboshi, Seung Zeon Han Effect of Prior Cold Working before Aging on the Precipitation Behavior in a Cu-3.5 wt% Ti Alloy 2019 57 1 10 10.3365/KJMM.2019.57.1.10 Min Kyeong Jang, Nam Chul Cho A Study on the Corrosion and Microstructure Characteristics of Early Iron Age Bronze Swords Excavated from Sinpung Site in Wanju, Jeollabuk-Do, Republic of Korea Korean Journal of Metals and Materials 2020 58 7 472 10.3365/KJMM.2020.58.7.472
430 Minah Jo, Eun-Ae Choi, Jee Hyuk Ahn, Young Guk Son, Kwangho Kim, Jehyun Lee, Satoshi Semboshi, Seung Zeon Han Effect of Prior Cold Working before Aging on the Precipitation Behavior in a Cu-3.5 wt% Ti Alloy 2019 57 1 10 10.3365/KJMM.2019.57.1.10 Sang Jin Lee, Hyeon Seok Shin, Eun-Ae Choi, Jee Hyuk Ahn, Yoonsuk Choi, Sangshik Kim, Jehyun Lee, Seung Zeon Han Effect of Pre-Aging Treatment on the Mechanical Properties of Cold Rolled Cu-6 wt% Ni-1.4 wt% Si Alloy Korean Journal of Metals and Materials 2020 58 7 488 10.3365/KJMM.2020.58.7.488
431 Tae-Hoon Kang, Kyu-Sik Kim, Soon-Hong Park, Kee-Ahn Lee Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process 2018 56 6 423 10.3365/KJMM.2018.56.6.423 Min-Seok Baek, Ji-Won Kim, Bae-Gun Park, Hee-Sub Park, Kee-Ahn Lee Effect of Co Leaching on the Vertical Turning Lathe Wear Properties of Polycrystalline Diamond Compact Manufactured by High Temperature and High Pressure Sintering Process Korean Journal of Metals and Materials 2020 58 7 480 10.3365/KJMM.2020.58.7.480
432 Hong-Il So, Joo-eun Lee, Yeon-Chul Cho, Jae-Woo Ahn, Ho-Jin Ryu Leaching of Silver (Ag) from Electronic Scrap by Thiourea 2018 56 7 511 10.3365/KJMM.2018.56.7.511 Ikgyu Kim, Kwangbae Kim, Ohsung Song Effects of Thiourea Stripping of 14 Karat White Gold Alloys With the Addition of SDS Surfactant Korean Journal of Metals and Materials 2020 58 7 447 10.3365/KJMM.2020.58.7.447
433 Woo-Jin Cho, Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon Mechanical Properties and Fabrication of 4YSZ-BN Composites by Pulsed Current Activated Sintering 2019 57 12 764 10.3365/KJMM.2019.57.12.764 Seong-Eun Kim, Su-Hwan Hong, In-Jin Shon Mechanical Properties and Rapid Sintering of WC-BN-Al Composites Korean Journal of Metals and Materials 2020 58 7 453 10.3365/KJMM.2020.58.7.453
434 Kijung Park, Dae Hyun Cho, Min-Ho Park, Cheol-Woong Yang Effects of Molybdenum on HIC Susceptibility in Normalized Pressure Vessel Steels for Sour Service Applications 2019 57 7 405 10.3365/KJMM.2019.57.7.405 Thanh Tuan Nguyen, Naehyung Tak, Jaeyeong Park, Seung Hoon Nahm, Un Bong Beak Hydrogen embrittlement susceptibility of X70 pipeline steel weld under a low partial hydrogen environment International Journal of Hydrogen Energy 2020 45 43 23739 10.1016/j.ijhydene.2020.06.199
435 Hyeon Gon Oh, DongKook Park, Yangdo Kim, Man Sig Lee Effect of P/Al Molar Ratio and Curing Conditions of CBAPC Binder on Flexural Strength and Moisture Resistance of Artificial Sand Core 2019 57 12 808 10.3365/KJMM.2019.57.12.808 Young Min Jin, Joon Hyuk Lee, Sang Sun Choi Correlations Between Alkali and Crystallinity in lyocell-Based ACF Probed with X-Ray Diffraction Korean Journal of Metals and Materials 2020 58 7 495 10.3365/KJMM.2020.58.7.495
436 Gunchoo Shim Factors Influencing Plasma Electrolytic Oxidation(PEO) Coatings on Magnesium Alloys: A Review 2017 55 5 296 10.3365/KJMM.2017.55.5.296 Tullio Monetta, Pooyan Parnian, Annalisa Acquesta Recent Advances in the Control of the Degradation Rate of PEO Treated Magnesium and Its Alloys for Biomedical Applications Metals 2020 10 7 907 10.3390/met10070907
437 Jang-Yeul Tak, Young Soo Lim Thermoelectric Properties of Cu1.98Se Prepared by Melt-spinning Process 2018 56 7 532 10.3365/KJMM.2018.56.7.532 Seung Hyun Jin, Young Soo Lim Effect of Zn-Doping on the Phase Transition Behavior and Thermoelectric Transport Properties of Cu2Se Korean Journal of Metals and Materials 2020 58 7 466 10.3365/KJMM.2020.58.7.466
438 Seong-Eun Kim, In-Jin Shon Rapid Sintering of Nanocrystalline (W,Ti)C-Graphene Composites 2018 56 12 854 10.3365/KJMM.2018.56.12.854 Seong-Eun Kim, Su-Hwan Hong, In-Jin Shon Mechanical Properties and Rapid Sintering of WC-BN-Al Composites Korean Journal of Metals and Materials 2020 58 7 453 10.3365/KJMM.2020.58.7.453
439 Woo-Jin Cho, Se-Hoon Oh, In-Jin Shon Effect of BN Addition on the Mechanical Properties of AlN 2019 57 5 310 10.3365/KJMM.2019.57.5.310 Seong-Eun Kim, Su-Hwan Hong, In-Jin Shon Mechanical Properties and Rapid Sintering of WC-BN-Al Composites Korean Journal of Metals and Materials 2020 58 7 453 10.3365/KJMM.2020.58.7.453
440 Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process 2019 57 4 227 10.3365/KJMM.2019.57.4.227 Ji-Won Oh, Jinsu Park, Hanshin Choi Multi-step Metals Additive Manufacturing Technologies Journal of Korean Powder Metallurgy Institute 2020 27 3 256 10.4150/KPMI.2020.27.3.256
441 Thi Thuy Nhi Nguyen, Man Seung Lee Improvement of Alumina Dissolution from the Mechanically Activated Dross Using Ultrasound-Assisted Leaching 2019 57 3 154 10.3365/KJMM.2019.57.3.154 Murat Türk, Mahmut Altıner, Soner Top, Serkan Karaca, Chafia Bouchekrit Production of Alpha-Alumina from Black Aluminum Dross Using NaOH Leaching Followed by Calcination JOM 2020 72 10 3358 10.1007/s11837-020-04281-7
442 Ji-Goo Heo, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim Effect of Pre-Aging Treatment on Bake-Hardenability of Al-8.0Zn-2.5Mg-2.0Cu Alloy Sheet Fabricated by Twin-Roll Casting Process 2019 57 6 396 10.3365/KJMM.2019.57.6.396 Qianhao Zang, Di Feng, Yun-Soo Lee, Hongmei Chen, Min-Seok Kim, Hyoung-Wook Kim Microstructure and mechanical properties of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy strip fabricated by twin roll casting and hot rolling Journal of Alloys and Compounds 2020 847 156481 10.1016/j.jallcom.2020.156481
443 Min-su Lee, Jong Bae Jeon, Tea-Sung Jun Investigation of Local Deformation Behaviour of Metallic Materials and Recent Research Trends: A Review 2018 56 9 635 10.3365/KJMM.2018.56.9.635 Tae-kyung Lee, Seokmin Hong, Jongmin Kim, Min-Chul Kim, Jae-il Jang Evaluation of Transition Temperature in Reactor Pressure Vessel Steels 6using the Fracture Energy Transition Curve from a Small Punch Test Korean Journal of Metals and Materials 2020 58 8 522 10.3365/KJMM.2020.58.8.522
444 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Jinhyeok Bang, Yongjoon Kang, Namkyu Kim, Seong-Moon Seo, Sanghoon Lee, Sangwoo Song, Namhyun Kang Effect of Aging Heat Treatment Conditions on the Mechanical Properties and Microstructure of Base and Weld Metal of Alloy 282 Superalloy Korean Journal of Metals and Materials 2020 58 8 540 10.3365/KJMM.2020.58.8.540
445 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Wonchul Yang, Choong-Heui Chung, Sangyeob Lee, Kyeong Ho Baek, Youngmoo Kim, Seong Lee, Joon Sik Park Microstructures and Oxidation Behaviors of Silicide Coated Nb Alloys by Halide Activated Pack Cementation Process Korean Journal of Metals and Materials 2020 58 8 507 10.3365/KJMM.2020.58.8.507
446 Junyeong Jeong, Sang-Cheon Park, Ga-Young Shin, Chang Wook Lee, Tae-Jeong Kim, Min-Su Choi Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel 2018 56 11 787 10.3365/KJMM.2018.56.11.787 Min Ki Ji, Hyunsung Son, Jinkeun Oh, Seongwoo Kim, Kyungmok Kim, Tea-Sung Jun Effects of Al-Si Coating Thickness on 22MnB5 in Hot Stamping Wear Korean Journal of Metals and Materials 2020 58 8 573 10.3365/KJMM.2020.58.8.573
447 Ho Jun Park, Jun Ho Lee, Byeong Uk Min, Suk Jun Kim The Effect of Post Annealing on Physical Properties of NiTe2 Thin Film Fabricated by Magnetron Sputtering 2020 58 3 195 10.3365/KJMM.2020.58.3.195 Myung Sik Choi, Han Gil Na, Changhyun Jin, Kyu Hyoung Lee Extended Energy Conservation Law in Alloys: the Absence of Energy Non-Equilibrium Korean Journal of Metals and Materials 2020 58 8 566 10.3365/KJMM.2020.58.8.566
448 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Gyung Tae Lee, Jong Woo Won, Ka Ram Lim, Minju Kang, Heoun Jun Kwon, Young Sang Na, Yoon Suk Choi Effect of Microstructural Features on the High-Cycle Fatigue Behavior of CoCrFeMnNi High-Entropy Alloys Deformed at Room and Cryogenic Temperatures Metals and Materials International 2021 27 4 593 10.1007/s12540-020-00786-7
449 Je In Lee, Hyun Seok Oh, Jun Hyuk Kim, Eun Soo Park Effect of Configurational Entropy of Mixing on Thermophysical Properties in Single Phase FCC Solid Solutions with Multi-Principal Elements 2017 55 1 1 10.3365/KJMM.2017.55.1.1 Zhidan Zhou, Yongxiong Chen, Zhenfeng Hu, Baolong Shen, Xiubing Liang Numerical Investigation of Particles in Warm-Particle Peening-Assisted High-Velocity Oxygen Fuel (WPPA-HVOF) Spraying Journal of Thermal Spray Technology 2020 29 7 1682 10.1007/s11666-020-01063-0
450 Jikwang Chae, Jung-Min Oh, Suhwan Yoo, Jae-Won Lim Eco-Friendly Pretreatment of Titanium Turning Scraps and Subsequent Preparation of Ferro-Titanium Ingots 2019 57 9 569 10.3365/KJMM.2019.57.9.569 Gye-Hoon Cho, Taeheon Kim, Jikwang Chae, Jae-Won Lim Preparing low-oxygen titanium powder by calcium reductant from titanium hydride Advanced Powder Technology 2020 31 9 3774 10.1016/j.apt.2020.07.020
451 Hyun-Kuk Park, Jeong-Han Lee, Jun-Ho Jang, Ik-Hyun Oh Property Evaluation of Binderless-WC Hard Materials as a Function of Sintering Temperature 2019 57 5 304 10.3365/KJMM.2019.57.5.304 Ju-Hun Kim, Jeong-Han Lee, Junho Jang, Ik-Hyun Oh, Sung-Kil Hong, Hyun Kuk Park Property Evaluation of Tungsten-Carbide Hard Materials as a Function of Fe Contents Korean Journal of Metals and Materials 2020 58 8 533 10.3365/KJMM.2020.58.8.533
452 Jong-hyoung Kim, Jinwoo Lee, Woojoo Kim, Jongheon Kim, Seung-Kyun Kang, Dongil Kwon Characterization of Viscoelastic Behavior of Poly(dimethylsiloxane) by Nanoindentation 2019 57 5 289 10.3365/KJMM.2019.57.5.289 Woojoo Kim, Kyungyul Lee, Jong-hyoung Kim, Young-Cheon Kim, Dongil Kwon A Further Study on Knoop Indentation Plastic Deformation for Evaluating Residual Stress Korean Journal of Metals and Materials 2020 58 8 515 10.3365/KJMM.2020.58.8.515
453 Tae-Hoon Kang, Kyu-Sik Kim, Soon-Hong Park, Kee-Ahn Lee Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process 2018 56 6 423 10.3365/KJMM.2018.56.6.423 Donghyuck Jung, Changkyoo Park, Eun-Joon Chun, Yoon-Jun Kim Improvement of Wear Resistance in Laser Shock-Peened Copper Contacts Korean Journal of Metals and Materials 2020 58 8 560 10.3365/KJMM.2020.58.8.560
454 Hee-Ju Kim, Jeki Jung, Su-Hyeon Kim, Cha-Yong Lim, Yoon Suk Choi Effect of Heat Treatment on Mechanical Properties and Energy Absorption Capacity of 7003 Aluminum Alloy 2020 58 1 7 10.3365/KJMM.2020.58.1.7 Myung Sik Choi, Han Gil Na, Changhyun Jin, Kyu Hyoung Lee Extended Energy Conservation Law in Alloys: the Absence of Energy Non-Equilibrium Korean Journal of Metals and Materials 2020 58 8 566 10.3365/KJMM.2020.58.8.566
455 Sung Taek Park, Ju Yeong Kim, Gwang Lyeon Kim, Hyun-Su Kang, Kyeong Won Oh, Hyung-Ki Park, Yi Hwa Song Study of Shape and Microstructure Changes of Ta Linear for Building an Explosively Formed Penetrator 2019 57 8 475 10.3365/KJMM.2019.57.8.475 Keunho Lee, Sanghyun Woo, Seok Bong Kim, Seong Lee, Leeju Park, Kyung-Tae Park Deformation and microstructural evolution of ultrafine- and fine-grained OFHC Cu during dynamic tensile extrusion Journal of Materials Research and Technology 2020 9 5 10746 10.1016/j.jmrt.2020.07.090
456 Cheol Woo Park, Jun Hyeong In, Jae Hwa Park, Kwang Bo Shim, Jeong Ho Ryu Up- and Downconversion Luminescence in Ho3+,Yb3+-Co-Doped Y2O3 Transparent Ceramics Prepared by Spark Plasma Sintering 2019 57 9 609 10.3365/KJMM.2019.57.9.609 Shuang Yang, Fei Chen, Qiang Shen, Lianmeng Zhang, Ao Huang, Huazhi Gu Influence of electric current on microstructure and electrical property of Al-doped ZnO ceramic consolidated by spark plasma sintering Ceramics International 2020 46 17 26539 10.1016/j.ceramint.2020.07.120
457 Min Soo Kim, Seung Zeon Han, Jehyun Lee, Sung Hwan Lim, Jee Hyuk Ahn, Sang-Shik Kim, Kwang Ho Kim Mechanical Properties of Discontinuous Precipitated Al-Zn Alloys after Drawing at Room and Cryogenic Temperatures 2017 55 2 77 10.3365/KJMM.2017.55.2.77 Seung Zeon Han, Eun-Ae Choi, Sung Hwan Lim, Sangshik Kim, Jehyun Lee Alloy design strategies to increase strength and its trade-offs together Progress in Materials Science 2020 100720 10.1016/j.pmatsci.2020.100720
458 Soon Yong Park, Dong Bok Lee Effect of Mn, Si, and Sb on High-temperature Oxidation of Fe-Mn-Al-Si-Sb-C Steels 2017 55 5 308 10.3365/KJMM.2017.55.5.308 Wonchul Yang, Choong-Heui Chung, Sangyeob Lee, Kyeong Ho Baek, Youngmoo Kim, Seong Lee, Joon Sik Park Microstructures and Oxidation Behaviors of Silicide Coated Nb Alloys by Halide Activated Pack Cementation Process Korean Journal of Metals and Materials 2020 58 8 507 10.3365/KJMM.2020.58.8.507
459 Hyun Jun Kwon, Ka Ram Lim, Yong Tae Lee, Dong Geun Lee, Jun Hee Lee, Seung Eon Kim Effect of Aging Time and Temperature on Microstructure and Mechanical Properties of Ti-39Nb-6Zr Alloy 2016 54 12 925 10.3365/KJMM.2016.54.12.925 Janu Ageng Nugroho, Ghozali Suprobo, Nokeun Park, Eung Ryul Baek Investigation of Dynamic Recrystallization Phenomenon in Drawn Ti-6Al-4V Alloy Materials Science Forum 2020 1000 419 10.4028/www.scientific.net/MSF.1000.419
460 Jang Sik Park, Jin Ok Joo Evolution of High Tin Bronze Technology in Korea as Observed in Bronze Objects of the Unified Silla Period, Excavated from the National Gyongju Museum Site 2016 54 12 937 10.3365/KJMM.2016.54.12.937 Min Kyeong Jang, Nam Chul Cho A Study on the Corrosion and Microstructure Characteristics of Early Iron Age Bronze Swords Excavated from Sinpung Site in Wanju, Jeollabuk-Do, Republic of Korea Korean Journal of Metals and Materials 2020 58 7 472 10.3365/KJMM.2020.58.7.472
461 Kyung-Wook Jang, Hyeok-Jin Kim, Woo-Jin Jung, Il-Ho Kim Charge Transport and Thermoelectric Properties of P-type Bi2-xSbxTe3 Prepared by Mechanical Alloying and Hot Pressing 2018 56 1 66 10.3365/KJMM.2018.56.1.66 Peyala Dharmaiah, Kap-Ho Lee, Sung Ho Song, Hyoung Seop Kim, Soon-Jik Hong Enhanced thermoelectric performance of Bi0.5Sb1.5Te3 composites through potential barrier scattering at heterogeneous interfaces Materials Research Bulletin 2021 133 111023 10.1016/j.materresbull.2020.111023
462 Hyun Hwa Park, Jun Yun Kang, Heon-Young Ha, Tae-Ho Lee, Hyun Uk Hong Acceleration of Nano-Sized NbC Precipitation and Improvement of Creep Resistance in Alumina-Forming Austenitic Stainless Steel via Cold Working 2017 55 7 470 10.3365/KJMM.2017.55.7.470 Jundong Jiang, Ziyun Liu, Qiuzhi Gao, Hailian Zhang, Aimin Hao, Fu Qu, Xiaoping Lin, Huijun Li The effect of isothermal aging on creep behavior of modified 2.5Al alumina-forming austenitic steel Materials Science and Engineering: A 2020 797 140219 10.1016/j.msea.2020.140219
463 So-Yeong Kang, Kyeong-Ho Baik, Sang-Hoon Yoon, Hyung-Jun Kim Effects of Feedstock Powder Characteristics on the Microstructural Features and Erosion Resistance of WC-12Co Coatings 2018 56 2 113 10.3365/KJMM.2018.56.2.113 Maksim Dvornik, Elena Mikhailenko, Sergey Nikolenko, Nuria Vlasova, Andrey Skiruta Production of ultrafine-grained spherical β-WC-W2C-Co microparticles by electro discharge erosion of WC-15Co alloy in glycerol and their solutions Materials Research Express 2020 7 9 096504 10.1088/2053-1591/abb0d6
464 Sang-Hyun Roh, Jiwon Kim, Woon-Ik Park, Yang-Do Kim, Jae-Hong Lim Fabrication and Characterization of Ge2Sb2Te5 Nanowire Arrays and PEDOT: PSS Hybrid Thermoelectric Composites 2017 55 6 432 10.3365/KJMM.2017.55.6.432 Sunghun Cho, Jun Seop Lee Recent Development of Morphology Controlled Conducting Polymer Nanomaterial-Based Biosensor Applied Sciences 2020 10 17 5889 10.3390/app10175889
465 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Stylianos Spathariotis, Nand Peeters, Karl S. Ryder, Andrew P. Abbott, Koen Binnemans, Sofia Riaño Separation of iron(iii), zinc(ii) and lead(ii) from a choline chloride–ethylene glycol deep eutectic solvent by solvent extraction RSC Advances 2020 10 55 33161 10.1039/D0RA06091G
466 Min A Bae, Man Sig Lee, Jae Ho Baek The Effect of the Surface Energy of Water Glass on the Fluidity of Sand 2020 58 5 319 10.3365/KJMM.2020.58.5.319 Kyeong Ho Kim, Min A. Bae, Man Sig Lee, Hung-Suck Park, Jae Ho Baek Regeneration of used sand with sodium silicate binder by wet method and their core manufacturing Journal of Material Cycles and Waste Management 2021 23 1 121 10.1007/s10163-020-01103-5
467 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Synthesis and Characterization of ZnO/TiO2 Photocatalyst Decorated with PbS QDs for the Degradation of Aniline Blue Solution 2018 56 12 900 10.3365/KJMM.2018.56.12.900 P. Muhambihai, V. Rama, P. Subramaniam Photocatalytic degradation of aniline blue, brilliant green and direct red 80 using NiO/CuO, CuO/ZnO and ZnO/NiO nanocomposites Environmental Nanotechnology, Monitoring & Managem 2020 14 100360 10.1016/j.enmm.2020.100360
468 Sung Soo Kim, Young Suk Kim, Jong Yeob Jung Effects of Short Range Ordering on Aging Phenomenon in Zr-2.5%Nb Pressure Tube Material 2018 56 7 479 10.3365/KJMM.2018.56.7.479 SungSoo Kim, Jung Jong Yeob, Young Suk Kim Short Range Ordering (SRO) Reaction in Ni-base Alloy X-750 Korean Journal of Metals and Materials 2020 58 9 590 10.3365/KJMM.2020.58.9.590
469 Changsoo Lee, Kihoon Bang, Doosun Hong, Hyuck Mo Lee Recent Progress in First Principle Calculation and High-Throughput Screening of Electrocatalysts: A Review 2019 57 1 1 10.3365/KJMM.2019.57.1.1 Jae-Won Lee, Se-Young Oh, Bora Park, Min-Suk Oh, Sung Jin Kim Corrosion Behaviors of the Eutectic Structure in Zn-Al-Mg Alloy Coated Steel in Chloride Containing Aqueous Environment Korean Journal of Metals and Materials 2020 58 9 610 10.3365/KJMM.2020.58.9.610
470 Eunwook Jeong, Gun-Hwan Lee, Young-Rae Cho, Jungheum Yun Optimization of Flexible, Transparent TiO2/Cu/ZnO Electrodes by Simultaneous Suppression of Optoelectrical Losses and Pinhole Formation 2019 57 5 316 10.3365/KJMM.2019.57.5.316 Jae Young Hyeon, Sung-Hoon Choa, Kyoung Wan Park, Jung Hyun Sok Graphene Oxide Coated Silver Nanofiber Transparent Conducting Electrode Korean Journal of Metals and Materials 2020 58 9 626 10.3365/KJMM.2020.58.9.626
471 Ju Hyeong Sun, Young Soo Lim Thermoelectric Properties of p-type Polycrystalline Si Prepared by Melt-Spinning Process 2018 56 9 686 10.3365/KJMM.2018.56.9.686 Hyun Ah Im, Jun Young Jeong, Su Bong An, Keun Young Sohn, Won-Wook Park A study on the Microstructures and the Suppression of Grain Growth in Rapidly Solidified Fe-Si-B(-Cu-Zr-Ca) Base Nanostructured Alloys Korean Journal of Metals and Materials 2020 58 9 633 10.3365/KJMM.2020.58.9.633
472 Yu-Sung Kim, Jin-Young Choi, Yun-Je Park, Su-Hyeon Choe, Young-Min Kong, Daeil Kim Influence of Film Thickness on the Electrical and Optical Properties of ZnO/Ag/SnO2 Tri-Layer Films 2019 57 5 324 10.3365/KJMM.2019.57.5.324 Euije Jo, Dongwan Kim, Jae-Young Leem Facile Synthesis of ZnO Thin Films at Low Temperatures Using an Additive-Free Electrochemical Oxidation Method Korean Journal of Metals and Materials 2020 58 9 645 10.3365/KJMM.2020.58.9.645
473 Jae-Won Lee, Sung-Jin Kim, Min-Suk Oh Influence of Alloy Content on Microstructure and Corrosion Resistance of Zn-based Alloy Coated Steel Product 2020 58 3 169 10.3365/KJMM.2020.58.3.169 Jae-Won Lee, Se-Young Oh, Bora Park, Min-Suk Oh, Sung Jin Kim Corrosion Behaviors of the Eutectic Structure in Zn-Al-Mg Alloy Coated Steel in Chloride Containing Aqueous Environment Korean Journal of Metals and Materials 2020 58 9 610 10.3365/KJMM.2020.58.9.610
474 Moo Young Jung, Chang Su Nam, Byung-Sik Lee, Yong Choi Study on the Effect of the Thiourea on Nano-Mechanical Properties and Microstructures of the Electroformed Thin Ni-P Foil 2020 58 1 1 10.3365/KJMM.2020.58.1.1 Yong Choi Preparation of Electroformed Copper-Nickel Multi-Nano-Layers and Characterization of Their Electromagnetic Shielding Effectiveness Korean Journal of Metals and Materials 2020 58 9 639 10.3365/KJMM.2020.58.9.639
475 Eun Hye Hwang, Hwan Goo Seong, Sung Jin Kim Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications 2018 56 8 570 10.3365/KJMM.2018.56.8.570 Jin Sung Park, Jin Woo Lee, Joong Ki Hwang, Sung Jin Kim Effects of Alloying Elements (C, Mo) on Hydrogen Assisted Cracking Behaviors of A516-65 Steels in Sour Environments Materials 2020 13 18 4188 10.3390/ma13184188
476 Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel 2019 57 8 491 10.3365/KJMM.2019.57.8.491 Dong Min Cho, Jin-seong Park, Jin Woo Lee, Sung Jin Kim Study on Hydrogen Diffusion and Sulfide Stress Cracking Behaviors of Simulated Heat-Affected Zone of A516-65 Grade Pressure Vessel Carbon Steel Korean Journal of Metals and Materials 2020 58 9 599 10.3365/KJMM.2020.58.9.599
477 Jong-Ho Lee, Hong-Joo Ahn, Jeong-Il Youn, Young-Jig Kim, Su-Jeong Suh, Han-Jun Oh Photocatalytic Characterization of TiO2 Nanotubes with Pd Particles Synthesized by Photoreduction Process 2019 57 8 510 10.3365/KJMM.2019.57.8.510 Soo Hyun Park, Won-Sik Jung, Abhijit N Kadam, Sang-Wha Lee Cubic-shape hematite decorated with plasmonic Ag-Au bimetals for enhanced photocatalysis under visible light irradiation Materials Research Express 2020 7 9 095014 10.1088/2053-1591/abb90c
478 Seokmin Hong, Cholong Lee, Min-Chul Kim, Bong-Sang Lee Effects of Microstructure Variation on Tensile and Charpy Impact Properties in Heavy-Section SA508 Gr.3 Low Alloy Steels for Commercial Reactor Pressure Vessel 2017 55 11 752 10.3365/KJMM.2017.55.11.752 Haeju Jo, Moonseok Kang, Geon-Woo Park, Byung-Jun Kim, Chang Yong Choi, Hee Sang Park, Sunmi Shin, Wookjin Lee, Yong-Sik Ahn, Jong Bae Jeon Effects of Cooling Rate during Quenching and Tempering Conditions on Microstructures and Mechanical Properties of Carbon Steel Flange Materials 2020 13 18 4186 10.3390/ma13184186
479 Woo-Jin Jung, Hyeok-Jin Kim, Il-Ho Kim Charge Transport and Thermoelectric Properties of N-type Bi2-xSbxTe3-ySey:Im Prepared by Encapsulated Melting and Hot Pressing 2018 56 7 544 10.3365/KJMM.2018.56.7.544 Bejan Hamawandi, Hamta Mansouri, Sedat Ballikaya, Yunus Demirci, Martina Orlovská, Nafiseh Bolghanabadi, Seyed Abdolkarim Sajjadi, Muhammet S. Toprak A Comparative Study on the Thermoelectric Properties of Bismuth Chalcogenide Alloys Synthesized through Mechanochemical Alloying and Microwave-Assisted Solution Synthesis Routes Frontiers in Materials 2020 7 10.3389/fmats.2020.569723
480 Yeonjung Hwang, Chang Wook Lee, Ga-Young Shin, Ji Hong Yoo, Minsu Choi Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel 2019 57 3 193 10.3365/KJMM.2019.57.3.193 Si On Kim, Won Seog Yang, Sung Jin Kim Effects of the Combined Addition of Zn and Mg on Corrosion Behaviors of Electropainted AlSi-Based Metallic Coatings Used for Hot-Stamping Steel Sheets Materials 2020 13 15 3379 10.3390/ma13153379
481 Soo-Bae Kim, Young-Hee Cho, Jung-Moo Lee, Jae-Gil Jung, Su Gun Lim The Effect of Ultrasonic Melt Treatment on the Microstructure and Mechanical Properties of Al-7Si-0.35Mg Casting Alloys 2017 55 4 240 10.3365/KJMM.2017.55.4.240 Moon-Jo Kim, Jong Pil Yun, Ji-Ba-Reum Yang, Seung-Jun Choi, DongEung Kim Prediction of the Temperature of Liquid Aluminum and the Dissolved Hydrogen Content in Liquid Aluminum with a Machine Learning Approach Metals 2020 10 3 330 10.3390/met10030330
482 Minah Jo, Eun-Ae Choi, Jee Hyuk Ahn, Young Guk Son, Kwangho Kim, Jehyun Lee, Satoshi Semboshi, Seung Zeon Han Effect of Prior Cold Working before Aging on the Precipitation Behavior in a Cu-3.5 wt% Ti Alloy 2019 57 1 10 10.3365/KJMM.2019.57.1.10 Jee Hyuk Ahn, Seung Zeon Han, Eun-Ae Choi, Hyunjong Lee, Sung Hwan Lim, Jehyun Lee, Kwangho Kim, Nong Moon Hwang, Heung Nam Han The effect of bimodal structure with nanofibers and normal precipitates on the mechanical and electrical properties of Cu Ni Si alloy Materials Characterization 2020 170 110642 10.1016/j.matchar.2020.110642
483 Young Soo Lim, Minseok Song, Soonil Lee, Won-Seon Seo Effects of Cu-doping on the Power Factor of Bi0.42Sb1.58Te3 Thermoelectric Compounds Prepared by Hot Pressing 2017 55 6 427 10.3365/KJMM.2017.55.6.427 Seung Hyun Jin, Young Soo Lim Effect of Zn-Doping on the Phase Transition Behavior and Thermoelectric Transport Properties of Cu2Se Korean Journal of Metals and Materials 2020 58 7 466 10.3365/KJMM.2020.58.7.466
484 Gyeong Yun Baek, Gwang Yong Shin, Ki Yong Lee, Do Sik Shim A Study on Micro-Structure and Wear Behavior of AISI M4 and CPM15V Deposited by Laser Melting 2018 56 6 430 10.3365/KJMM.2018.56.6.430 Kyeongsik Ha, Young Keun Park, Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, Wookjin Lee Effects of Heat Treatment Condition and Counter Materials on the Wear Behavior of Laser Direct Energy Deposited Fe-8Cr-3V-2Mo-2W Alloy Korean Journal of Metals and Materials 2020 58 10 680 10.3365/KJMM.2020.58.10.680
485 Sang Yup Lim, SungSoo Kim, Gyeong-Geun Lee Hydride Precipitation Behavior with Hydrogen Concentration and Homogenization Temperature in Zr-2.5%Nb Pressure Tube Material 2019 57 4 203 10.3365/KJMM.2019.57.4.203 SungSoo Kim, Sang Yup Lim, Gyeong-Geun Lee Effect of β Phase Decomposition on Recrystallization in α-Zr Region in Zr-2.5%Nb Pressure Tube Material Korean Journal of Metals and Materials 2020 58 10 672 10.3365/KJMM.2020.58.10.672
486 Ui Gu Kang, Won Jong Nam Evolution of Microstructures and Mechanical Properties of 5052 Aluminum Alloys with Variation of Rolling and Annealing Temperatures 2019 57 10 632 10.3365/KJMM.2019.57.10.632 Wonkee Chae, Bong-Kyu Kim, Jongbeom Lee, Jun Hyun Han Effects of Initial Precipitate on Shear Deformation during Asymmetric Rolling of Al-Mg-Si Alloy: Texture and Formability Korean Journal of Metals and Materials 2020 58 10 703 10.3365/KJMM.2020.58.10.703
487 Daekyun Kim, Taehyeong Lee, Dooho Choi Optimization of ZnO/Cu/ZnO Flexible Transparent Conductive Electrodes Fabricated by Magnetron Sputtering 2019 57 12 795 10.3365/KJMM.2019.57.12.795 Dooho Choi Deposition of Low-Resistivity Aluminum Thin Films Via Application of Substrate Bias During Magnetron Sputtering Korean Journal of Metals and Materials 2020 58 10 715 10.3365/KJMM.2020.58.10.715
488 Hyun Jun Cho, Hyun-Sik Kim, Sang-Il Kim Effect of Cu/In Doping on the Thermoelectric Transport Properties of Bi-Sb-Te Alloys 2019 57 10 673 10.3365/KJMM.2019.57.10.673 Yerim Yang, TaeWan Kim, Seokown Hong, Jiwoo An, Sang-il Kim Influence of Te Vacancies on the Thermoelectric Properties of n-type Cu0.008Bi2Te2.7-xSe0.3 Korean Journal of Metals and Materials 2020 58 10 721 10.3365/KJMM.2020.58.10.721
489 Eun-Joon Chun, Changkyoo Park, Wonah Park Study on the Selective Surface Modification of Injection Mold Steels by Laser Materials Processing: Relationship Between AlN Formation and Surface Hardening During Laser Nitriding 2020 58 1 32 10.3365/KJMM.2020.58.1.32 Kyeong-Min Kim, Ye-Seon Jeong, Ahjin Sim, Wonah Park, Changkyoo Park, Eun-Joon Chun Effect of Post-clad Heat Treatment on Microstructures and Mechanical Properties of Cu–NiCrBSi Dissimilar Laser Clads Korean Journal of Materials Research 2020 30 9 465 10.3740/MRSK.2020.30.9.465
490 Eun-Joon Chun Nanostructuring Behavior of NiCrBSi and CoCrWC Thermal Spray Coatings Formed by Temperature-Controlled Laser Heat Treatment 2020 58 4 247 10.3365/KJMM.2020.58.4.247 Kyeong-Min Kim, Ye-Seon Jeong, Ahjin Sim, Wonah Park, Changkyoo Park, Eun-Joon Chun Effect of Post-clad Heat Treatment on Microstructures and Mechanical Properties of Cu–NiCrBSi Dissimilar Laser Clads Korean Journal of Materials Research 2020 30 9 465 10.3740/MRSK.2020.30.9.465
491 Woo Hyeon Jo, Dooho Choi Optimization of ZnO/Ag/ZnO Transparent Conductive Electrodes Fabricated by Magnetron Sputtering 2019 57 2 91 10.3365/KJMM.2019.57.2.91 Xue-Nan Liu, Jun Gao, Jian-Hong Gong, Wan-Xia Wang, Sheng-Chi Chen, Ming-Jiang Dai, Song-Sheng Lin, Qian Shi, Hui Sun Optoelectronic properties of an AZO/Ag multilayer employed as a flexible electrode Ceramics International 2021 47 4 5671 10.1016/j.ceramint.2020.10.153
492 Jae Il Kim, Kwang Sun Hwang Effect of Annealing Temperature on the Shape Memory Properties of Ti-44.5Ni-5Cu and Ti-45.2Ni-5Cu(at%) Alloys 2019 57 9 562 10.3365/KJMM.2019.57.9.562 Dohyoung Kim, Yonghwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yongho Park Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys Korean Journal of Metals and Materials 2020 58 10 660 10.3365/KJMM.2020.58.10.660
493 Wan Kim, Jinwoo Kim, Je In Lee, Eun Soo Park Development of Al-Based Metallic Glass Composites Containing Pb-Rich Crystalline 2nd Phase 2020 58 2 77 10.3365/KJMM.2020.58.2.77 Yang Zhou, Fei Zhou, Joao Marcos Ribeiro Martins, Philip Nash, Jun Wang The effect of discontinuous γ' precipitation on the mechanical properties of Al-Co-Ni alloys Materials Characterization 2019 151 612 10.1016/j.matchar.2019.04.003
494 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Si Jeong Song, Minh Nhan Le, Man Seung Lee Separation of Gallium(III) and Indium(III) by Solvent Extraction with Ionic Liquids from Hydrochloric Acid Solution Processes 2020 8 11 1347 10.3390/pr8111347
495 Tae-Hoon Kang, Kyu-Sik Kim, Soon-Hong Park, Kee-Ahn Lee Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process 2018 56 6 423 10.3365/KJMM.2018.56.6.423 Kyeong-Min Kim, Ye-Seon Jeong, Ahjin Sim, Wonah Park, Changkyoo Park, Eun-Joon Chun Effect of Post-clad Heat Treatment on Microstructures and Mechanical Properties of Cu–NiCrBSi Dissimilar Laser Clads Korean Journal of Materials Research 2020 30 9 465 10.3740/MRSK.2020.30.9.465
496 Thanh Tuan Tran, Mudassir Iqbal, Man Seung Lee Comparison of the Extraction and Stripping Behavior of Iron (III) from Weak Acidic Solution Between Ionic Liquids and Commercial Extractants 2019 57 12 787 10.3365/KJMM.2019.57.12.787 Si Jeong Song, Minh Nhan Le, Man Seung Lee Separation of Gallium(III) and Indium(III) by Solvent Extraction with Ionic Liquids from Hydrochloric Acid Solution Processes 2020 8 11 1347 10.3390/pr8111347
497 Chang Geun Oh, Man Seung Lee Solvent Extraction of Tb(III) from Hydrochloric Acid Solution with Cyanex 272, Its Mixture and Ionic Liquid 2018 56 12 870 10.3365/KJMM.2018.56.12.870 Si Jeong Song, Minh Nhan Le, Man Seung Lee Separation of Gallium(III) and Indium(III) by Solvent Extraction with Ionic Liquids from Hydrochloric Acid Solution Processes 2020 8 11 1347 10.3390/pr8111347
498 Min A Bae, Myung Hwan Kim, Jeong-Wook Park, Man Sig Lee Effect of Additives on the Sand Burning of Inorganic Binder in Al-Si7Mg Alloy Casting 2018 56 4 327 10.3365/KJMM.2018.56.4.327 Kyeong Ho Kim, Min A. Bae, Man Sig Lee, Hung-Suck Park, Jae Ho Baek Regeneration of used sand with sodium silicate binder by wet method and their core manufacturing Journal of Material Cycles and Waste Management 2021 23 1 121 10.1007/s10163-020-01103-5
499 Sung Min Park, Myeong Je Jang, Yoo Sei Park, Jooyoung Lee, Jae-yeop Jeong, Jaehoon Jung, Min-Kwan Choi, Yu-Seong Noh, Min-Ho Seo, Hyung Ju Kim, Juchan Yang, Yang Do Kim, Sung Mook Choi Synthesis and Characterization of the Cu0.72Co2.28O4 Catalyst for Oxygen Evolution Reaction in an Anion Exchange Membrane Water Electrolyzer 2020 58 1 49 10.3365/KJMM.2020.58.1.49 Chae-Yeon Kwon, Jae-Yeop Jeong, Juchan Yang, Yoo Sei Park, Jaehoon Jeong, Honghyun Park, Yangdo Kim, Sung Mook Choi Effect of Copper Cobalt Oxide Composition on Oxygen Evolution Electrocatalysts for Anion Exchange Membrane Water Electrolysis Frontiers in Chemistry 2020 8 10.3389/fchem.2020.600908
500 Jeong Hun Lee, Yoo Sei Park, Myeong Je Jang, Sung Min Park, Kyu Hwan Lee, Woo Sung Choi, Sung Mook Choi, Yang Do Kim MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution 2018 56 12 885 10.3365/KJMM.2018.56.12.885 Longcheng Zhang, Haitao Zhao, Siran Xu, Qian Liu, Tingshuai Li, Yonglan Luo, Shuyan Gao, Xifeng Shi, Abdullah M. Asiri, Xuping Sun Recent Advances in 1D Electrospun Nanocatalysts for Electrochemical Water Splitting Small Structures 2021 2 2 2000048 10.1002/sstr.202000048
501 Yeun-Ah Joo, Young-Kyun Kim, Tae-Sik Yoon, Kee-Ahn Lee Microstructure and Mechanical Properties of 17-4PH Steel and Fe-Cr-B Alloy Mixed Material Manufactured Using Powder Injection Molding 2018 56 5 342 10.3365/KJMM.2018.56.5.342 Feng Shang, Zhiyong Wang, Xiaoqiu Chen, Zuchun Ji, Shubin Ren, Xuanhui Qu UNS S32707 hyper-duplex stainless steel processed by powder injection molding and supersolidus liquid-phase sintering in nitrogen sintering atmosphere Vacuum 2021 184 109910 10.1016/j.vacuum.2020.109910
502 Dooho Choi Potential of Ruthenium and Cobalt as Next-generation Semiconductor Interconnects 2018 56 8 605 10.3365/KJMM.2018.56.8.605 Hankyeol Seo, Haesung Park, Sarah Eunkyung Kim Comprehensive Analysis of a Cu Nitride Passivated Surface That Enhances Cu-to-Cu Bonding IEEE Transactions on Components, Packaging and Man 2020 10 11 1814 10.1109/TCPMT.2020.3024998
503 Eun Hye Hwang, Hwan Goo Seong, Sung Jin Kim Effect of Carbon Contents on Corrosion and Hydrogen Diffusion Behaviors of Ultra-Strong Steels for Automotive Applications 2018 56 8 570 10.3365/KJMM.2018.56.8.570 Seok-Woo Ko, Ji-Min Lee, Byoungchul Hwang Effect of Nb addition and Pre-strain on Hydrogen Embrittlement of Low-carbon Steels with Ferrite-pearlite Structure Korean Journal of Metals and Materials 2020 58 11 752 10.3365/KJMM.2020.58.11.752
504 Eunwook Jeong, Gun-Hwan Lee, Young-Rae Cho, Jungheum Yun Optimization of Flexible, Transparent TiO2/Cu/ZnO Electrodes by Simultaneous Suppression of Optoelectrical Losses and Pinhole Formation 2019 57 5 316 10.3365/KJMM.2019.57.5.316 Su-Hyeon Choe, Yun-Je Park, Yu-Sung Kim, Byung-Chul Cha, Sung-Bo Heo, Sungook Yoon, Young-Min Kong, Daeil Kim Enhanced Optical and Electrical Properties of Ti Doped In2O3 thin Films Treated by Post-deposition Electron Beam Irradiation Korean Journal of Metals and Materials 2020 58 11 793 10.3365/KJMM.2020.58.11.793
505 Jae-Won Lee, Bora Park, Sung Jin Kim Corrosion Resistance and Adhesion of Paint Coating Film on Zn-Mg-Al Hot-Dip Galvanized Steel Sheets 2019 57 2 77 10.3365/KJMM.2019.57.2.77 Moon-Hi Hong, In-kyu Kim, Hye-Jeong Yun Effect of Inorganic Filler Addition on Non-Combustible and Mechanical Properties of Color Coated Steel Sheets Korean Journal of Metals and Materials 2020 58 11 768 10.3365/KJMM.2020.58.11.768
506 Han-Sang Kim, Sung-Jin Kim Influence of the Thickness of TiO2/TiO2-x Layers on the Behavior of a Memristor Device 2019 57 2 84 10.3365/KJMM.2019.57.2.84 Su-Hyeon Choe, Yun-Je Park, Yu-Sung Kim, Byung-Chul Cha, Sung-Bo Heo, Sungook Yoon, Young-Min Kong, Daeil Kim Enhanced Optical and Electrical Properties of Ti Doped In2O3 thin Films Treated by Post-deposition Electron Beam Irradiation Korean Journal of Metals and Materials 2020 58 11 793 10.3365/KJMM.2020.58.11.793
507 Ui Gyeong Hwang, Young Soo Lim Thermoelectric Transport Properties of Interface-Controlled n-type Bismuth Telluride Selenide Composites by Reduced Graphene Oxide 2019 57 9 603 10.3365/KJMM.2019.57.9.603 Jung-Il Lee, Jeong Ho Ryu Transforming Carbon Black into Graphene Oxide Quantum Dots by Pulsed Laser Ablation in Ethanol Korean Journal of Metals and Materials 2020 58 11 808 10.3365/KJMM.2020.58.11.808
508 Hyo-Tae Jeong, MinSeong Kim, SangChul Kwon, SunTae Kim, Seong Lee, Shi-Hoon Choi Comparison Between Multi-Axial Forging and Multi-Axial Diagonal Forging of AA1100 Using Finite Element Analysis 2019 57 1 18 10.3365/KJMM.2019.57.1.18 Hyoung-Seo Son, Young-Gon Kim, Jin-Jae Kim, Young-Suk Kim Development of a Novel Plastic Hardening Model Based on Random Tree Growth Method Korean Journal of Metals and Materials 2020 58 11 741 10.3365/KJMM.2020.58.11.741
509 Woo Hyeon Jo, Dooho Choi Optimization of ZnO/Ag/ZnO Transparent Conductive Electrodes Fabricated by Magnetron Sputtering 2019 57 2 91 10.3365/KJMM.2019.57.2.91 Su-Hyeon Choe, Yun-Je Park, Yu-Sung Kim, Byung-Chul Cha, Sung-Bo Heo, Sungook Yoon, Young-Min Kong, Daeil Kim Enhanced Optical and Electrical Properties of Ti Doped In2O3 thin Films Treated by Post-deposition Electron Beam Irradiation Korean Journal of Metals and Materials 2020 58 11 793 10.3365/KJMM.2020.58.11.793
510 Yu-Sung Kim, Jin-Young Choi, Yun-je park, Su-Hyeon Choe, Byung-Chul Cha, Young-Min Kong, Daeil Kim Electron Irradiation Effects on the Optical and Electrical Properties of ZnO/Ag/SnO2 Thin Films 2020 58 3 190 10.3365/KJMM.2020.58.3.190 Su-Hyeon Choe, Yun-Je Park, Yu-Sung Kim, Byung-Chul Cha, Sung-Bo Heo, Sungook Yoon, Young-Min Kong, Daeil Kim Enhanced Optical and Electrical Properties of Ti Doped In2O3 thin Films Treated by Post-deposition Electron Beam Irradiation Korean Journal of Metals and Materials 2020 58 11 793 10.3365/KJMM.2020.58.11.793
511 Kijung Park, Dae Hyun Cho, Min-Ho Park, Cheol-Woong Yang Effects of Molybdenum on HIC Susceptibility in Normalized Pressure Vessel Steels for Sour Service Applications 2019 57 7 405 10.3365/KJMM.2019.57.7.405 Seok-Woo Ko, Ji-Min Lee, Byoungchul Hwang Effect of Nb addition and Pre-strain on Hydrogen Embrittlement of Low-carbon Steels with Ferrite-pearlite Structure Korean Journal of Metals and Materials 2020 58 11 752 10.3365/KJMM.2020.58.11.752
512 Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel 2019 57 8 491 10.3365/KJMM.2019.57.8.491 Seok-Woo Ko, Ji-Min Lee, Byoungchul Hwang Effect of Nb addition and Pre-strain on Hydrogen Embrittlement of Low-carbon Steels with Ferrite-pearlite Structure Korean Journal of Metals and Materials 2020 58 11 752 10.3365/KJMM.2020.58.11.752
513 Gi-Su Ham, Soon-Hong Park, Kee-Ahn Lee Room and Elevated Temperature Compressive Deformation Behavior of AISI 316L Alloy Fabricated by Selective Laser Melting Process 2019 57 5 295 10.3365/KJMM.2019.57.5.295 Giseung Shin, Ji hyun Yoon, Dae Whan Kim, Yongho Park, Jeoung Han Kim A Study on the Influence of Laser Power on the Microstructure and Mechanical Properties of Functionally Graded Materials Produced by Direct Energy Deposition Korean Journal of Metals and Materials 2020 58 11 782 10.3365/KJMM.2020.58.11.782
514 Byung Hak Choe, Hyeon Su Jang, Bum Gyu Lee, Eui Soo Kim, Woo Sik Kim, Un Bong Baek, Sung Hoon Nam Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test 2018 56 1 1 10.3365/KJMM.2018.56.1.1 Byung Hak Choe, Sang Woo Lee, Jong Kee Ahn, Jinhee Lee, Tae Woon Lim Hydrogen Induced Cracks in Stainless Steel 304 in Hydrogen Pressure and Stress Corrosive Atmosphere Korean Journal of Metals and Materials 2020 58 10 653 10.3365/KJMM.2020.58.10.653
515 Byung Hak Choe, Hyeon Su Jang, Bum Gyu Lee, Eui Soo Kim, Woo Sik Kim, Un Bong Baek, Sung Hoon Nam Hydrogen Induced Crack Propagation in Bainitic X70 Steel in Hydrogen Pressured Tensile Test 2018 56 1 1 10.3365/KJMM.2018.56.1.1 Seok-Woo Ko, Ji-Min Lee, Byoungchul Hwang Effect of Nb addition and Pre-strain on Hydrogen Embrittlement of Low-carbon Steels with Ferrite-pearlite Structure Korean Journal of Metals and Materials 2020 58 11 752 10.3365/KJMM.2020.58.11.752
516 Jae-Won Lee, Sung-Jin Kim, Min-Suk Oh Influence of Alloy Content on Microstructure and Corrosion Resistance of Zn-based Alloy Coated Steel Product 2020 58 3 169 10.3365/KJMM.2020.58.3.169 Moon-Hi Hong, In-kyu Kim, Hye-Jeong Yun Effect of Inorganic Filler Addition on Non-Combustible and Mechanical Properties of Color Coated Steel Sheets Korean Journal of Metals and Materials 2020 58 11 768 10.3365/KJMM.2020.58.11.768
517 Moon-Hi Hong, Deok-Gu Kang, Doo-Jin Paik, Hyeon-Seok Hwang, Sung-ho Park Effect of Added Magneisum on the Coating Properties of Galvanized Steel Sheets 2016 54 10 723 10.3365/KJMM.2016.54.10.723 Moon-Hi Hong, In-kyu Kim, Hye-Jeong Yun Effect of Inorganic Filler Addition on Non-Combustible and Mechanical Properties of Color Coated Steel Sheets Korean Journal of Metals and Materials 2020 58 11 768 10.3365/KJMM.2020.58.11.768
518 Seong-Eun Kim, Se-Hoon Oh, In-Jin Shon Mechanical Properties and Fabrication of a Nanostructured Nb-Al2O3 Composite by High Frequency Induction Heating 2019 57 11 701 10.3365/KJMM.2019.57.11.701 Seong-Eun Kim, In-Jin Shon Rapid Sintering and Synthesis of Nanocrystalline Ta-ZrO2 Composite Korean Journal of Metals and Materials 2020 58 11 776 10.3365/KJMM.2020.58.11.776
519 Dohyoung Kim, Yonghwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yongho Park Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys 2020 58 10 660 10.3365/KJMM.2020.58.10.660 Jaehoon Joo, Minjoo Kang, Dongmin Shin, Eunhye Seo, Dohyung Kim, Yeongmo Yeon, Kinam Hong, Wookjin Lee, Junghoon Lee Corrosion Resistance of Shape Recoverable Fe-17Mn-5Si-5Cr Alloy in Concrete Structures Materials 2020 13 23 5531 10.3390/ma13235531
520 Dooho Choi Potential of Ruthenium and Cobalt as Next-generation Semiconductor Interconnects 2018 56 8 605 10.3365/KJMM.2018.56.8.605 Jungkyu Kang, Minjae Sung, Jinuk Byun, Oh Joong Kwon, Jae Jeong Kim Superconformal Cobalt Electrodeposition with a Hydrogen Evolution Reaction Suppressing Additive Journal of The Electrochemical Society 2020 167 16 162514 10.1149/1945-7111/abd3b9
521 Cheol-Woo Kim, Young-Chan Kim, Jung-Han Kim, Jae-Ik Cho, Min-Suk Oh Effect of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting 2018 56 11 805 10.3365/KJMM.2018.56.11.805 Ho Sung Jang, Ho Jung Kang, Jin Young Park, Yoon Suk Choi, Sunmi Shin Effects of Casting Conditions for Reduced Pressure Test on Melt Quality of Al-Si Alloy Metals 2020 10 11 1422 10.3390/met10111422
522 Min-su Lee, Jong Bae Jeon, Tea-Sung Jun Investigation of Local Deformation Behaviour of Metallic Materials and Recent Research Trends: A Review 2018 56 9 635 10.3365/KJMM.2018.56.9.635 Min-Su Lee, Min-Ki Ji, Yong-Taek Hyun, Eun-Young Kim, Tea-Sung Jun Effect of texture and temperature gradient on anisotropic plastic deformation of commercially pure titanium at room and low temperatures Materials Characterization 2021 172 110834 10.1016/j.matchar.2020.110834
523 Ji-Goo Heo, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim Effect of Pre-Aging Treatment on Bake-Hardenability of Al-8.0Zn-2.5Mg-2.0Cu Alloy Sheet Fabricated by Twin-Roll Casting Process 2019 57 6 396 10.3365/KJMM.2019.57.6.396 Sang-Hwa Lee, Jae-Gil Jung, Sung-Il Baik, David N. Seidman, Min-Seok Kim, Young-Kook Lee, Kwangjun Euh Precipitation strengthening in naturally aged Al–Zn–Mg–Cu alloy Materials Science and Engineering: A 2021 803 140719 10.1016/j.msea.2020.140719
524 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Hesamoddin Gorzin, Ahad Ghaemi, Alireza Hemmati, Ali Maleki Studies on effective interaction parameters in extraction of Pr and Nd using Aliquat 336 from NdFeB magnet-leaching solution: Multiple response optimizations by desirability function Journal of Molecular Liquids 2021 324 115123 10.1016/j.molliq.2020.115123
525 Hee-keun Lee Analysis of White Spots Formation on Autogeneous TIG Welds of Cryogenic Fe-36%Ni Steels 2019 57 12 771 10.3365/KJMM.2019.57.12.771 Guanghui Yi, Dajiang Zheng, Guang-Ling Song Surface white spot and pitting corrosion of 316 L stainless steel Anti-Corrosion Methods and Materials 2020 68 1 1 10.1108/ACMM-10-2020-2383
526 Hee-Ju Kim, Jeki Jung, Su-Hyeon Kim, Cha-Yong Lim, Yoon Suk Choi Effect of Heat Treatment on Mechanical Properties and Energy Absorption Capacity of 7003 Aluminum Alloy 2020 58 1 7 10.3365/KJMM.2020.58.1.7 Ho Sung Jang, Ho Jung Kang, Jin Young Park, Yoon Suk Choi, Sunmi Shin Effects of Casting Conditions for Reduced Pressure Test on Melt Quality of Al-Si Alloy Metals 2020 10 11 1422 10.3390/met10111422
527 Dongyoon Shin, Hyun-Woo Shim, Basudev Swain, Kyung-Soo Park, Chan-Gi Lee Facile Synthesis of Single-Phase Alpha-Tungsten Nanopowders from Ammonium Paratungstate by RF Induction Thermal Plasma and Thermochemical Reduction 2020 58 11 798 10.3365/KJMM.2020.58.11.798 Tuan Van Nguyen, Kim Anh Huynh, Quyet Van Le, Hayeong Kim, Sang Hyun Ahn, Soo Young Kim Highly stable electrochromic cells based on amorphous tungsten oxides prepared using a solution‐annealing process International Journal of Energy Research 2021 45 5 8061 10.1002/er.6354
528 Dong Min Cho, Jin-seong Park, Jin Woo Lee, Sung Jin Kim Study on Hydrogen Diffusion and Sulfide Stress Cracking Behaviors of Simulated Heat-Affected Zone of A516-65 Grade Pressure Vessel Carbon Steel 2020 58 9 599 10.3365/KJMM.2020.58.9.599 Hanji Park, Cheolho Park, Junghoon Lee, Namhyun Kang, Stephen Liu Influence of hydrogen on softened heat-affected zones during in-situ slow strain rate testing in advanced high-strength steel welds Corrosion Science 2021 181 109229 10.1016/j.corsci.2020.109229
529 Junhee Hahn, Xiao Xiao, Dong Bok Lee Oxidation of Ni-Cr-Co-Al-Mo-Ti-Re-Ta-W-Ru Single Crystals at 1000 oC in Air 2020 58 4 234 10.3365/KJMM.2020.58.4.234 Ha Huu Do, Quyet Van Le, Tuan Van Nguyen, Kim Anh Huynh, Mahider Asmare Tekalgne, Vy Anh Tran, Tae Hyung Lee, Jin Hyuk Cho, Mohammadreza Shokouhimehr, Sang Hyun Ahn, Ho Won Jang, Soo Young Kim Synthesis of MoS x /Ni‐metal‐organic framework‐74 composites as efficient electrocatalysts for hydrogen evolution reactions International Journal of Energy Research 2021 10.1002/er.6385
530 Junhee Hahn, Xiao Xiao, Dong Bok Lee Oxidation of Ni-Cr-Co-Al-Mo-Ti-Re-Ta-W-Ru Single Crystals at 1000 oC in Air 2020 58 4 234 10.3365/KJMM.2020.58.4.234 Tuan Van Nguyen, Kim Anh Huynh, Quyet Van Le, Hayeong Kim, Sang Hyun Ahn, Soo Young Kim Highly stable electrochromic cells based on amorphous tungsten oxides prepared using a solution‐annealing process International Journal of Energy Research 2021 45 5 8061 10.1002/er.6354
531 Sol-Bin Park, In-Jae Lee, Il-Ho Kim Thermoelectric Properties of Ge-doped Higher Manganese Silicides MnSi1.72-1.73:Gem 2018 56 9 693 10.3365/KJMM.2018.56.9.693 M. S. Likhanov, A. V. Shevelkov Intermetallic compounds with non-metallic properties Russian Chemical Bulletin 2020 69 12 2231 10.1007/s11172-020-3047-5
532 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Viet Nhan Hoa Nguyen, Man Seung Lee Separation of Co(II), Ni(II), Mn(II) and Li(I) from synthetic sulfuric acid leaching solution of spent lithium ion batteries by solvent extraction Journal of Chemical Technology & Biotechnology 2021 96 5 1205 10.1002/jctb.6632
533 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Viet Nhan Hoa Nguyen, Minh Nhan Le, Man Seung Lee Comparison of Extraction Ability between a Mixture of Alamine 336/Aliquat 336 and D2EHPA and Ionic Liquid ALi-D2 from Weak Hydrochloric Acid Solution Metals 2020 10 12 1678 10.3390/met10121678
534 Jae-Won Kim, Siva Prasad Murugan, Nam Hyun Kang, Yeong-Do Park Study on the Effect of the Localized Electrode Degradation on Weldability During an Electrode Life Test in Resistance Spot Welding of Ultra-High Strength Steel 2019 57 11 715 10.3365/KJMM.2019.57.11.715 Kaisar Mahmud, Siva Prasad Murugan, Yongjin Cho, Changwook Ji, Daegun Nam, Yeong-Do Park Geometrical degradation of electrode and liquid metal embrittlement cracking in resistance spot welding Journal of Manufacturing Processes 2021 61 334 10.1016/j.jmapro.2020.11.025
535 Sang-Jun Jeong, In-Kyu Hwang, In-Sung Cho, Hee-Soo Kim Estimation of Chemical Composition of Al-Si Cast Alloys Using Image Recognition 2019 57 3 184 10.3365/KJMM.2019.57.3.184 Hee-Soo Kim, Si-Jun Park, Seong-Moon Seo, Young-Soo Yoo, Hi-Won Jeong, HeeJin Jang Regression analysis of high-temperature oxidation of Ni-based superalloys using artificial neural network Corrosion Science 2021 180 109207 10.1016/j.corsci.2020.109207
536 Thi Thuy Nhi Nguyen, Man Seung Lee Improvement of Alumina Dissolution from the Mechanically Activated Dross Using Ultrasound-Assisted Leaching 2019 57 3 154 10.3365/KJMM.2019.57.3.154 Hanlin Shen, Bo Liu, Christian Ekberg, Shengen Zhang Harmless disposal and resource utilization for secondary aluminum dross: A review Science of The Total Environment 2021 760 143968 10.1016/j.scitotenv.2020.143968
537 Kijung Park, Dae Hyun Cho, Min-Ho Park, Cheol-Woong Yang Effects of Molybdenum on HIC Susceptibility in Normalized Pressure Vessel Steels for Sour Service Applications 2019 57 7 405 10.3365/KJMM.2019.57.7.405 Hanji Park, Cheolho Park, Junghoon Lee, Namhyun Kang, Stephen Liu Influence of hydrogen on softened heat-affected zones during in-situ slow strain rate testing in advanced high-strength steel welds Corrosion Science 2021 181 109229 10.1016/j.corsci.2020.109229
538 Thanh Tuan Tran, Man Seung Lee Interactions Between Ionic Liquid (ALiCY) and TBP and their Use in Hydrometallurgy for Extracting Co(II) and Ni(II) 2020 58 6 423 10.3365/KJMM.2020.58.6.423 Viet Nhan Hoa Nguyen, Man Seung Lee Separation of Co(II), Ni(II), Mn(II) and Li(I) from synthetic sulfuric acid leaching solution of spent lithium ion batteries by solvent extraction Journal of Chemical Technology & Biotechnology 2021 96 5 1205 10.1002/jctb.6632
539 Jang Sik Park, Jin Ok Joo Evolution of High Tin Bronze Technology in Korea as Observed in Bronze Objects of the Unified Silla Period, Excavated from the National Gyongju Museum Site 2016 54 12 937 10.3365/KJMM.2016.54.12.937 Pranay Kumar Sarkar, Sashindra Kumar Kakoty Effect of quenching parameters on mechanical properties of bell metal Materials Today: Proceedings 2020 10.1016/j.matpr.2020.10.529
540 Sung Min Park, Myeong Je Jang, Yoo Sei Park, Jooyoung Lee, Jae-yeop Jeong, Jaehoon Jung, Min-Kwan Choi, Yu-Seong Noh, Min-Ho Seo, Hyung Ju Kim, Juchan Yang, Yang Do Kim, Sung Mook Choi Synthesis and Characterization of the Cu0.72Co2.28O4 Catalyst for Oxygen Evolution Reaction in an Anion Exchange Membrane Water Electrolyzer 2020 58 1 49 10.3365/KJMM.2020.58.1.49 Ha Huu Do, Quyet Van Le, Tuan Van Nguyen, Kim Anh Huynh, Mahider Asmare Tekalgne, Vy Anh Tran, Tae Hyung Lee, Jin Hyuk Cho, Mohammadreza Shokouhimehr, Sang Hyun Ahn, Ho Won Jang, Soo Young Kim Synthesis of MoS x /Ni‐metal‐organic framework‐74 composites as efficient electrocatalysts for hydrogen evolution reactions International Journal of Energy Research 2021 10.1002/er.6385
541 Junghoon Lee, Myeonghyun Kim, Yeongdo Park, Cheolho Park, Cheolhee Kim, Namhyun Kang Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel 2019 57 8 491 10.3365/KJMM.2019.57.8.491 Hanji Park, Cheolho Park, Junghoon Lee, Namhyun Kang, Stephen Liu Influence of hydrogen on softened heat-affected zones during in-situ slow strain rate testing in advanced high-strength steel welds Corrosion Science 2021 181 109229 10.1016/j.corsci.2020.109229
542 Ashutosh Sharma, Byungmin Ahn Effect of MgO Addition on the Monoclinic to Tetragonal Transition of ZrO2 Fabricated by High Energy Ball Milling 2018 56 10 718 10.3365/KJMM.2018.56.10.718 Arife Yurdakul Production and Characterization of Ceramic Bushings from Alumina-Toughened Yttrium-Stabilized Tetragonal Zirconia Composites for Projection Welding Applications Arabian Journal for Science and Engineering 2021 46 3 2579 10.1007/s13369-020-05160-8
543 Yo-Han Ryu, Sung-Soo Kim Design and Fabrication of Metamaterial Absorbers Used for RF-ID 2020 58 2 131 10.3365/KJMM.2020.58.2.131 Houdi Xiao, Ruiru Qin, Mingyun Lv, Chuanzhi Wang Highly Transparent Broadband and Polarization-Insensitive Absorber Based on Metasurface Applied Sciences 2020 10 24 9125 10.3390/app10249125
544 Tae Chang Park, Beom Seok Kim, Tae Young Kim, Il Bong Jin, Yeong Koo Yeo Comparative Study of Estimation Methods of the Endpoint Temperature in Basic Oxygen Furnace Steelmaking Process with Selection of Input Parameters 2018 56 11 813 10.3365/KJMM.2018.56.11.813 Liangjun Feng, Chunhui Zhao, Yuanlong Li, Min Zhou, Honglin Qiao, Chuan Fu Multichannel Diffusion Graph Convolutional Network for the Prediction of Endpoint Composition in the Converter Steelmaking Process IEEE Transactions on Instrumentation and Measureme 2021 70 1 10.1109/TIM.2020.3037953
545 Jioh Shin, Ashutosh Sharma, Do-hyun Jung, Jae Pil Jung Effect of Sn Content on Filler and Bonding Characteristics of Active Metal Brazed Cu/Al2O3 Joint 2018 56 5 366 10.3365/KJMM.2018.56.5.366 Jaebong Yeon, Michiru Yamamoto, Peiyuan Ni, Masashi Nakamoto, Toshihiro Tanaka Joining of Metal to Ceramic Plate Using Super-Spread Wetting Metals 2020 10 10 1377 10.3390/met10101377
546 Ju-Hun Kim, Jeong-Han Lee, Junho Jang, Ik-Hyun Oh, Sung-Kil Hong, Hyun Kuk Park Property Evaluation of Tungsten-Carbide Hard Materials as a Function of Fe Contents 2020 58 8 533 10.3365/KJMM.2020.58.8.533 Tuan Van Nguyen, Kim Anh Huynh, Quyet Van Le, Hayeong Kim, Sang Hyun Ahn, Soo Young Kim Highly stable electrochromic cells based on amorphous tungsten oxides prepared using a solution‐annealing process International Journal of Energy Research 2021 45 5 8061 10.1002/er.6354
547 Gi-Su Ham, Yeon-Ji Kang, Hyung-Jun Kim, Sang-Hoon Yoon, Kee-Ahn Lee Effect of Cr Electroplating Layer Thickness on the Tensile and High Cycle Fatigue Properties of AISI 1045 Steel 2019 57 3 138 10.3365/KJMM.2019.57.3.138 Young-Kyun Kim, Kee-Ahn Lee Tensile and Compressive Deformation Behaviors of High-Strength Cu Bulk Material Manufactured by Cold Spray Korean Journal of Metals and Materials 2020 58 11 759 10.3365/KJMM.2020.58.11.759
548 Sang Won Lee, Sang-Hoon Kim, Sung Hyuk Park Tensile Properties at Room and Elevated Temperatures and High-Cycle Fatigue Properties of Extruded AZ80 and TAZ711 Alloys 2018 56 10 699 10.3365/KJMM.2018.56.10.699 Hyoung-Seo Son, Young-Gon Kim, Jin-Jae Kim, Young-Suk Kim Development of a Novel Plastic Hardening Model Based on Random Tree Growth Method Korean Journal of Metals and Materials 2020 58 11 741 10.3365/KJMM.2020.58.11.741
549 Jae Il Kim, Kwang Sun Hwang Effect of Annealing Temperature on the Shape Memory Properties of Ti-44.5Ni-5Cu and Ti-45.2Ni-5Cu(at%) Alloys 2019 57 9 562 10.3365/KJMM.2019.57.9.562 Jaehoon Joo, Minjoo Kang, Dongmin Shin, Eunhye Seo, Dohyung Kim, Yeongmo Yeon, Kinam Hong, Wookjin Lee, Junghoon Lee Corrosion Resistance of Shape Recoverable Fe-17Mn-5Si-5Cr Alloy in Concrete Structures Materials 2020 13 23 5531 10.3390/ma13235531
550 Changsoo Lee, Kihoon Bang, Doosun Hong, Hyuck Mo Lee Recent Progress in First Principle Calculation and High-Throughput Screening of Electrocatalysts: A Review 2019 57 1 1 10.3365/KJMM.2019.57.1.1 Ha Huu Do, Quyet Van Le, Tuan Van Nguyen, Kim Anh Huynh, Mahider Asmare Tekalgne, Vy Anh Tran, Tae Hyung Lee, Jin Hyuk Cho, Mohammadreza Shokouhimehr, Sang Hyun Ahn, Ho Won Jang, Soo Young Kim Synthesis of MoS x /Ni‐metal‐organic framework‐74 composites as efficient electrocatalysts for hydrogen evolution reactions International Journal of Energy Research 2021 10.1002/er.6385
551 Yeun-Ah Joo, Young-Kyun Kim, Tae-Sik Yoon, Kee-Ahn Lee Microstructure and Mechanical Properties of 17-4PH Steel and Fe-Cr-B Alloy Mixed Material Manufactured Using Powder Injection Molding 2018 56 5 342 10.3365/KJMM.2018.56.5.342 Young-Kyun Kim, Kee-Ahn Lee Tensile and Compressive Deformation Behaviors of High-Strength Cu Bulk Material Manufactured by Cold Spray Korean Journal of Metals and Materials 2020 58 11 759 10.3365/KJMM.2020.58.11.759
552 Woo-Jin Cho, Se-Hoon Oh, In-Jin Shon Effect of BN Addition on the Mechanical Properties of AlN 2019 57 5 310 10.3365/KJMM.2019.57.5.310 Seong-Eun Kim, In-Jin Shon Rapid Sintering and Synthesis of Nanocrystalline Ta-ZrO2 Composite Korean Journal of Metals and Materials 2020 58 11 776 10.3365/KJMM.2020.58.11.776
553 Cheol Woo Park, Jun Hyeong In, Jae Hwa Park, Kwang Bo Shim, Jeong Ho Ryu Up- and Downconversion Luminescence in Ho3+,Yb3+-Co-Doped Y2O3 Transparent Ceramics Prepared by Spark Plasma Sintering 2019 57 9 609 10.3365/KJMM.2019.57.9.609 Yuxin Pan, Hui Lin, Jian Liu, Xiaodong Xu, Ruijin Hong, Chunxian Tao, Zhaoxia Han, Dawei Zhang Fabrication and spectral properties of Yb,Ho:Y2O3 transparent ceramics Optical Materials 2021 112 110479 10.1016/j.optmat.2020.110479
554 Junhee Hahn, Sang Whan Park, Dong Bok Lee Long-time Oxidation of Ti3(Al,Si)C2 Carbides at 400-800 oC 2020 58 3 182 10.3365/KJMM.2020.58.3.182 D.G. Krotkevich, E.B. Kashkarov, M.S. Syrtanov, T.L. Murashkina, A.M. Lider, S. Schmiedeke, N. Travitzky Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering Ceramics International 2021 47 9 12221 10.1016/j.ceramint.2021.01.070
555 Junhee Hahn, Sang Whan Park, Dong Bok Lee Long-time Oxidation of Ti3(Al,Si)C2 Carbides at 400-800 oC 2020 58 3 182 10.3365/KJMM.2020.58.3.182 E.B. Kashkarov, N.S. Pushilina, M.S. Syrtanov, D.G. Krotkevich, I. Gotman, N. Travitzky Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering Scripta Materialia 2021 194 113696 10.1016/j.scriptamat.2020.113696
556 Soo-Bae Kim, Young-Hee Cho, Jung-Moo Lee, Jae-Gil Jung, Su Gun Lim The Effect of Ultrasonic Melt Treatment on the Microstructure and Mechanical Properties of Al-7Si-0.35Mg Casting Alloys 2017 55 4 240 10.3365/KJMM.2017.55.4.240 Bum Youl Park, Youngkun Kim, Kihyung Lee Optimization Studies of AC4CH Material in the Cylinder Block of a Diesel Engine Application Processes 2020 9 1 70 10.3390/pr9010070
557 Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel 2018 56 5 375 10.3365/KJMM.2018.56.5.375 Han-sang Lee, Hee-sun Kim, Myung-soo Park, Bum-shin Kim, Jong-min Lee Welding Process Improvement of 347H Stainless Steel Boiler Tube for Mitigating Reheat Cracking Journal of Welding and Joining 2020 38 6 551 10.5781/JWJ.2020.38.6.5
558 Sang Kyu Park, Ho Jung Lee, Jong Hyeon Lee Effects of Thermal Aging Induced Microstructure Evolution on Mechanical and Corrosion Properties of Delta-Ferrite in Austenitic Stainless Steel Weld 2018 56 4 296 10.3365/KJMM.2018.56.4.296 Han-sang Lee, Hee-sun Kim, Myung-soo Park, Bum-shin Kim, Jong-min Lee Welding Process Improvement of 347H Stainless Steel Boiler Tube for Mitigating Reheat Cracking Journal of Welding and Joining 2020 38 6 551 10.5781/JWJ.2020.38.6.5
559 CheolMin Kwon, Gil-Geun Lee, Gook-Hyun Ha Carbothermal Reduction of Oxide of WC/Co Hardmetal Scrap 2016 54 10 743 10.3365/KJMM.2016.54.10.743 So Yeong Byun, Jong Sun Park, Jong Hyeok Kang, Sangyun Seo, Tam Tran, Myong Jun Kim Recovery of tungsten and cobalt from cemented tungsten carbide wastes using carbonate roasting and water leaching Journal of the Air & Waste Management Association 2021 1 10.1080/10962247.2021.1876780
560 Hyun Jun Kwon, Ka Ram Lim, Yong Tae Lee, Dong Geun Lee, Jun Hee Lee, Seung Eon Kim Effect of Aging Time and Temperature on Microstructure and Mechanical Properties of Ti-39Nb-6Zr Alloy 2016 54 12 925 10.3365/KJMM.2016.54.12.925 Yu-Jin Hwang, Young-Sin Choi, Yun-Ho Hwang, Hyun-Wook Cho, Dong-Geun Lee Biocompatibility and Biological Corrosion Resistance of Ti–39Nb–6Zr+0.45Al Implant Alloy Journal of Functional Biomaterials 2020 12 1 2 10.3390/jfb12010002
561 Seung-Yeon Yoo, Hyun Gyoon Park Effect of Anodic Oxidation Process Parameters on TiO2 Nanotube Formation in Ti-6Al-4V Alloys 2019 57 8 521 10.3365/KJMM.2019.57.8.521 Xiaojiang Nie, Siqi Yin, Wenchao Duan, Zilong Zhao, Liang Li, Zhiqiang Zhang Recent Progress in Anodic Oxidation of TiO2 Nanotubes and Enhanced Photocatalytic Performance: A Short Review Nano 2021 16 01 2130002 10.1142/S1793292021300024
562 Hye Ryoung Park, Young Jun Kwak, Seong Ho Lee, Myoung Youp Song Hydrogen Sorption of Pure Mg and Niobium (V) Fluoride-Added Mg Alloys Prepared by Planetary Ball Milling in Hydrogen 2016 54 12 916 10.3365/KJMM.2016.54.12.916 Devina Rattan Paul, Rishabh Sharma, Anshu Sharma, Priyanka Panchal, Anita Singh, Sudesh Chaudhary, S.P. Nehra Structural properties of Mg - x wt% Co (x = 0, 5, 10 & 20) nanocomposites for hydrogen storage applications Materials Today: Proceedings 2020 10.1016/j.matpr.2020.09.577
563 Yiseul Kim, Jeehye Kwon, Dayoung Yoo, Sungkyu Park, Dajeong Lee, Dongyun Lee Influence of Nickel Thickness and Annealing Time on the Mechanical Properties of Intermetallic Compounds Formed between Cu-Sn Solder and Substrate 2017 55 3 165 10.3365/KJMM.2017.55.3.165 Gyuwon Jeong, Dong-Yurl Yu, Seongju Baek, Junghwan Bang, Tae-Ik Lee, Seung-Boo Jung, JungSoo Kim, Yong-Ho Ko Interfacial Reactions and Mechanical Properties of Sn–58Bi Solder Joints with Ag Nanoparticles Prepared Using Ultra-Fast Laser Bonding Materials 2021 14 2 335 10.3390/ma14020335
564 Heesoo Choi, Sumin Kim, Hyokyung Sung, Sung-Joon Kim, Sangshik Kim Effect of Cr and N on Stress Corrosion Cracking Behavior of Fe-18Mn Steel 2019 57 10 624 10.3365/KJMM.2019.57.10.624 David M. Bastidas, Jacob Ress, Juan Bosch, Ulises Martin Corrosion Mechanisms of High-Mn Twinning-Induced Plasticity (TWIP) Steels: A Critical Review Metals 2021 11 2 287 10.3390/met11020287
565 Young-Jun Song Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process 2018 56 10 755 10.3365/KJMM.2018.56.10.755 Dongseok Lee, Sung-Ho Joo, Dong Ju Shin, Shun Myung Shin Evaluation of leaching characteristic and kinetic study of lithium from lithium aluminum silicate glass-ceramics by NaOH Journal of Environmental Sciences 2021 107 98 10.1016/j.jes.2021.02.001
566 Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars 2016 54 12 862 10.3365/KJMM.2016.54.12.862 Shuai-Feng Chen, Kaushik Bandyopadhyay, Shamik Basak, Byoungchul Hwang, Jae-Hyeok Shim, Joonho Lee, Myoung-Gyu Lee Predictive integrated numerical approach for modeling spatio-temporal microstructure evolutions and grain size dependent phase transformations in steels International Journal of Plasticity 2021 102952 10.1016/j.ijplas.2021.102952
567 Sang-Jun Jeong, In-Kyu Hwang, In-Sung Cho, Hee-Soo Kim Estimation of Chemical Composition of Al-Si Cast Alloys Using Image Recognition 2019 57 3 184 10.3365/KJMM.2019.57.3.184 Jun Hu, Ensheng Liu, Jiayu Yu, Sang-Bing Tsai Application of Structural Deformation Monitoring Based on Close-Range Photogrammetry Technology Advances in Civil Engineering 2021 2021 1 10.1155/2021/6621440
568 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 2019 57 3 176 10.3365/KJMM.2019.57.3.176 Quanhui Hou, Xinglin Yang, Jiaqi Zhang Review on Hydrogen Storage Performance of MgH 2 : Development and Trends ChemistrySelect 2021 6 7 1589 10.1002/slct.202004476
569 Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong Characterization of Microstructures and Creep Fracture Characteristics of Dissimilar Metal Welds between Inconel 740H Ni-Based Superalloy and Gr.92 Ferritic Steel 2018 56 5 375 10.3365/KJMM.2018.56.5.375 Yu Sik Kong, Muralimohan Cheepu, Jin-Kyung Lee Evaluation of the mechanical properties of Inconel 718 to SCM 440 dissimilar friction welding through real-time monitoring of the acoustic emission system Proceedings of the Institution of Mechanical Engin 2021 146442072199383 10.1177/1464420721993838
570 Heesoo Choi, Sumin Kim, Hyokyung Sung, Sung-Joon Kim, Sangshik Kim Effect of Cr and N on Stress Corrosion Cracking Behavior of Fe-18Mn Steel 2019 57 10 624 10.3365/KJMM.2019.57.10.624 Jin-Young Lee, Jin-Sung Hong, Seok-Hyeon Kang, Young-Kook Lee The effect of austenite grain size on deformation mechanism of Fe–17Mn steel Materials Science and Engineering: A 2021 809 140972 10.1016/j.msea.2021.140972
571 Kyeongsik Ha, Young Keun Park, Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, Wookjin Lee Effects of Heat Treatment Condition and Counter Materials on the Wear Behavior of Laser Direct Energy Deposited Fe-8Cr-3V-2Mo-2W Alloy 2020 58 10 680 10.3365/KJMM.2020.58.10.680 Junyeop Lee, Ye-eun Jeong, Do-sik Shim, Eunkyung Lee Microstructural evolution and martensitic transformation in FeCrV alloy fabricated via additive manufacturing Materials Science and Engineering: A 2021 809 140943 10.1016/j.msea.2021.140943
572 Dohyoung Kim, Yonghwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yongho Park Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys 2020 58 10 660 10.3365/KJMM.2020.58.10.660 Jin-Young Lee, Jin-Sung Hong, Seok-Hyeon Kang, Young-Kook Lee The effect of austenite grain size on deformation mechanism of Fe–17Mn steel Materials Science and Engineering: A 2021 809 140972 10.1016/j.msea.2021.140972
573 Yang Liu, Ho Seok Jeon, Man Seung Lee Solvent Extraction of Pr and Nd from Chloride Solution by Mixtures of Acidic Extractants and LIX 63 2016 54 8 592 10.3365/KJMM.2016.54.8.592 Raja Norimie Raja Sulaiman, Norul Fatiha Mohd Noah, Norasikin Othman, Norela Jusoh, Muhammad Bukhari Rosly Synergetic formulation of Cyanex 272/Cyanex 302 for hexavalent chromium removal from electroplating wastewater Korean Journal of Chemical Engineering 2021 38 3 514 10.1007/s11814-020-0702-3
574 Kang-Hyung Kim, Chan-Hyun Jung, Dae-Yong Jeong, Soong-Keun Hyun Causes and Measures of Fume in Directed Energy Deposition: A Review 2020 58 6 383 10.3365/KJMM.2020.58.6.383 Kang-Hyung Kim, Chan-Hyun Jung, Dae-Yong Jeong, Soong-Keun Hyun Preventing Evaporation Products for High-Quality Metal Film in Directed Energy Deposition: A Review Metals 2021 11 2 353 10.3390/met11020353
575 Sung-Gyu Kwak, Go-Eun Lee, Il-Ho Kim Electronic Transport and Thermoelectric Properties of Cu12-xZnxSb4S13 Tetrahedrites Prepared by Mechanical Alloying and Hot Pressing 2019 57 5 328 10.3365/KJMM.2019.57.5.328 Go-Eun Lee, Il-Ho Kim Thermoelectric and Transport Properties of Permingeatite Cu3SbSe4 Prepared Using Mechanical Alloying and Hot Pressing Materials 2021 14 5 1116 10.3390/ma14051116
576 Hyun Jun Cho, Hyun-Sik Kim, Sang-Il Kim Effect of Cu/In Doping on the Thermoelectric Transport Properties of Bi-Sb-Te Alloys 2019 57 10 673 10.3365/KJMM.2019.57.10.673 Ji Hoon Jeon, Dong Ho Kim, Seokown Hong, Weon Ho Shin, Nguyen Van Du, Hyun-Sik Kim, TaeWan Kim, Sang-il Kim Thermoelectric Properties of Te-doped In0.9Si0.1Se with Enhanced Effective Mass Electronic Materials Letters 2021 10.1007/s13391-021-00278-9
577 Seung-Yeon Yoo, Hyun Gyoon Park Effect of Anodic Oxidation Process Parameters on TiO2 Nanotube Formation in Ti-6Al-4V Alloys 2019 57 8 521 10.3365/KJMM.2019.57.8.521 Sung-Hee Kim, Chanyoung Jeong Feasibility of Machine Learning Algorithms for Predicting the Deformation of Anodic Titanium Films by Modulating Anodization Processes Materials 2021 14 5 1089 10.3390/ma14051089
578 Ye-Eun Cha, Il-Ho Kim Synthesis and Thermoelectric Properties of Partially Double-Filled Skutterudites (La1−zYbz)0.8Fe4−xCoxSb12 2019 57 12 801 10.3365/KJMM.2019.57.12.801 Go-Eun Lee, Il-Ho Kim Thermoelectric and Transport Properties of Permingeatite Cu3SbSe4 Prepared Using Mechanical Alloying and Hot Pressing Materials 2021 14 5 1116 10.3390/ma14051116
579 Min Kyeong Jang, Nam Chul Cho A Study on the Corrosion and Microstructure Characteristics of Early Iron Age Bronze Swords Excavated from Sinpung Site in Wanju, Jeollabuk-Do, Republic of Korea 2020 58 7 472 10.3365/KJMM.2020.58.7.472 Nam Chul Cho, Min Kyeong Jang, Il Kwon Huh A Study on the Microstructure and Corrosion Characteristics of Early Iron Age Bronze Mirrors Excavated from the Korean Peninsula Applied Sciences 2021 11 5 2441 10.3390/app11052441
580 Myoung Youp Song, Young Jun Kwak Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2 2019 57 3 176 10.3365/KJMM.2019.57.3.176 Myoung Youp Song, Young Jun Kwak Hydrogen charging kinetics of Mg - 10wt% Fe2O3 prepared via MgH2-forming mechanical milling Materials Research Bulletin 2021 140 111304 10.1016/j.materresbull.2021.111304
581 Thi Hong Nguyen, Lingyun Wang, Man Seung Lee Separation and Recovery of Precious Metals from Leach Liquors of Spent Electronic Wastes by Solvent Extraction 2017 55 4 247 10.3365/KJMM.2017.55.4.247 Gautam Mishra, Rohit Jha, Mudila Dhanunjaya Rao, Arunabh Meshram, Kamalesh K. Singh Recovery of silver from waste printed circuit boards (WPCBs) through hydrometallurgical route: A review Environmental Challenges 2021 4 100073 10.1016/j.envc.2021.100073
582 Hyun-Uk Jun, Jae-Hun Kim, Jae Won Kim, Eun-Kyung Lee, Yang-Do Kim, Changwook Ji Effect of Electrode Patterning on Melting Behavior and Electrode Degradation in Resistance Spot Welding of A6014-T4 Alloy 2020 58 12 863 10.3365/KJMM.2020.58.12.863 Hyun-Uk Jun, Jae Won Kim, Jae-Hun Kim, Kwang-Weon Lee, Jooyong Cheon, Changwook Ji Comparison of Weldability Misalignment between Rivets and Electrodes in Aluminum/Steel Resistance Element Welding Journal of Welding and Joining 2021 39 1 51 10.5781/JWJ.2021.39.1.6
583 Jae-Deuk Kim, Jae Won Kim, Joo Yong Cheon, Yang-Do Kim, Changwook Ji Effect of Shielding Gases on the Wire Arc Additive Manufacturability of 5 Cr – 4 Mo Tool Steel for Die Casting Mold Making 2020 58 12 852 10.3365/KJMM.2020.58.12.852 Jaewon Kim, Jaedeuk Kim, Jooyoung Cheon, Changwook Ji Effect of Filler Metal Type on Microstructure and Mechanical Properties of Fabricated NiAl Bronze Alloy Using Wire Arc Additive Manufacturing System Metals 2021 11 3 513 10.3390/met11030513
584 Eunho Choi, Young Jun Kwak, Myoung Youp Song Improvement of the Hydrogen-Release Features of Mg-Graphene Composite by Adding Nickel via Reactive Ball Milling 2019 57 10 663 10.3365/KJMM.2019.57.10.663 Myoung Youp Song, Young Jun Kwak Hydrogen charging kinetics of Mg - 10wt% Fe2O3 prepared via MgH2-forming mechanical milling Materials Research Bulletin 2021 140 111304 10.1016/j.materresbull.2021.111304
585 Young Hyun Oh, Hyun Jung Ryu, Taejung Kim, Minsu Choi, Taeseon Lee Mechanical Performance and Microstructure of Resistance Element Welds of Dissimilar Metals Created with a Headless Rivet 2019 57 11 708 10.3365/KJMM.2019.57.11.708 Hyun-Uk Jun, Jae Won Kim, Jae-Hun Kim, Kwang-Weon Lee, Jooyong Cheon, Changwook Ji Comparison of Weldability Misalignment between Rivets and Electrodes in Aluminum/Steel Resistance Element Welding Journal of Welding and Joining 2021 39 1 51 10.5781/JWJ.2021.39.1.6
586 Min-su Lee, Jong Bae Jeon, Tea-Sung Jun Investigation of Local Deformation Behaviour of Metallic Materials and Recent Research Trends: A Review 2018 56 9 635 10.3365/KJMM.2018.56.9.635 Conghui Zhang, Kun Hu, Min Zheng, Wenguang Zhu, Guodong Song Effect of surface nanocrystallization on fatigue properties of Ti–6Al–4V alloys with bimodal and lamellar structure Materials Science and Engineering: A 2021 813 141142 10.1016/j.msea.2021.141142
587 Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy 2018 56 1 40 10.3365/KJMM.2018.56.1.40 Gyo Myeong Lee, Jong Un Lee, Sung Hyuk Park Effects of post-heat treatment on microstructure, tensile properties, and bending properties of extruded AZ80 alloy Journal of Materials Research and Technology 2021 12 1039 10.1016/j.jmrt.2021.03.046
588 Jang Sik Park, Jin Ok Joo Evolution of High Tin Bronze Technology in Korea as Observed in Bronze Objects of the Unified Silla Period, Excavated from the National Gyongju Museum Site 2016 54 12 937 10.3365/KJMM.2016.54.12.937 P K Sarkar, S K Kakoty Bell Metal Product Manufacturing Techniques: A Technical Report from Sarthebari, Assam Journal of The Institution of Engineers (India): S 2021 10.1007/s40032-021-00673-z
589 Daehan Jang, Kwangyoon Kim, Hyoung Chan Kim, Jong Bae Jeon, Dae-Geun Nam, Keun Yong Sohn, Byung Jun Kim Evaluation of Mechanical Property for Welded Austenitic Stainless Steel 304 by Following Post Weld Heat Treatment 2017 55 9 664 10.3365/KJMM.2017.55.9.664 Azouaou Berkache, Jinyi Lee, Eunho Choe Evaluation of Cracks on the Welding of Austenitic Stainless Steel Using Experimental and Numerical Techniques Applied Sciences 2021 11 5 2182 10.3390/app11052182
590 Myong-Soo Lee, Kwon-Hoo Kim, Chang-Yong Kang Effect of Stress Magnitude on the Tensile Properties of Damaged Damping Alloy Under Fatigue Stress 2019 57 2 71 10.3365/KJMM.2019.57.2.71 Hak-Chul Kim, Ki-Sik Lee, Young-Joon Tak, Ki-Woo Nam, Byoung-Chul Choi Effect of Forming Method on Tensile Properties of Elbow Journal of Power System Engineering 2021 25 1 36 10.9726/kspse.2021.25.1.036
591 Dohyoung Kim, Yonghwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yongho Park Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys 2020 58 10 660 10.3365/KJMM.2020.58.10.660 Jin-Sung Hong, Seon-Min Choi, Young-Kook Lee Stasis mechanism of γ → ε martensitic transformation in Fe-17Mn alloy Acta Materialia 2021 210 116846 10.1016/j.actamat.2021.116846
592 Minh Nhan Le, Seong Ho Son, Man Seung Lee Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution 2019 57 3 162 10.3365/KJMM.2019.57.3.162 Thanh Tuan Tran, Hyun Seung Moon, Man Seung Lee Recovery of Cobalt, Nickel and Copper Compounds from UHT Processed Spent Lithium-ion Batteries by Hydrometallurgical Process Mineral Processing and Extractive Metallurgy Revie 2021 1 10.1080/08827508.2021.1910508