| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials > Volume 55(9); 2017 > Article
Korean Journal of Metals and Materials 2017;55(9): 632-636. doi: https://doi.org/10.3365/KJMM.2017.55.9.632
기계화학적 합성과 나노구조 CoZr-ZrO2 복합재료 소결
손인진1, 윤진국2, 홍경태2
1전북대학교 신소재공학부 수소연료전지 연구센터
2한국과학기술연구원
Sintering of a Nanostructured CoZr-ZrO2 Composite from Mechanochemically Synthesized Powders
In-Jin Shon1, Jin-Kook Yoon2, Kyung-Tae Hong2
1Division of Advanced Materials Engineering, the Research Center of Hydrogen Fuel Cell, Chonbuk National University, Jeonju 54896, Republic of Korea
2Materials Architecturing Reserch Center, Korea Institute of Science and Technology, Seoul 02792, Republic of Korea
Correspondence  In-Jin Shon ,Tel: +82-63-270-2381, Email: ijshon@chonbuk.ac.kr
Received: 18 January 2017;  Accepted: 18 February 2017.  Published online: 30 August 2017.
ABSTRACT
Since their development in the 1970s ZrO2 ceramics have been shown to be promising alternative materials for total hip arthroplasty (THA) and total knee arthroplasty (TKA). However, ZrO2 is so brittle that in vivo failure can result from fracture of the ceramic femoral head and fracture of the ceramic acetabular liner due to the low toughness of the ceramics. To improve its fracture toughness, the approach commonly utilized has been the addition of a second phase to form a composite and produce nanostructured materials. The purpose of this study was to produce a mechanical synthesis of CoZr and ZrO2 nanopowders from CoO and Zr powders, and fabricate dense nanocrystalline 2CoZr-ZrO2 composites within two minutes using this pulsed current activated sintering method. Their mechanical properties, biocompatibility and microstructure were then evaluated. Nanopowders of CoZr and ZrO2 were synthesized mechanochemically according to the reaction (2 CoO + 3 Zr → 2CoZr + ZrO2) from CoO and Zr powders by high-energy ball milling. The synthesized powders were consolidated by the pulsed current activated sintering method within two minutes under 80Mpa pressure. CoZr and ZrO2 composite was sintered by the rapid heating of the nanophase. The hardness and fracture toughness of the 2 CoZr-ZrO2 composite in this study were better than the hardness of monolithic CoZr and the fracture toughness of a monolithic ZrO2. Additionally, the 2 CoZr-ZrO2 composite exhibited good biocompatibility.
Keywords: sintering, composite, synthesis, mechanical properties, nanomaterials
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
  E-Mail
  Print
Share:      
METRICS
0
Crossref
1
Scopus
736
View
4
Download
Related article
Synthesis and Rapid Sintering of Nanocrystalline CoTi-ZrO2 Composite  2016 November;54(11)
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community