| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials > Volume 55(8); 2017 > Article
Korean Journal of Metals and Materials 2017;55(8): 566-571. doi: https://doi.org/10.3365/KJMM.2017.55.8.566
슬래그 연화 용융 거동에 미치는 첨가제 입도의 영향
오준석, 이재홍, 이준호
고려대학교 신소재공학과
Effect of Additive Size on the Softening and Melting Behavior of Slag
Joon Seok Oh, Jaehong Lee, Joonho Lee
Department of Materials Science and Engineering, Korea University, Seoul 02841, Republic of Korea
Correspondence  Joonho Lee ,Tel: +82-2-3290-3287, Email: joonholee@korea.ac.kr
Received: 8 December 2016;  Accepted: 2 March 2017.  Published online: 1 August 2017.
ABSTRACT
The Paris climate change agreement made a commitment to keep global warming below 2 ℃. The Korean government confirmed that it would seek a 37% reduction in CO2 emissions by 2030 from the Business As Usual level. CO2 emissions from Korean iron and steel industries account for approximately 15.4% of that reduction. Therefore, breakthrough technologies are urgently required to reduce the CO2 emitted from iron and steel making processes. A high efficiency iron making process is needed, because present methods consume huge amounts of energy. One of the key technologies for high efficiency iron making is more effective slag making. Understanding the effects of basic oxide additives such as lime and dolomite on the slag melting is required. In this study, the effects of additives (CaO and MgO) on the melting behavior the CaO-SiO2-Al2O3(-MgO) slag were investigated using a high temperature in-situ observation technique. For the CaO-SiO2-Al2O3 system, when the particle size of CaO was increased, slag melting was delayed. When 10 wt% of 1-2 mm diameter CaO or MgO was added, it was observed that the MgO addition delayed melting of the CaO-SiO2-Al2O3-MgO system. Accordingly to facilitate slag melting, finer additives are recommended. In addition, it was determined that lime was more useful for making molten slag than dolomite.
Keywords: in-situ observation, ironmaking process, melting, oxides, softening.
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI