Erratum to: Residual Stress Analysis of Additive Manufactured A356.2 Aluminum Alloys using X-Ray Diffraction Methods

Park, SangCheol; Kim, InYeong; Kim, Young Il; Kim, Dae-Kyeom; Oh, Soong Ju; Lee, Kee-Ahn; Lee, Bin

doi:2024.62.4.323

Korean Journal of Metals and Materials > Volume 62(4); 2024 > Article

Erratum to: X-선회절을통한적층제조 A356.2 알루미늄합금의잔류응력분석

Erratum

Korean Journal of Metals and Materials 2024; 62(4): 323-324.

Published online: March 29, 2024

DOI: http://dx.doi.org/10.3365/KJMM.2024.62.4.323

Erratum to: X-선회절을통한적층제조 A356.2 알루미늄합금의잔류응력분석

박상철^1,^2,^†, 김인영^1,^3,^†, 김영일¹, 김대겸¹, 오승주³, 이기안², 이빈^4,^*

¹한국생산기술연구원 한국희소금속산업기술센터

²인하대학교 신소재공학과

³고려대학교 신소재공학과

⁴경희대학교 정보전자신소재공학과

Erratum to: Residual Stress Analysis of Additive Manufactured A356.2 Aluminum Alloys using X-Ray Diffraction Methods

SangCheol Park^1,^2,^†, InYeong Kim^1,^3,^†, Young Il Kim¹, Dae-Kyeom Kim¹, Soong Ju Oh³, Kee-Ahn Lee², Bin Lee^4,^*

¹Korea Institute for Rare Metals, Korea Institute of Industrial Technology, Incheon 21655, Republic of Korea

²Department of Materials Science and Engineering, Inha University, Incheon 22212, Republic of Korea

³Department of Materials Science and Engineering, Korea University, Seoul 02841, Republic of Korea

⁴Department of Advanced Materials Engineering for Information & Electronics, Kyung Hee University, Yongin, 17104, Republic of Korea

^† These authors contributed equally to this work

- 박상철, 김인영: 석사과정, 김영일, 김대겸: 연구원, 오승주, 이기안, 이빈: 교수

^*Corresponding Author: Bin Lee
Tel: +82-10-2385-2244, E-mail: leebin@khu.ac.kr

This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

This corrects the article "Residual Stress Analysis of Additive Manufactured A356.2 Aluminum Alloys using X-Ray Diffraction Methods" on page 534.

Erratum

“X-선 회절을 통한 적층제조 A356.2 알루미늄 합금의 잔류응력 분석, 대한금속·재료학회지, Vol. 61, No. 7 (2023), pp.534-544, “https://doi.org/10.3365/KJMM.2023.61.7.534”의 그림 14를 저자의 요청으로 아래와 같이 수정합니다.

[수정 전]

Fig. 14. Microstructures of additive manufactured A356.2 samples revealed by SEM-EDS analysis

[수정 후]

Fig. 14. Microstructures of additive manufactured A356.2 samples revealed by SEM-EDS analysis

TOOLS

PDF Links

PubReader

ePub Link

Full text via DOI

Download Citation

METRICS

Crossref

Scopus

1,290

View

Download

Residual Stress Analysis of Additive Manufactured A356.2 Aluminum Alloys using X-Ray Diffraction Methods 2023 July;61(7)

Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071 FAX: +82-2-557-1080 E-mail: metal@kim.or.kr

About | Browse Articles | Current Issue | For Authors and Reviewers