 |
|
Effects of Heat Treatment Condition and Counter Materials on the Wear Behavior of Laser Direct Energy Deposited Fe-8Cr-3V-2Mo-2W Alloy
Kyeongsik Ha, Young Keun Park, Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, Wookjin Lee
Korean J. Met. Mater.. 2020;58(10):680-692. Published online 2020 Oct 5 DOI: https://doi.org/10.3365/KJMM.2020.58.10.680
|
|
Citations to this article as recorded by
 Al addition-enabled enhancement of wear resistance through adhesion of oxides in AISI4340 steel
Dong-Kyu Kim, Seoyoon Gong, Eunah Kim, Singon Kang, Il-Jeong Park, Heon Kang, Jae-hyuck Shin, Jeong-Won Choi, Se-Eun Shin, Seung-Joon Lee
Tribology International.2025; 204: 110453. CrossRef Study on Additive Manufacturing Optimization of High Hardness Material (AISI M4) Based on Preheating Process Using High Energy Directed Energy Deposition (DED) Technology
Yongjae Kwon, SeongSeon Shin, JongHoon Lee, SungWook Kim, JunHo Hwang, Hyun Deok Kim
Journal of Welding and Joining.2025; 43(1): 79. CrossRef Effect of residual stress on pore formation in multi-materials deposited via directed energy deposition
Geon-Woo Park, Seungwoo Song, Minha Park, Sunmi Shin, Dae-Joong Kim, Yong-Mo Koo, Sungwook Kim, Kee-Ahn Lee, Byung Jun Kim, Sung Soo Park, Jong Bae Jeon
Additive Manufacturing.2024; 81: 104016. CrossRef Design and Optimization of Tool Steel Material Deposition Process for Remanufacturing of Dies and Moulds and System Development
Sung-Moon Yang, Jae-Hyun Yu, Sang-Yul Park
Journal of the Korean Society of Manufacturing Pro.2024; 23(3): 89. CrossRef Surface Properties and Tribological Behavior of Additively Manufactured Components: A Systematic Review
Christian Orgeldinger, Armin Seynstahl, Tobias Rosnitschek, Stephan Tremmel
Lubricants.2023; 11(6): 257. CrossRef Wear Properties of High-Hardness Tool Steel by Directed Energy Deposition Based Additive Manufacturing
Sungwook Kim, Chang-Keun Chun
Journal of Welding and Joining.2023; 41(3): 169. CrossRef Effect of Process Parameter and Scanning Strategy on the Microstructure and Mechanical Properties of Inconel 625 Superalloy Manufactured by Laser Direct Energy Deposition
Hyunji Nam, Qing-Ye Jin, Jiyoung Park, Wookjin Lee
Korean Journal of Metals and Materials.2023; 61(10): 772. CrossRef Healable Anti-Corrosive and Wear-Resistant Silicone-Oil-Impregnated Porous Oxide Layer of Aluminum Alloy by Plasma Electrolytic Oxidation
Yeji Shin, Kichang Bae, Sumin Lee, Hweeyong Kim, Dongmin Shin, Donghyun Kim, Eunyoung Choi, Hyoung-Seok Moon, Junghoon Lee
Nanomaterials.2023; 13(18): 2582. CrossRef Mechanical properties and wear resistance of direct energy deposited Fe–12Mn–5Cr–1Ni-0.4C steel deposited on spheroidal graphite cast iron
Young Keun Park, Kyeongsik Ha, Ki Chang Bae, Kwang Yong Shin, Ki Yong Lee, Do-sik Shim, Wookjin Lee
Journal of Materials Research and Technology.2022; 19: 3484. CrossRef Microstructural evolution and martensitic transformation in FeCrV alloy fabricated via additive manufacturing
Junyeop Lee, Ye-eun Jeong, Do-sik Shim, Eunkyung Lee
Materials Science and Engineering: A.2021; 809: 140943. CrossRef Wear Behavior of Conventionally and Directly Aged Maraging 18Ni-300 Steel Produced by Laser Powder Bed Fusion
Kichang Bae, Dohyung Kim, Wookjin Lee, Yongho Park
Materials.2021; 14(10): 2588. CrossRef Wear resistance of direct-energy–deposited AISI M2 tool steel with and without post-heat treatment
Young Keun Park, Kyeongsik Ha, Kwang Yong Shin, Ki Yong Lee, Dong Joo Kim, Se-Hun Kwon, Wookjin Lee
The International Journal of Advanced Manufacturin.2021; 116(11-12): 3917. CrossRef
|