| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Volume 58(6); Jun 2020
RSS feed
Research Papers
369 The Study on the Manufacturing Cold Cured Briquette Using Curing Reaction of Sodium Silicate
규산 소다의 경화 반응을 이용한 상온 경화 괴성광 제조에 대한 연구
Kang-Min Kim, Jeong-Whan Han
김강민, 한정환
Korean J. Met. Mater. 2020;58(6):369-374.   Published online 2020 May 20
DOI: https://doi.org/10.3365/KJMM.2020.58.6.369

Abstract
New technologies need to be developed in the ironmaking process to reduce carbon dioxide emissions. To achieve this, in recent years steelmakers have been working to reduce coke usage by increasing thermal energy efficiency. However, it is very difficult to reduce coke consumption while maintaining production, because the level of..... More

                        
375 Effect of Strain Rate and Loading Direction on the Mechanical Properties of Ni-Cr-Al Superalloy Foam Fabricated by Powder Alloying Method
분말 합금법으로 제조된 Ni-Cr-Al 초합금 다공체의 인장 특성에 미치는 변형률 속도 및 하중 방향 효과
Kyu-Sik Kim, Jung-Suk Bae, Jae-Sung Oh, Kee-Ahn Lee
김규식, 배정석, 오재성, 이기안
Korean J. Met. Mater. 2020;58(6):375-382.   Published online 2020 May 20
DOI: https://doi.org/10.3365/KJMM.2020.58.6.375

Abstract
The powder-alloyed metallic sheet foam manufacturing process has the advantage of being able to control pore shape, size, and distribution more easily and homogeneously than conventional foam manufacturing processes. The effects of strain rate and tensile direction on the mechanical properties of Ni-Cr-Al superalloy foam fabricated by powder alloying method..... More

                        
Review papers
383 Causes and Measures of Fume in Directed Energy Deposition: A Review
Directed Energy Deposition에서 흄의 생성 원인 및 대책
Kang-Hyung Kim, Chan-Hyun Jung, Dae-Yong Jeong, Soong-Keun Hyun
김강형, 정찬현, 정대용, 현승균
Korean J. Met. Mater. 2020;58(6):383-396.   Published online 2020 May 14
DOI: https://doi.org/10.3365/KJMM.2020.58.6.383

Abstract
Pores and cracks are known as the main defects in metal additive manufacturing (MAM), including directed energy deposition(DED). A gaseous fume is often produced by laser flash (instantaneous high temperature) during laser processing, which may cause various defects such as porosity, lack of fusion, inhomogeneity, low flowability and composition change,..... More

                        
Research Papers
397 Adsorption and Recovery using Vaporization of Liquid Fluorocarbon Precursor
액상플루오르카본전구체(Liquid Fluorocarbon Precursor)의 기화를 이용한 흡착 및 회수
Junyoung Park, Byoungmoon Oh, Kyongnam Kim
박준영, 오병문, 김경남
Korean J. Met. Mater. 2020;58(6):397-402.   Published online 2020 May 14
DOI: https://doi.org/10.3365/KJMM.2020.58.6.397

Abstract
PFC gas is primarily used during the etching process in the manufacture of ULSIs and in cleaning after CVD processes. PFC is classified as a greenhouse gas that stays in the atmosphere for a long time and has a high GWP. High capacity and high integration have been achieved in..... More

                        
403 Effect of Cladding Conditions on Solidification Cracking Behavior during Dissimilar Cladding of Inconel Alloy FM 52 and 308L Stainless Steel to Carbon Steel: Evaluation of Solidification Brittle Temperature Range by Transverse−Varestraint Test
인코넬 FM52 및 308L 스테인리스강을 이용한 탄소강 이종 클래딩 및 공정변수에 따른 응고균열 발생 거동 변화: Transverse-Varestraint 시험을 이용한 응고취성 온도범위 평가
Yookyung Kim, Byungrok Moon, Namhyun Kang, Eun-Joon Chun
김유경, 문병록, 강남현, 천은준
Korean J. Met. Mater. 2020;58(6):403-412.   Published online 2020 May 14
DOI: https://doi.org/10.3365/KJMM.2020.58.6.403

Abstract
In this study, solidification cracking behavior and susceptibility in dissimilar cladding of Inconel alloy FM 52, 308L stainless steel to carbon steel, was investigated by submerged arc welding and transverse−Varestraint testing with gas tungsten arc welding. The effect of cladding conditions on cracking behavior and susceptibility was extensively evaluated, and..... More

                        
413 Prediction of Electropulse-Induced Nonlinear Temperature Variation of Mg Alloy Based on Machine Learning
기계 학습을 활용한 마그네슘 합금의 통전 비선형 온도 예측
Jinyeong Yu, Myoungjae Lee, Young Hoon Moon, Yoojeong Noh, Taekyung Lee
유진영, 이명재, 문영훈, 노유정, 이태경
Korean J. Met. Mater. 2020;58(6):413-422.   Published online 2020 May 19
DOI: https://doi.org/10.3365/KJMM.2020.58.6.413

Abstract
Electropulse-induced heating has attracted attention due to its high energy efficiency. However, the process gives rise to a nonlinear temperature variation, which is difficult to predict using a traditional physics model. As an alternative, this study employed machine-learning technology to predict such temperature variation for the first time. Mg alloy..... More

                        
423 Interactions Between Ionic Liquid (ALiCY) and TBP and their Use in Hydrometallurgy for Extracting Co(II) and Ni(II)
Thanh Tuan Tran, Man Seung Lee
Korean J. Met. Mater. 2020;58(6):423-432.   Published online 2020 May 14
DOI: https://doi.org/10.3365/KJMM.2020.58.6.423

Abstract
Ionic liquids have emerged in hydrometallurgy as potential extractants for metals. In this work, the interactions of ALiCY (R4N+A-) synthesized by Aliquat336 and Cyanex272, and a mixture of ALiCY and TBP, were analyzed using extraction data and FT-IR spectroscopy. Co(II) and Ni(II) were extracted from two HCl concentrations (1.0×10-4 and..... More

                        
433 Optical Properties of CaF2 Anti-Reflection Coating On ZnS for 8~12 µm Infrared Region
CaF2 저반사 코팅된 ZnS 윈도우의 8~12 µm 적외선 영역 광학적 특성
Ill-Joo Lee, Seung-Chan Hong, Byung-Sam Kim, Jae-Kyung Cheon
이일주, 홍승찬, 김병삼, 천재경
Korean J. Met. Mater. 2020;58(6):433-438.   Published online 2020 May 19
DOI: https://doi.org/10.3365/KJMM.2020.58.6.433

Abstract
Technologies for pedestrian safety are increasingly emphasized by Automakers in advance of autonomous driving vehicles. A Night Vision System attached behind the front grille can reduce fatal accidents, especially during the nighttime, however, consumers may hesitate to adopt such systems on account of their high price. High-cost Germanium is used..... More

                        
439 Influence of Cu Doping on Bipolar Conduction Suppression for p-type Bi0.5Sb1.5Te3 and Bi0.4Sb1.6Te3 Alloys
Cu 첨가에 따른 p-type Bi0.5Sb1.5Te3 및 Bi0.4Sb1.6Te3 합금의 양극성 전도 저감 효과
Hyun-Jun Cho, Hyun-Sik Kim, Woong-hee Sohn, Sang-il Kim
조현준, 김현식, 손웅희, 김상일
Korean J. Met. Mater. 2020;58(6):439-445.   Published online 2020 May 21
DOI: https://doi.org/10.3365/KJMM.2020.58.6.439

Abstract
In this study, we report how Cu doping can modify the thermoelectric performance of p-type Bi0.5Sb1.5Te3 and Bi0.4Sb1.6Te3 thermoelectric alloys, including their electronic and thermal transport properties. For electronic transport, the power factors of both Bi0.5Sb1.5Te3 and Bi0.4Sb1.6Te3 compositions were increased by Cu doping. The origins of the enhanced power..... More

                        
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community