| Home | E-Submission/Review | Sitemap | Editorial Office |  
Volume 56(9); Sep 2018
RSS feed
Research Papers
779 Precise Flow Stress Analysis for the Occurrence of Dynamic Ferritic Transformation and Dynamic Recrystallization of Austenite in Low Carbon Steel
고온 변형 곡선을 이용한 동적 재결정 해석과 동적 상변태의 조기 예측
Nokeun Park
Korean J. Met. Mater. 2018;56(11):779-786.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.779

There have been previous attempts to observe the occurrence of dynamic ferritic transformation at temperatures even above Ae3 in a low-carbon steel, and not only in steels, but recently also in titanium alloys. In this study, a new approach is proposed that involves treating true stress-true strain curves in uniaxial..... More

787 Effects of Tempering Condition on the Microstructure and Mechanical Properties of 30MnB5 Hot-Stamping steel
핫스탬핑용 30MnB5강의 템퍼링 조건에 따른 미세조직 및 기계적 물성 연구
Junyeong Jeong, Sang-Cheon Park, Ga-Young Shin, Chang Wook Lee, Tae-Jeong Kim, Min-Su Choi
정준영, 박상천, 신가영, 이창욱, 김태정, 최민수
Korean J. Met. Mater. 2018;56(11):787-795.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.787

The effects of tempering condition on the microstructure and mechanical properties of 30MnB5 hot stamping steel were investigated in this study. Before the tempering, hot-stamped 30MnB5 steel was composed of only α′-martensite microstructure without precipitates. After the tempering at 180 ℃ for 120 min, nano-sized ε-carbides were precipitated in the..... More

796 Impact Toughness and Softening of the Heat Affected Zone of High Heat Input Welded 390 MPa Yield Strength Grade TMCP Steel
항복강도 390 MPa급 가공열처리강 대입열용접 열영향부 충격인성 및 연화현상
Kook-Soo Bang, Young-Ho Ahn, Hong-Chul Jeong
방국수, 안영호, 정홍철
Korean J. Met. Mater. 2018;56(11):796-804.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.796

The Charpy impact toughness of the heat affected zone (HAZ) of electro gas welded 390 MPa yield strength grade steel, manufactured by a thermo mechanically controlled process, was investigated. The effects of added Nb on the toughness of the steel and the factors influencing scatter in toughness are discussed in..... More

805 Effect of Alloying Elements on the Thermal Conductivity and Casting Characteristics of Aluminum Alloys in High Pressure Die Casting
고압 다이캐스팅용 알루미늄 합금의 열전도성 및 주조성에 미치는 첨가원소의 영향
Cheol-Woo Kim, Young-Chan Kim, Jung-Han Kim, Jae-Ik Cho, Min-Suk Oh
김철우, 김영찬, 김정한, 조재익, 오민석
Korean J. Met. Mater. 2018;56(11):805-812.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.805

High pressure die casting is one of the precision casting methods. It is highly productivity and suitable for manufacturing components with complex shapes and accurate dimensions. Recently, there has been increasing demand for efficient heat dissipation components, to control the heat generated by devices, which directly affects the efficiency and..... More

813 Comparative Study of Estimation Methods of the Endpoint Temperature in Basic Oxygen Furnace Steelmaking Process with Selection of Input Parameters
Tae Chang Park, Beom Seok Kim, Tae Young Kim, Il Bong Jin, Yeong Koo Yeo
Korean J. Met. Mater. 2018;56(11):813-821.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.813

The basic oxygen furnace (BOF) steelmaking process in the steel industry is highly complicated, and subject to variations in raw material composition. During the BOF steelmaking process, it is essential to maintain the carbon content and the endpoint temperature at their set points in the liquid steel. This paper presents..... More

822 Thermoelectric Properties of P-type (Ce1-zYbz)0.8Fe4-xCoxSb12 Skutterudites
Deok-Yeong Choi, Ye-Eun Cha, Il-Ho Kim
Korean J. Met. Mater. 2018;56(11):822-828.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.822

P-type Ce/Yb-filled skutterudites were synthesized, and their charge transport and thermoelectric properties were investigated with partial double filling and charge compensation. In the case of (Ce1-zYbz)0.8Fe4Sb12 without Co substitution, the marcasite (FeSb2) phase formed alongside the skutterudite phase, but the generation of the marcasite phase was inhibited by increasing Co..... More

829 Hydrogenation Properties of MgH2–CaO Composites Synthesized by Hydrogen-Induced Mechanical Alloying
Min Gyeom Kim, Jeong-Heum Han, Young-Hwan Lee, Jong-Tae Son, Tae Whan Hong
Korean J. Met. Mater. 2018;56(11):829-834.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.829

Although magnesium-based alloys are attractive materials for hydrogen storage applications, their activation properties, hydrogenation/dehydrogenation kinetics, thermodynamic equilibrium parameters, and degradation characteristics must be improved for practical applications. Further, magnesium poses several risks, including explosion hazard, environmental pollution, insufficient formability, and industrial damage. To overcome these problems, CaO-added Mg alloys, also..... More

835 Rosette Strain Sensors Based on Stretchable Metal Nanowire Piezoresistive Electrodes
신축성 금속 나노선 압저항 전극 기반 로젯 스트레인 센서
Kang-Hyun Kim, Jae-Gyeong Cha, Jong-Man Kim
김강현, 차재경, 김종만
Korean J. Met. Mater. 2018;56(11):835-843.   Published online 2018 Nov 5
DOI: https://doi.org/10.3365/KJMM.2018.56.11.835

In this work, we report a delta rosette strain sensor based on highly stretchable silver nanowire (AgNW) percolation piezoresistors. The proposed rosette strain sensors were easily prepared by a facile twostep fabrication route. First, three identical AgNW piezoresistive electrodes were patterned in a simple and precise manner on a donor..... More

Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community