Abstract
The use of heat dissipation materials in various field such as power semiconductor device, LED and microelectronic system. Therefore, there is a need for heat dissipation materials using copper (Cu) and graphite (Gr). These materials have high thermal conductivity. In particular, graphite has high thermal stability with a low coefficient..... More

Abstract
Focused ion beam (FIB) technology is one of the most widely used methods for fabricating crosssectional analysis specimens because of its high precision and characteristics that minimize the occurrence of defects. Demand for large cross-sectional area analysis is increasing to improve product reliability in various industries, but is limited by..... More

Abstract
In this study, we investigated the influence of cold rolling reduction on microstructural evolution and slip behavior in Ta-10W alloy fabricated by vacuum arc melting (VAM). As the reduction increased, both single and multiple slips were observed within some grain interiors. At reductions of 20% and 40%, deformation bands, primarily..... More

Abstract
The strength of Ni-base superalloys mainly depends on the γ' precipitates that improve the strength of the materials at high temperatures. The presence of γ' particles within the matrix restricts dislocation movement, and optimized heat treatments can tailor the size, shape, and volume fraction of γ'. In this study the..... More

Abstract
This research explores how aggregation influences the electrical behavior at both the planar - heterojunction poly(3-hexylthiophene) (P3HT)/SiO2 and P3HT/ZnO nanocrystal (NC) interfaces. The formation of H- and J-type aggregates leads to distinct molecular ordering and packing structures, manifesting as changes in threshold voltage shifts (electrical gating) as well as absorption..... More

Abstract
It is well-known that optical transparence and electric resistance have a trade-off relationship in transparent electrodes. For this reason, developing methods to predict this relation have been important in various fields of academic research as well as for industrial applications. Herein, we suggest a simple method which reveals the relationship..... More

Abstract
To achieve net zero emissions, green hydrogen should be produced via water electrolysis with renewable energy. To develop efficient anion exchange membrane water electrolyzers (AEMWE), the development of efficient and stable non-precious metal electrocatalysts for the oxygen evolution reaction (OER) is essential. In this study, a high-performance ternary NiFeCo-layer double..... More

Abstract
In this study, thermoelectric chalcostibite (CuSbS₂) compounds were fabricated using mechanical alloying (MA) and hot pressing (HP), and phase identification, microstructural observation, and thermal analysis were conducted. The thermal properties were then measured and compared with those of other Cu–Sb–S ternary compounds synthesized by the same solid-state process, namely, skinnerite..... More

Abstract
Cu₃SbSe₄ is considered a promising thermoelectric material because of its large effective mass and low thermal conductivity, originating from its unique lattice structure. However, Cu₃SbSe₄ has intrinsically low carrier concentration and relatively high electric resistance which limit performance. Recently, a zT improvement in Cu₃SbSe₄ was reported where doping/precipitation is controlled..... More