| Home | E-Submission/Review | Sitemap | Editorial Office |  
Current Issue > Current Issue

Table of Contents | October, 2020  Vol. 58   No.10 Previous Issue | Next Issue | Archive
In this issue:

Research Papers
653 Hydrogen Induced Cracks in Stainless Steel 304 in Hydrogen Pressure and Stress Corrosive Atmosphere
수소가압 및 응력부식 분위기에서 스테인레스강 SS304의 수소취성균열
Byung Hak Choe, Sang Woo Lee, Jong Kee Ahn, Jinhee Lee, Tae Woon Lim
최병학, 이상우, 안종기, 이진희, 임태운
Korean J. Met. Mater. 2020;58(10):653-659.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.653

The phenomena of hydrogen induced cracking (HIC) in 304 stainless steels was considered in a hydrogen pressure and stress corrosive atmosphere. Microstructures with chloride pits and stress corrosion cracks around the HIC were analyzed by SEM/EDS. Abnormal phase transformations induced by the hydrogen were analyzed using TEM and diffraction. In..... More

660 Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys
Fe-17Mn-5Si-5Cr 형상기억합금의 형상복원거동 및 기계적 특성에 미치는 Ni, Ti 및 C의 영향
Dohyoung Kim, Yonghwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yongho Park
김도형, 김용환, 옥정중, 이정훈, 박찬희, 이욱진, 박용호
Korean J. Met. Mater. 2020;58(10):660-671.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.660

Fe-Mn-Si based shape memory alloy is a new functional material that can be used to apply prestress to civil and structural components such as concrete structures. In this study, the effects of alloying elements Ni, C and Ti on the mechanical and shape memory properties of the alloy were investigated..... More

672 Effect of β Phase Decomposition on Recrystallization in α-Zr Region in Zr-2.5%Nb Pressure Tube Material
Zr-2.5%Nb 압력관 재료에서 α-Zr 영역에서의 소둔에 의한 β-상 분해가 재결정에 미치는 영향
SungSoo Kim, Sang Yup Lim, Gyeong-Geun Lee
김성수, 임상엽, 이경근
Korean J. Met. Mater. 2020;58(10):672-679.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.672

The effects of β phase decomposition on recrystallization and texture variation in Zr-2.5% Nb alloy pressure tube material were investigated. Isothermal annealing was conducted at 350 to 550 oC for 240 hours, and isothermal annealing was performed at 500 oC for 240 to 3,000 hours. The recrystallization and texture variation..... More

680 Effects of Heat Treatment Condition and Counter Materials on the Wear Behavior of Laser Direct Energy Deposited Fe-8Cr-3V-2Mo-2W Alloy
레이저 직접적층법으로 제조된 Fe-8Cr-3V-2Mo-2W합금의 마모특성에 미치는 열처리공정 및 상대재의 영향
Kyeongsik Ha, Young Keun Park, Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, Wookjin Lee
하경식, 박영근, 김태환, 백경윤, 전종배, 심도식, 문영훈, 이욱진
Korean J. Met. Mater. 2020;58(10):680-692.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.680

This study aimed to investigate the wear performance of laser direct energy deposited Fe-8Cr3V-2Mo-2W alloy under various wear environments, in terms of different heat treatment conditions. Ball on disk tribology tests were performed using high-carbon steel and zirconia balls as counter materials. The wear rates of the alloy depended significantly..... More

693 Integrity Assessment of Obsolete Thermal Storage Tank in District Heating System
지역난방 노후 축열조의 부식 건전성 평가 및 고찰
Daeho Yun, Hobyung Chae, Heesan Kim, Jung-Gu Kim, Woo Cheol Kim, Tae Baek Ha, Jaehyuk Jang, Joon Cheol Jeong, Soo Yeol Lee
윤대호, 채호병, 김희산, 김정구, 김우철, 하태백, 장재혁, 정준철, 이수열
Korean J. Met. Mater. 2020;58(10):693-702.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.693

The thermal storage tank in a district heating system is a component that stores excess heat during normal operation and releases the stored heat to increase the efficiency of the system, when the heat source is stopped or additional demands occur. Recently, an obsolete thermal storage tank was dismantled for..... More

703 Effects of Initial Precipitate on Shear Deformation during Asymmetric Rolling of Al-Mg-Si Alloy: Texture and Formability
Al-Mg-Si 합금의 초기 석출물이 비대칭 압연에 의한 전단변형에 미치는 영향 : 집합조직과 성형성
Wonkee Chae, Bong-Kyu Kim, Jongbeom Lee, Jun Hyun Han
채원기, 김봉규, 이종범, 한준현
Korean J. Met. Mater. 2020;58(10):703-714.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.703

Al-Mg-Si alloy was rolled asymmetrically at several temperatures to apply shear deformation, and the effects of the initial precipitate on shear deformation, texture evolution, formability, and plastic anisotropy were studied. Texture was analyzed using a EBSD, and the formability and plastic anisotropy of the specimen were evaluated using the value..... More

715 Deposition of Low-Resistivity Aluminum Thin Films Via Application of Substrate Bias During Magnetron Sputtering
기판 바이어스와 스퍼터 압력 조절을 통한 저저항 알루미늄 박막 형성 연구
Dooho Choi
Korean J. Met. Mater. 2020;58(10):715-720.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.715

In this study, the critical role of substrate bias during the sputter deposition of Al thin films is discussed. Two sets of Al thin films having a nominal thickness of 300 nm were deposited at sputtering pressures of 4.1 and 1.5 mTorr, respectively, with an applied negative substrate bias in..... More

721 Influence of Te Vacancies on the Thermoelectric Properties of n-type Cu0.008Bi2Te2.7-xSe0.3
n-type Cu0.008Bi2Te2.7-xSe0.3 열전 합금에서 Te 공공 형성에 의한 열전 성능 연구
Yerim Yang, TaeWan Kim, Seokown Hong, Jiwoo An, Sang-il Kim
양예림, 김태완, 홍석원, 안지우, 김상일
Korean J. Met. Mater. 2020;58(10):721-727.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.721

In this study, we report the influence of Te vacancy formation on the thermoelectric properties of n-type Cu0.008Bi2Te2.7Se0.3 alloys, including their electronic and thermal transport properties. Te-deficient Cu0.008Bi2Te2.7-xSe0.3 (x = 0, 0.005, 0.01 and 0.02) samples were systematically synthesized and characterized. Regarding electronic transport properties, carrier concentration was increased with..... More

728 KIST-NOMAD - a Repository to Manage Large Amounts of Computational Materials Science Data
Samuel Boateng, Kwang Ryeol Lee, Deepika , Haneol Cho, Kyu Hwan Lee, Chansoo Kim
Korean J. Met. Mater. 2020;58(10):728-739.   Published online 2020 Oct 5
DOI: https://doi.org/10.3365/KJMM.2020.58.10.728

We introduce the Korea Institute of Science and Technology-Novel Materials Discovery (KISTNOMAD) platform, a materials data repository. We describe its functionality and novel features from an academic viewpoint. It is a data repository designed for computational material science, especially focusing on managing and sharing the results of molecular dynamics simulation..... More

Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community