Abstract
The dynamic precipitation evolution of Mg-3 wt% Zn alloy during extrusion was evaluated in this study. Precipitation evolution during aging has been well investigated for the Mg-Zn alloy, which is known as static precipitation. However, little attention has been given to dynamic precipitation in Mg-Zn alloy. In order to evaluate..... More

Abstract
The effect of annealing temperature on shape memory properties in the Ti-44.5Ni-5Cu and Ti-45.2Ni-5Cu(at%) alloys was investigated by differential scanning calorimeter (DSC) and tensile testing. The martensitic transformation temperature of Ti-44.5Ni-5Cu(at%) increased from 308K to 324K with increasing annealing temperature and did not change with further increasing annealing temperature. This..... More

Abstract
In this study, an eco-friendly pretreatment process was developed to recycle titanium turning scraps and ferro-titanium ingots with low gaseous impurities were prepared using recycled titanium turning scraps. The amount of gaseous impurities of titanium scraps before removing the machining oils on the surface was as high as 20000 ppm...... More

Abstract
Alloys of Fe-12Cr-0.3C-4Mn-(13, 14, 15)Cu (wt%) were cast using an induction furnace. They were structurally heterogeneous composites that consisted of a relatively stiff α-Fe matrix and a soft (Cu, Mn)-rich secondary phase. They were developed as self-lubricating, wear-resistant metals. Since the formation of oxides plays an important role in wear,..... More

Abstract
Chemical mechanical polishing (CMP) of bulk AlN was performed with colloidal silica slurry at pH 9 for different times. The result shows that colloidal silica slurry at pH 9, which has the relatively high surface charge of -50.7 mV is most stable, and it was selected as chemically optimum condition..... More

Abstract
Metal-organic frameworks are used in many applications, such as gas separation, catalysis, and the synthesis of nanomaterials. Metal-organic frameworks show superior stability at high temperature, which makes them potentially useful for the adsorption of metal ions from leaching solutions at high temperature. In this work, UIO-66-NH₂, a zirconium(IV) based metal-organic..... More

Abstract
Spent lithium ion batteries contain cobalt, copper, lithium, manganese and nickel. Recovery of these metals with high purity from spent lithium ion batteries is of importance. A sulfuric acid solution is generally employed for the treatment of spent lithium ion batteries, but it is difficult to separate these metal ions..... More

Abstract
We report the effect of interface control using reduced graphene oxide (RGO) on the thermoelectric transport properties of Bi₂Te_2.7Se_0.3 (BTS)-RGO composites. The interface-controlled BTS-RGO composites were prepared by the consolidation of BTS-RGO hybrid powders using spark plasma sintering (SPS). The RGO-hybridization reduced the grain size in the BTS-RGO composites because..... More

Abstract
We employed spark plasma sintering (SPS) in the presence of sintering aids to fabricate high-quality Ho³⁺,Yb³⁺-co-doped Y₂O₃ transparent ceramics suitable for use as a laser gain medium, and analyzed their microstructure and optical properties. Ho³⁺,Yb³⁺-co-doped Y₂O₃ transparent ceramics with different contents of Yb³⁺ were fabricated by SPS and exhibited high..... More