| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Previous issue > Previous issue



Table of Contents | May, 2024  Vol. 62   No.5 Previous Issue | Next Issue | Archive
In this issue:

Research Papers
325 Notched Tensile Fracture of a Fe-15Mn-0.6C-2Al Twinning Induced Plasticity Steel at Room Temperature
Fe-15Mn-0.6C-2Al 쌍정유기소성강의 상온 노치 인장파괴 거동
Sang Hyup Yoo, Ki-Chae Chung, Hee-Beom Moon, Kyung Hoon Lee, Kyung-Tae Park
유상협, 정기채, 문희범, 이경훈, 박경태
Korean J. Met. Mater. 2024;62(5):325-333.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.325

Abstract
The tensile fracture behavior of an Al-bearing TWIP steel was investigated by conducting a series of tensile tests on smooth and notched specimens with different notch geometries, focusing on the effects of evolution of the stress triaxiality and the effective strain during deformation. The flow curve and digital image correlation..... More

                
334 Preparation of W-Ni-Cu Alloy Powder by Hydrogen Reduction of Metal Oxides
금속산화물 분말의 수소환원에 의한 W-Ni-Cu 합금분말의 합성
Youn Ji Heo, Eui Seon Lee, Ji Won Choi, Jongmin Byun, Sung-Tag Oh
허연지, 이의선, 최지원, 변종민, 오승탁
Korean J. Met. Mater. 2024;62(5):334-339.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.334

Abstract
The effect of powder processing on the microstructure and sinterability of the heavy alloy W-Ni-Cu was investigated. The heavy alloy powders were prepared by the ball milling and hydrogen reduction of metal oxide powders. As the milling time increased, the size of the powder mixture decreased and at 5 h..... More

                
340 Optimization of Ion Beam-Assisted Deposition Process for Y2O3 Film to Enhance Plasma Resistance
내 플라즈마 특성 강화를 위한 Y2O3 필름의 이온 빔 보조 증착 공정 최적화
[retracted-article]
Choluk Oh, Ojun Kwon, Younghun Bae, Hyejin Shin, Young Min Kwon, Byungjin Cho
오철욱, 권오준, 배영헌, 신혜진, 권영민, 조병진
Korean J. Met. Mater. 2024;62(5):340-350.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.340
Abstract
More
351 Friction and Wear Behavior of Selective Laser Melted Ti6Al4V-Equine Bone Nanocomposites
선택적 레이저 용융 Ti6Al4V-Equine Bone 나노 복합재료의 마찰 및 마모 특성
Se-Hee Kim, Su-Hyun Bae, Sang-Bae Park, Hoon Seonwoo, Se-Eun Shin
김세희, 배수현, 박상배, 선우훈, 신세은
Korean J. Met. Mater. 2024;62(5):351-359.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.351

Abstract
Ti6Al4V is commonly used in implants because of its excellent mechanical properties, corrosion resistance, and biocompatibility. While Hydroxyapatite (HAp) is typically used for strong biological bonding between Ti6Al4V implants and bone tissue, this study takes a different approach by incorporating Equine Bone (EB), which has a chemical structure similar to..... More

                   Web of Science 2  Crossref 1
360 Thermo-Compression Sinter-Bonding in Air Using Cu Formate/Cu Particles Mixed During Reduction of Cu2O
Woo Lim Choi, Jong-Hyun Lee
Korean J. Met. Mater. 2024;62(5):360-366.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.360

Abstract
A Cu-based paste containing Cu formate and Cu particles was prepared for the compressionassisted sinter-bonding of Cu-finished wide-bandgap power devices onto a Cu-finished substrate at a relatively low bonding temperature of 250 oC in air. A mixture of Cu formate and Cu particles was designed to mitigate the tremendous volume..... More

                
367 Microstructure, Thermal and Mechanical Properties of AlN-MgO Composites Prepared by Spark Plasma Sintering
방전 플라즈마 소결법으로 제조된, AlN-MgO 소결체의 미세구조와 열적, 기계적 특성
Mohan Chen, Myungjin Jung, Jung-Won An, Seung Yong Shin, Yunhwi Park, Sunrae Kim, Su Yong Nam, Woo-Jae Lee, Se-Hun Kwon
모한첸, 정명진, 안정원, 신승용, 박윤휘, 김선래, 남수용, 이우재, 권세훈
Korean J. Met. Mater. 2024;62(5):367-376.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.367

Abstract
AlN-MgO composites with different compositions were prepared by spark plasma sintering, and the effects of their composition on their microstructure, thermal properties, and mechanical properties were systemically investigated. MgO compositions in the AlN-MgO composites were controlled from 20 to 80 wt%. The results indicated that a phase transition did not..... More

                
377 Mg-Composition Dependent Cycle Stability in Zn1-xMgxO Li-ion Battery: Transition from Electronic Transport-Limited to Ionic Transport Limited Cycles
Byoungnam Park
Korean J. Met. Mater. 2024;62(5):377-384.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.377

Abstract
This study explores Mg-composition dependent cycle stability in a Zn1-xMgxO Li-ion battery, where battery cycles transition from an electronic transport-limited to an ionic transport limited regime. We investigated the impact of Mg doping in Zn1-xMgxO nanocrystals on Li-ion battery performance, focusing on Mg compositions between x=0.05 and x=0.15. Mg composition..... More

                
385 Uniformity of Thermoelectric Properties of N-type Bi2Te3-ySey Bulky Compacts
Se-Hyeon Choi, Go-Eun Lee, Il-Ho Kim
Korean J. Met. Mater. 2024;62(5):385-392.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.385

Abstract
Because n-type Bi2Te3-based materials exhibit lower thermoelectric performance than p-type materials and because their thermoelectric properties are sensitively changed by the composition and carrier concentration, optimizing these aspects in n-type materials is necessary to improve the thermoelectric figure of merit (ZT). In this study, the thermoelectric performance of n-type Bi2Te3-based..... More

                
393 An Examination of Bronze Vessel Technology in the Unified Silla Period: Case Study on the Bronzes Excavated from Gwanbuk-ri Site in Buyeo
통일신라 청동용기류의 제작기술 고찰: 부여 관북리 백제유적 출토 유물을 중심으로
So Jin Kim, Woo Rin Han, Young Do Kim
김소진, 한우림, 김영도
Korean J. Met. Mater. 2024;62(5):393-401.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.393

Abstract
Archaeological excavations in Buyeo had revealed Bronze vessels interred within a hole in the building at the Gwanbuk-ri site. These bronze vessels are dated to the Unified silla period (9-10th centuries). To identify the bronze vessels’ manufacturing technology, metallurgical analyses were carried out using Optical Microscopy, SEM-EDS and EPMA. The..... More

                   Crossref 2
402 Effects of Superheating Treatment on the Microstructure, Tensile and Thermal Conductivity Properties of Fe-Bearing Al-10Si-Mg Casting Alloy
Fe 함유 Al-10Si-Mg 주조 합금의 미세조직, 인장 및 열전도도 특성에 미치는 과열 처리의 효과
Jin-Hyeok Jang, Tae-Hoon Kang, Kwang-jun Euh, Young-Hee Cho, Kee-Ahn Lee
장진혁, 강태훈, 어광준, 조영희, 이기안
Korean J. Met. Mater. 2024;62(5):402-410.   Published online 2024 May 5
DOI: https://doi.org/10.3365/KJMM.2024.62.5.402

Abstract
In this study, we designed and manufactured a new Fe-bearing Al-10Si-Mg casting alloy (F alloy) and investigated its microstructure, mechanical properties, and thermal conductivity. Two types of Fe-bearing Al-10Si-Mg alloys were used: the Conventional-F alloy, injected at 720 ℃ and cooled by water quenching, and the Superheated-F alloy, heated to..... More

                
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.1
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI