Abstract
High-performance thin-film transistors (TFTs) produced at low temperatures are required for ultrahigh- resolution and flexible display applications. The scientific community has been studying unconventional techniques to investigate low voltage flexible devices and low power flexible circuits for the past decade. In particular, metal oxide semiconductors, such as indium gallium zinc..... More

Abstract
Transparent heaters are widely used for defrosting to improve visibility, insulation or heating of buildings, and thermal treatment. Indium tin oxide (ITO), which has excellent transmittance and electrical conductivity, is one of the representative materials used for these transparent heaters. However, it has several drawbacks including high material price, limited..... More

Abstract
Transparent heaters are promising devices because of their versatile applications in vehicles, smart windows, and sensors, etc. Indium tin oxide is widely used for transparent heater materials due to its high electronic conductivity and visible light transmittance. However, the cost of indium is too high, and its fabrication needs sophisticated..... More

Abstract
We fabricated a Li doped CuO photoelectrode by doping CuO with Li to improve the photoelectrochemical properties of the CuO photoelectrode. The fabricated Li doped CuO photoelectrode was optimized by experimentally investigating Li doping concentration, annealing temperature, and spin coating deposition cycle. It was confirmed that Li doped CuO had..... More

Abstract
In this study, the effect of Sb incorporation on the thermoelectric transport properties of tetradymite-type Pb(Bi_2-xSb_x)Te₄ (0≤x≤1) compounds is presented. PbBi₂Te₄ (x = 0) possesses a high electron concentration of ~1.6×10²⁰/cm³ at room temperature and exhibits n-type degenerate semiconductor behavior, in which electrical conductivity decreases and negative Seebeck coefficient increases..... More

Abstract
In this study, mechanical alloying was performed to synthesize permingeatite Cu₃Sb_1-x-ySn_xBi_ySe₄ (0.02 ≤ x ≤ 0.06 and 0.02 ≤ y ≤ 0.04) doped with Sn and Bi. Hot pressing was subsequently conducted to achieve dense sintered bodies. When the Bi content was constant, the carrier concentration increased with the Sn..... More

Abstract
Hexagonal-shaped ZnO nanodisks were synthesized at temperatures above 1000oC via thermal evaporation of a mixture of ZnO, SnO, and graphite powders as the source materials. Notably, the ZnO nanodisks were easily formed in ambient air at atmospheric pressure. The ZnO nanodisks could not be obtained without SnO in the source..... More

Abstract
The ΔEVPSC numerical code based on the elasto-visco-plastic HEM (Homogeneous Effective Medium) provides a multiscale constitutive modeling framework that is suitable for describing a wide range of mechanical behaviors of polycrystalline metals. In this study, an AA6061-T6 aluminum sample was chosen to validate the predictive capability of the ΔEVPSC stand-alone..... More

Abstract
In this study, the mechanical properties of materials were predicted using machine learning to search for superhard materials. Based on an AFOW database consisting of DFT quantum calculation values, the mechanical properties of materials were predicted using various machine learning models. For supervised learning, the entire data was divided into..... More