| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Previous issue > Previous issue



Table of Contents | April, 2019  Vol. 57   No.4 Previous Issue | Next Issue | Archive
In this issue:

Research Papers
203 Hydride Precipitation Behavior with Hydrogen Concentration and Homogenization Temperature in Zr-2.5%Nb Pressure Tube Material
Zr-2.5%Nb 압력관 재료에서 수소 농도와 균질화 처리 온도에 따른 수소화물 석출 거동
Sang Yup Lim, SungSoo Kim, Gyeong-Geun Lee
임상엽, 김성수, 이경근
Korean J. Met. Mater. 2019;57(4):203-213.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.203

Abstract
The precipitation characteristics of hydrides in Zr-2.5% Nb pressure tube material were investigated for various hydrogen concentrations and homogenization temperatures. A surface hydride was formed using the electrolytic method and homogenized at various temperatures up to at 550 oC. The homogenization treatment was carried out at 300-550 oC over 240..... More

                        
214 Effects of Exposure Temperature on Tensile and Charpy Impact Properties of the 7xxx Aluminum Alloy for Aerospace Applications
항공용 7xxx계 알루미늄 합금의 고온 노출 온도가 인장 및 샤르피 충격 특성에 미치는 영향
Woojin An, Dohee Kim, Bong-Hwan Kim, Shae Kwang Kim, Sangshik Kim, Hyokyung Sung
안우진, 김도희, 김봉환, 김세광, 김상식, 성효경
Korean J. Met. Mater. 2019;57(4):214-226.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.214

Abstract
Aluminum alloys have been widely used for aerospace applications due to their high strength and lightweight. New demand is growing for aluminum alloys with high temperature mechanical properties that can sustain plastic deformation at high temperature. In this study, correlations among microstructure, tensile properties and Charpy impact properties were analyzed..... More

                        
227 Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process
Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi
Korean J. Met. Mater. 2019;57(4):227-235.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.227

Abstract
The additive manufacturing (AM) process is a production technology process that has recently attracted attention. Among AM processes, the binder jetting (BJ) method is advantageous because it allows both wide material selection and design freedom. However, the output arrangement, which determines the direction in which the binder is injected during..... More

                        
236 Corrosion of Hot-dip Aluminized 9Cr-1Mo Steel in N2/0.1%H2S Gas
Muhammad Ali Abro, Junhee Hahn, Dong Bok Lee
Korean J. Met. Mater. 2019;57(4):236-244.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.236

Abstract
ASTM P91 steel (viz. 9Cr-1Mo steel) was hot-dip aluminized to form a ~70 μm thick coating, and was then corroded in N2/0.1%H2S gas for 50 h at 800 and 900 ºC, to study the effect of aluminizing on the corrosion resistance of P91 steel in highly corrosive H2S environments. Before..... More

                        
245 Comparative Leaching Study on Conichalcite and Chalcopyrite Under Different Leaching Systems
Jiajia Wu, Junmo Ahn, Jaeheon Lee
Korean J. Met. Mater. 2019;57(4):245-250.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.245

Abstract
Copper leaching from low-grade copper ore samples obtained from two active mines in the US, named conichalcite (sample A) and chalcopyrite (sample B), were studied under different leaching conditions using sulfuric acid and methane sulfonic acid (MSA). The conichalcite, sample A, is calcium-copper arsenite hydroxide [CaCu(AsO4)(OH)] with small amount of..... More

                        
251 Flexible OLED Encapsulation with LMPA Line
저융점합금 라인을 이용한 플렉시블 OLED 봉지
Geon Bae, Cheol-Hee Moon
배건, 문철희
Korean J. Met. Mater. 2019;57(4):251-257.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.251

Abstract
We have developed an encapsulation technology for OLED devices using an LMPA sealing line to enhance barrier characteristics against moisture and oxygen penetration. To verify the potential of this technology for flexible OLED devices, three experimental factors were investigated in this study. First, the stability of the sealing line on..... More

                        
258 Doping Effect of Indium on Zinc-tin Oxide Thin-Film Transistor Using Electrohydrodynamic Jet Spray Technology
전기수력학젯 분산 기술을 이용한 아연-주석 산화물 박막트랜지스터의 인듐 도핑 효과
Woon-Seop Choi
최운섭
Korean J. Met. Mater. 2019;57(4):258-263.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.258

Abstract
The effect of indium doping on zinc-tin oxide thin-film transistor was investigated using electrohydrodynamic (EHD) jet spray technology. EHD jet spray is a new and unique drop-on-demand patterning technology for printed electronics. After optimizing process parameters, the EHD jet spraying conditions were determined to be a voltage of 4.5 kV,..... More

                        
264 Thermoelectric Properties of MnSi1.74-1.75:Gem Prepared by Solid-State Reaction and Hot Pressing
In-Jae Lee, Sol-Bin Park, Soon-Chul Ur, Kyung-Wook Jang, Il-Ho Kim
Korean J. Met. Mater. 2019;57(4):264-269.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.264

Abstract
Higher manganese silicides (HMSs) MnSi1.74-1.75:Gem (m = 0.01–0.04) were prepared by solid-state reaction and hot pressing. The major phases of the HMSs were Mn27Si47 or Mn4Si7, and a small quantity of Si remained, but the intermetallic compound MnSi was not formed. The lattice constant increased with the substitution of Ge..... More

                        
270 Adsorption / Desorption Performance and NOx Removal Efficiency of BaO Loaded V2O5-WO3/TiO2 Selective Catalytic Reduction Catalyst
BaO가 담지된 V2O5-WO3/TiO2 SCR 촉매의 질소산화물 흡, 탈착 특성 및 제거 효율
Jin Woo Kim, Bora Ye, Minwoo Lee, Bora Jung, Duck Hyun Lee, Heesoo Lee, Hong-Dae Kim
김진우, 예보라, 이민우, 정보라, 이덕현, 이희수, 김홍대
Korean J. Met. Mater. 2019;57(4):270-277.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.270

Abstract
Recently, directly emitted NOx upon start-up has been spotlighted as a significant emissions problem. BaO loaded V2O5-WO3/TiO2 Selective Catalytic Reduction (SCR) catalysts were synthesized with various contents of barium which was a representative NOx adsorbent and their NOx adsorption, desorption, and removal efficiency were shown. The phase of BaO was..... More

                        
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community