| Home | E-Submission/Review | Sitemap | Editorial Office |  
Current Issue > Current Issue

Table of Contents | March, 2019  Vol. 57   No.3 Previous Issue | Next Issue | Archive
In this issue:

Research Papers
131 Oxidation Behaviors of Alloys Containing β/B2 Phases of Ti-45Al-Mo-Nb Alloys and Evaluation of the Oxidation Behaviors of Si Pack Cementation Coated Alloys
β/B2상을 포함한 Ti-Al-Mo-Nb 합금의 산화 거동과 실리콘 화합물 코팅을 통한 내산화성 개선
Kwangsu Choi, Youngbuem Song, Seonghoon Yi, Joon Sik Park
최광수, 송영범, 이승훈, 박준식
Korean J. Met. Mater. 2019;57(3):131-137.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.131

Alloys containing the β/B2 phases of Ti-45Al-3Mo, Ti-45Al-3Mo-2Nb and Ti-45Al-5Mo were prepared using an vacuum arc-melting machine. Heat-treatments were carried out at 1250 oC in an Ar atmosphere. The temperature of 1250 oC is the temperature region of phase α + γ + (β/B2), and the heat treatment condition which..... More

138 Effect of Cr Electroplating Layer Thickness on the Tensile and High Cycle Fatigue Properties of AISI 1045 Steel
AISI 1045 강의 인장 및 고주기 피로 특성에 미치는 Cr 도금층 두께의 영향
Gi-Su Ham, Yeon-Ji Kang, Hyung-Jun Kim, Sang-Hoon Yoon, Kee-Ahn Lee
함기수, 강연지, 김형준, 윤상훈, 이기안
Korean J. Met. Mater. 2019;57(3):138-145.   Published online 2019 Feb 14
DOI: https://doi.org/10.3365/KJMM.2019.57.3.138

This study investigated and compared the tensile and high-cycle fatigue properties of AISI 1045 steel and Cr electroplated AISI 1045 steel. First, tensile and fatigue specimens were machined from AISI 1045 steel (substrate), and two kinds of Cr electroplating layers with different layer thickness were applied. The substrate, AISI 1045..... More

146 Removal of Iron from Ilmenite Through Selective Chlorination Using Coke and Cl2 Gas
코크스와 염소가스에 의한 일메나이트 광석 중 Fe의 선택염화 제거
So-Yeong Lee, Sung-Hun Park, Ho-Sang Sohn
이소영, 박성훈, 손호상
Korean J. Met. Mater. 2019;57(3):146-153.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.146

This study on the chlorination of ilmenite ore was carried out using chlorine gas and coke as the chlorinating and reduction agents in a static bed reactor for the selective removal of iron. The effect of the amount of coke, the partial pressure of the chlorine gas and the reaction..... More

154 Improvement of Alumina Dissolution from the Mechanically Activated Dross Using Ultrasound-Assisted Leaching
Thi Thuy Nhi Nguyen, Man Seung Lee
Korean J. Met. Mater. 2019;57(3):154-161.   Published online 2019 Feb 14
DOI: https://doi.org/10.3365/KJMM.2019.57.3.154

Aluminum dross results from the re-melting of used aluminum cans, and is a valuable resource containing alumina. In general, aluminum dross contains oxides of Al, Ca, Fe, Mg, Si and Ti and some salts. As a continuation of the previous work to recover pure alumina from the dross, the effect..... More

162 Extraction Behavior of Hydrogen Ion by an Ionic Liquid Mixture of Aliquat 336 and Cyanex 272 in Chloride Solution
Minh Nhan Le, Seong Ho Son, Man Seung Lee
Korean J. Met. Mater. 2019;57(3):162-169.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.162

During the extraction of metal ions from a weak acidic chloride solution by ionic liquids consisting of an organophosphorus extractant and Aliquat 336, the equilibrium pH is sometimes observed to be higher than the initial pH. To compare the hydrogen ion extraction behavior of tertiary and quaternary amines, Alamine 336,..... More

170 Effect of Zn Doping on an Inkjet-Printed Metal Oxide Thin-Film Transistor at Low Temperature of 200 oC
저온 200 oC에서 잉크젯인쇄에 의한 금속산화물 박막트랜지스터의 아연도핑 효과
Woon-Seop Choi
Korean J. Met. Mater. 2019;57(3):170-175.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.170

Amorphous oxide semiconductors have attracted much attention due to their good electrical properties with wide band gaps and low cost process, which are used as backplanes for displays. However, there are some issues regarding low temperature process with high mobility and printing capability. The inkjet method is an attractive technology..... More

176 Effects of Zn(BH4)2, Ni, and/or Ti Doping on the Hydrogen-Storage Features of MgH2
Myoung Youp Song, Young Jun Kwak
Korean J. Met. Mater. 2019;57(3):176-183.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.176

In the present work, MgH2 was doped with Zn(BH4)2, Ni, and/or Ti to improve its hydrogen absorption and release features. Samples were prepared by grinding in a planetary ball mill in a hydrogen atmosphere. To increase the hydrogen absorption and release rates without significantly sacrificing hydrogenstorage capacity the additive percentages..... More

184 Estimation of Chemical Composition of Al-Si Cast Alloys Using Image Recognition
화상인식을 이용한 Al-Si 주조용 합금의 화학조성 예측
Sang-Jun Jeong, In-Kyu Hwang, In-Sung Cho, Hee-Soo Kim
정상준, 황인규, 조인성, 김희수
Korean J. Met. Mater. 2019;57(3):184-192.   Published online 2019 Feb 14
DOI: https://doi.org/10.3365/KJMM.2019.57.3.184

In this study, we analyzed the chemical composition of Al-Si cast alloys from microstructural images, using image recognition and machine learning. Binary Al-Si alloys of Si = 1~10 wt% were cast and prepared as reference images in the dataset used for machine learning. The machine learning procedure was constructed with..... More

193 Study of the Corrosion Behaviour, Liquid Metal Embrittlement and Resistance Spot Weldability of Galvannealed Hot Stamping Steel
합금화 용융아연도금 핫스탬핑강의 자동차 차체 적용을 위한 부식 거동, 액상금속취화현상 및 점용접성 연구
Yeonjung Hwang, Chang Wook Lee, Ga-Young Shin, Ji Hong Yoo, Minsu Choi
황연정, 이창욱, 신가영, 유지홍, 최민수
Korean J. Met. Mater. 2019;57(3):193-201.   Published online 2019 Feb 8
DOI: https://doi.org/10.3365/KJMM.2019.57.3.193

The hot stamping process is beneficial for fabricating high strength automotive parts without spring back. To suppress high temperature oxidation and decarburization, it is necessary to coat the hot stamping steel. In the present work, the performance of galvannealed coated (GA) hot stamped steel was evaluated. During cyclic corrosion tests,..... More

Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community