| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Fabrication of Semi-transparent W film Heaters via Phase Transformation
텅스텐 나노박막의 상변태를 이용한 반투명 면상발열체 형성 연구
Jiyun Choi, Dooho Choi
최지윤, 최두호
Korean J. Met. Mater. 2021;59(9):664-669.   Published online 2021 Aug 4
DOI: https://doi.org/10.3365/KJMM.2021.59.9.664

Abstract
In this study, we prepared highly thermostable semi-transparent heaters composed of W layers with thicknesses of 1-20 nm, on which a 30 nm-thick ZnO layer was deposited to serve as an anti-oxidation barrier. The optical transmittance and sheet resistance of the heaters could be greatly modulated by varying the W..... More

                        
Fabrication of WC-Graphene-Al Composites by Rapid Sintering and Their Mechanical Properties
급속소결에 의한 WC-Graphene-Al 복합재료 제조 및 기계적 성질
In-Jin Shon
손인진
Korean J. Met. Mater. 2021;59(6):384-391.   Published online 2021 May 26
DOI: https://doi.org/10.3365/KJMM.2021.59.6.384

Abstract
Tungsten carbides are very attractive because of their superior properties, e.g., high thermal and electrical conductivities, high melting point, high hardness, and relatively high chemical stability. Tungsten carbides with a binder metal, for example Ni or Co, are mainly used to fabricate nozzles, molds and cutting tools in the composite..... More

                        
Correlation between the Microstructure and Mechanical Properties of W-Bearing Ti-6Al-4V Alloys
Godwin Kwame Ahiale, In-Seok Kye, Young Sam Kwon, Yong-Jun Oh
Korean J. Met. Mater. 2021;59(6):357-364.   Published online 2021 May 26
DOI: https://doi.org/10.3365/KJMM.2021.59.6.357

Abstract
W-containing Ti-6Al-4V alloys (W=0, 1, and 5 wt%) were fabricated by the powder injection molding process, and the corresponding effects of tungsten content on the mechanical properties and microstructure of the alloys were investigated. The alloy powders were sintered at 1200 °C and then hot-isostatically-pressed at 900 °C. The fabricated..... More

                        
Microstructure and Sintering Behavior of Fine Tungsten Powders Synthesized by Ultrasonic Spray Pyrolysis
초음파 분무 열분해법으로 제조한 텅스텐 미세분말의 미세조직과 소결 거동
Hyeonhui Jo, Jeong Hyun Kim, Young-In Lee, Young-Keun Jeong, Sung-Tag Oh
조현희, 김정현, 이영인, 정영근, 오승탁
Korean J. Met. Mater. 2021;59(5):289-294.   Published online 2021 Apr 6
DOI: https://doi.org/10.3365/KJMM.2021.59.5.289

Abstract
The powder microstructure and sintering behavior of W prepared by ultrasonic spray pyrolysis and spark plasma sintering were investigated. Fine-grained W powders were synthesized by ultrasonic spray pyrolysis using an ammonium metatungstate hydrate solution and hydrogen reduction. The XRD analysis of the powder, pyrolyzed below 600 oC, showed tungsten oxide..... More

                        
Facile Synthesis of Single-Phase Alpha-Tungsten Nanopowders from Ammonium Paratungstate by RF Induction Thermal Plasma and Thermochemical Reduction
Dongyoon Shin, Hyun-Woo Shim, Basudev Swain, Kyung-Soo Park, Chan-Gi Lee
Korean J. Met. Mater. 2020;58(11):798-807.   Published online 2020 Oct 15
DOI: https://doi.org/10.3365/KJMM.2020.58.11.798

Abstract
Facile, economic methods of preparing tungsten (W) nanopowder are critically needed to meet industrial demand. Herein, we report a method of preparing single-phase alpha-W (α-W) nanopowders using ammonium paratungstate (APT) as a starting material and the optimum synthesis conditions. The process involves two stages: i) the radio-frequency (RF) induction thermal..... More

                           Cited By 2
Effect of Heat Treatment on the Microstructure and Mechanical Properties of W-7Ni-3Fe Tungsten Heavy Alloy Manufactured by Metal Injection Molding Process
Metal Injection Molding 공정으로 제조된 W-7Ni-3Fe 텅스텐 중합금의 미세조직 및 기계적 특성에 미치는 열처리의 영향
Seong-June Youn, Yeun-Ah Joo, Tae-Shik Yoon, Kee-Ahn Lee
윤성준, 주연아, 윤태식, 이기안
Korean J. Met. Mater. 2018;56(10):727-733.   Published online 2018 Oct 5
DOI: https://doi.org/10.3365/KJMM.2018.56.10.727

Abstract
This study investigated the microstructure and room temperature mechanical properties of W-7Ni-3Fe (wt%) tungsten heavy alloy (as-fabricated) which was manufactured by metal injection molding (MIM). To identify the effect of heat treatment on the W-7Ni-3Fe alloy, its properties were compared after heattreatment (1,100 oC for 1 hour) in vacuum atmosphere...... More

                        
Solvent Extraction of Tungsten(VI) from Moderate Hydrochloric Acid Solutions with LIX 63
Hoai Thanh Truong, Yong Hwan Kim, Man Seung Lee
Korean J. Met. Mater. 2017;55(6):405-411.   Published online 2017 Jun 1
DOI: https://doi.org/10.3365/KJMM.2017.55.6.405

Abstract
The solvent extraction of tungsten(VI) from hydrochloric acid solutions using 5,8-diethyl- 7-hydroxydodecan-6-one oxime (LIX 63) was analyzed in solutions having an initial pH range from 2 to 5, by varying the concentration of metal and extractant. In our experimental range, the cationic exchange reaction as well as the solvation reaction..... More

         Cited By 2
Carbothermal Reduction of Oxide of WC/Co Hardmetal Scrap
WC/Co 초경 스크랩 산화물의 환원/침탄 반응
CheolMin Kwon, Gil-Geun Lee, Gook-Hyun Ha
권철민, 이길근, 하국현
Korean J. Met. Mater. 2016;54(10):743-751.   Published online 2016 Oct 5
DOI: https://doi.org/10.3365/KJMM.2016.54.10.743

Abstract
This study conducted an analysis of the carbothermal reduction of oxidized WC/Co hardmetal scrap with solid carbon under an argon and hydrogen gas atmosphere. The WC/Co hardmetal scrap oxide consisted of WO3 and CoWO4. WO3 was reduced before CoWO4 by the solid carbon regardless of gas atmosphere. The simple oxide..... More

         Cited By 2
1 |
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI