| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Influence of Carbon Content and Isothermal Heat Treatment Temperature on the Microstructure and Mechanical Properties of Ultra-High Strength Bainitic Steels
초고강도 베이나이트강의 미세조직과 기계적 성질에 미치는 탄소함량과 항온열처리 온도의 영향
Seung Hwangbo, Hong-Bum Lee, Young-Beum Song, Jinhee Ham, Hong-Kyu Kim, Dong-Woo Suh
황보승, 이홍범, 송영범, 함진희, 김홍규, 서동우
Korean J. Met. Mater. 2019;57(6):335-342.   Published online 2019 May 16
DOI: https://doi.org/10.3365/KJMM.2019.57.6.335

Abstract
The effect of carbon content and isothermal heat treatment conditions on the microstructure evolution and mechanical properties of ultra-high strength bainitic steels was investigated. A reduction in carbon content from 0.8 wt% to 0.6 wt% in super-bainite steel with typical chemistry effectively improved not only the Charpy impact toughness but..... More

                        
Anisotropy in Green Body Bending Strength due to Additive Direction in the Binder-Jetting Additive Manufacturing Process
Ji-Won Oh, Sahn Nahm, Byoungmoon Kim, Hanshin Choi
Korean J. Met. Mater. 2019;57(4):227-235.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.227

Abstract
The additive manufacturing (AM) process is a production technology process that has recently attracted attention. Among AM processes, the binder jetting (BJ) method is advantageous because it allows both wide material selection and design freedom. However, the output arrangement, which determines the direction in which the binder is injected during..... More

                        
Effects of Exposure Temperature on Tensile and Charpy Impact Properties of the 7xxx Aluminum Alloy for Aerospace Applications
항공용 7xxx계 알루미늄 합금의 고온 노출 온도가 인장 및 샤르피 충격 특성에 미치는 영향
Woojin An, Dohee Kim, Bong-Hwan Kim, Shae Kwang Kim, Sangshik Kim, Hyokyung Sung
안우진, 김도희, 김봉환, 김세광, 김상식, 성효경
Korean J. Met. Mater. 2019;57(4):214-226.   Published online 2019 Apr 5
DOI: https://doi.org/10.3365/KJMM.2019.57.4.214

Abstract
Aluminum alloys have been widely used for aerospace applications due to their high strength and lightweight. New demand is growing for aluminum alloys with high temperature mechanical properties that can sustain plastic deformation at high temperature. In this study, correlations among microstructure, tensile properties and Charpy impact properties were analyzed..... More

                        
Influence of Nanosized AlN Powders on the Microstructure, Brazeability, and Tensile Properties of Al-based Filler for Low Temperature Al/Cu Dissimilar Brazing
Do Hyun Jung, Jae Pil Jung
Korean J. Met. Mater. 2018;56(9):664-673.   Published online 2018 Sep 5
DOI: https://doi.org/10.3365/KJMM.2018.56.9.664

Abstract
This study examined the influence of nanosized aluminum nitride (AlN) powders (0, 0.01, 0.05, 0.10, 0.30, and 0.50 wt%), on an Al4047-based filler metal. Nanosized AlN powders were dispersed uniformly into the filler metal by a mechanical mixing and melting route using a stainless steel propeller. The influences of nanosized..... More

                        
Effects of Si on the Characteristics of FCA Multi-Layer Weld Metal with 460 MPa Yield Strength Grade Steels for Ships and Marine Structures
선박 및 해양구조물용 항복강도 460 MPa급 강재의 FCA 다층 용접금속부 특성에 미치는 규소의 영향
Jong-Sig Kim, Myeong-Soo Lee, Jong-Min Jung, Han-Geul Choi, Sang-Hoon Jeong, Chang-Yong Kang
김종식, 이명수, 정종민, 최한글, 정상훈, 강창룡
Korean J. Met. Mater. 2018;56(7):499-504.   Published online 2018 Jul 5
DOI: https://doi.org/10.3365/KJMM.2018.56.7.499

Abstract
This study investigated the effect of Si on the characteristics of FCA multi-layer weld metal with 460 MPa yield strength grade steels for ships and marine structures. The effect on microstructure was evaluated by tensile, charpy impact and CTOD testing of 4 FCAW welds containing various C and Si contents...... More

                           Cited By 1
Effect of Carrier Gas on Microstructure and Macroscopic Properties of Tantalum Coating Layer Manufactured by Kinetic Spray Process
Kinetic spray 공정으로 제조된 탄탈럼 코팅층의 미세조직 및 물성에 미치는 송급 가스의 영향
Ga-Ryung Kim, Young-Kyun Kim, Hyung-Jun Kim, Kee-Ahn Lee
김가령, 김영균, 김형준, 이기안
Korean J. Met. Mater. 2018;56(5):360-365.   Published online 2018 May 8
DOI: https://doi.org/10.3365/KJMM.2018.56.5.360

Abstract
This study attempted to utilizing the kinetic spray process to manufacture tantalum coating layer and investigated the effect of carrier gas on the microstructure and macroscopic properties of the coating layer. The initial powder feed stock was a massive powder with an average particle size of 24.35 μm and 99.99%..... More

      
Effects of Manufacturing Conditions on Tensile Fracture Behaviors in Hyper-Eutectoid Steel Wires
과공석 강선에서 공정조건이 인장파단 거동에 미치는 영향
Kang Suk An, Jung Hoon Park, Won Jong Nam
안강석, 박정훈, 남원종
Korean J. Met. Mater. 2018;56(3):187-196.   Published online 2018 Mar 6
DOI: https://doi.org/10.3365/KJMM.2018.56.3.187

Abstract
This study investigated the effects of manufacturing conditions, such as patenting temperature and drawing strains, on the tensile fracture behaviors, especially on reduction of area (RA), of hyper-eutectoid steel wire. Steel wires with the chemical compositions of Fe-0.92C-1.3Si-0.6Mn-0.3Cr (wt%), were austenitized at 900 °C for 3 min and isothermally transformed..... More

      
Effect of Pre-Straining on the High-Cycle Fatigue Properties of Hot-Rolled Steel Sheets for Automotive Structural Uses
자동차 구조용 열연강판의 고주기 피로 특성에 미치는 전변형 효과
Dong-Woog Ha, Chang-Yeol Jeong
하동욱, 정창열
Korean J. Met. Mater. 2018;56(3):177-186.   Published online 2018 Mar 6
DOI: https://doi.org/10.3365/KJMM.2018.56.3.177

Abstract
The drive towards weight reduction in the automotive industry has led to the use of high strength steel sheets for structural applications. Pressing and stamping are important processes in automotive production and result in additional straining on the vehicle body and chassis sheet material. It is therefore important to have..... More

      
Effect of Heat-Treatment on the Elevated Temperature Compression and Compressive Creep Properties of Fe-14Cr Ferritic Oxide Dispersion Strengthened (ODS) Steel
Fe-14Cr계 페라이틱 산화물 분산 강화강의 고온 압축 및 크리프 특성에 미치는 열처리의 영향
Young-Kyun Kim, Yeun-Ah Joo, Jong-Kwan Park, Hwi-Jun Kim, Man-Sik Kong, Kee-Ahn Lee
김영균, 주연아, 박종관, 김휘준, 공만식, 이기안
Korean J. Met. Mater. 2017;55(12):862-869.   Published online 2017 Dec 4
DOI: https://doi.org/10.3365/KJMM.2017.55.12.862

Abstract
This study investigated the microstructure and the ambient-elevated temperature compression and elevated temperature creep properties of Fe-14Cr ferritic ODS steel manufactured by mechanical alloying (high energy ball milling) and hot extrusion processes. Initial microstructural observation of the as-extruded material identified elongated grains in the direction of extrusion; however, some recrystallization..... More

      
Bake-hardening Properties of Al-0.6Mg-1.2Si Alloy Sheets Fabricated by Twin Roll Casting
박판주조법으로 제조한 Al-0.6Mg-1.2Si 합금판재의 소부경화특성
Gi-Cheol Ju, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim
주기철, 이윤수, 김민석, 김형욱, 김양도
Korean J. Met. Mater. 2017;55(12):853-861.   Published online 2017 Dec 4
DOI: https://doi.org/10.3365/KJMM.2017.55.12.853

Abstract
The effect of pre-aging treatment on the microstructure and mechanical properties of Al-0.6Mg-1.2Si aluminum alloy sheets fabricated by twin roll casting (TRC) was investigated. It was observed that two kinds of nanoclusters, cluster(1) and cluster(2), play an important role in the bake-hardening properties of Al-Mg-Si aluminum alloy. The hardness of..... More

      
Effect of Aluminum Welding Wire Mg Content on the Mechanical Properties of Al 5083 Alloy Weld Metal
Al 5083 합금 용접부의 기계적 물성에 미치는 Mg의 영향
Dongyoon Kim, Dongcheol Kim, Munjin Kang, Young-Min Kim
김동윤, 김동철, 강문진, 김영민
Korean J. Met. Mater. 2017;55(10):716-723.   Published online 2017 Sep 28
DOI: https://doi.org/10.3365/KJMM.2017.55.10.716

Abstract
A new aluminum welding wire with 0.8 wt% higher in Mg content was developed and compared with commercial welding wire of the 5000 series. The weldability of the Al5083 base material was evaluated using high current metal inert gas (MIG) welding, using the developed Al5183 and commercial Al5183 welding wire...... More

      
Direct Laser Deposition of 14Cr Oxide Dispersion Strengthened Steel Powders Using Y<sub>2</sub>O<sub>3</sub> and HfO<sub>2</sub> Dispersoids
Barton Mensah Arkhurst, Jin-Ju Park, Chang-Hoon Lee, Jeoung Han Kim
Korean J. Met. Mater. 2017;55(8):550-558.   Published online 2017 Aug 1
DOI: https://doi.org/10.3365/KJMM.2017.55.8.550

Abstract
This study investigated the feasibility of using HfO2 as a dispersoid in the additive manufacturing process, compared to Y2O3. The effect of pre-annealing treatment was investigated too. Scanning electron microscopy (SEM) analyses revealed unusually coarse deposition layers for both the HfO2 and Y2O3 dispersed oxide dispersion strengthed (ODS) steels, in..... More

         Cited By 1
Enhanced Mechanical Properties by Directional Solidification and Cold Drawing in Cu Added Zn-Al Alloys
Cu가 첨가된 Zn-Al 합금에서 일방향응고 및 냉간인발에 따른 기계적 특성 향상
Hae Chang Jeong, Min Soo Kim, Jee Hyuk Ahn, Sung Hwan Lim, Seung Zeon Han, Jehyun Lee, Kwang Ho Kim
정해창, 김민수, 안지혁, 임성환, 한승전, 이재현, 김광호
Korean J. Met. Mater. 2017;55(8):529-536.   Published online 2017 Aug 1
DOI: https://doi.org/10.3365/KJMM.2017.55.8.529

Abstract
The lamellar structure of two phases, the Zn-rich and Al-rich phases, is formed in a Zn-5 wt% Al eutectic alloy. In order to study the effect of microstructural changes on the tensile properties of eutectic Zn-Al binary alloy, Zn-Al and Zn-Al-Cu alloys were directionally solidified at a growth rate of..... More

      
Hot Deformation Behavior of As-cast Low Nickel Fe-22Cr-9.5Mn-3.3Ni Austenite Steel
니켈감량 Fe-22Cr-9.5Mn-3.3Ni 오스테나이트강 주조재의 고온 변형성
Sang Yeon Ahn, Jae Sook Song, Sun Ig Hong
안상연, 송재숙, 홍순익
Korean J. Met. Mater. 2017;55(7):477-485.   Published online 2017 Jul 4
DOI: https://doi.org/10.3365/KJMM.2017.55.7.477

Abstract
The hot deformation behavior of as-cast and homogenized Fe-22Cr-9.5Mn-3.3Ni stainless steel was investigated over a temperature range between 600~1,250 ℃. The deformability of the as-cast Fe-22Cr-9.5Mn-3.3Ni steel decreased with increasing temperature up to 850 ℃, and then increased at temperatures between 900 and 1200 ℃ caused by dynamic recrystallization at..... More

      
Phase Transformation Behavior of Oxide Particles Formed in Mechanically Alloyed Fe-5Y<sub>2</sub>O<sub>3</sub> Powder
Fe-5Y2O3 조성의 기계적 합금화 분말에 형성된 산화물의 상변태 거동
Ga Eon Kim, Jung-Sun Choi, Sanghoon Noh, Suk Hoon Kang, Byoung Kwon Choi, Young Do Kim, Tae Kyu Kim
김가언, 최정선, 노상훈, 강석훈, 최병권, 김영도, 김태규
Korean J. Met. Mater. 2017;55(5):357-362.   Published online 2017 May 9
DOI: https://doi.org/10.3365/KJMM.2017.55.5.357

Abstract
The phase transformation behavior of the oxides formed in mechanically alloyed Fe-5Y2O3 powder is investigated. Non-stoichiometric Y-rich and Fe-rich oxides with sizes of less than 300 nm are observed in the mechanically alloyed powder. The diffusion and redistribution reactions of the elements in these oxides during heating of the powder..... More

      
Reduction Behaviors of Carbon Composite Iron Oxide Briquette Under Oxidation Atmosphere
산화성분위기에서의 탄재 내장 산화철 브리켓의 환원특성
Ki-Woo Lee, Kang-Min Kim, Jae-Hong Kwon, Sang-Han Son, Jeong-Whan Han
이기우, 김강민, 권재홍, 손상한, 한정환
Korean J. Met. Mater. 2017;55(1):24-30.   Published online 2017 Jan 5
DOI: https://doi.org/10.3365/KJMM.2017.55.1.24

Abstract
The carbon composite iron oxide briquette (CCB) is considered a potential solution to the upcoming use of low grade iron resources in the ironmaking process. CCB is able to reduce raw material cost by enabling the use of low grade powdered iron ores and coal. Additionally, the fast reduction of..... More

      
Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars
내진용 고강도 철근의 제조와 기술 개발 동향
Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won
황병철, 심재혁, 이명규, 이준호, 정준호, 김보성, 원성빈
Korean J. Met. Mater. 2016;54(12):862-874.   Published online 2016 Dec 5
DOI: https://doi.org/10.3365/KJMM.2016.54.12.862

Abstract
Since reconstruction of old town in Korea requires high-rise and seismic design construction, many attentions have been paid to high strength seismic reinforced steel bar. In the present paper, technical developments and trends are summarized for developing next-generation seismic reinforced steel bar of grade 700 MPa. Steelmaking process requires high..... More

         Cited By 2
1 |
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community