| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Evaluation of Dynamic Precipitation in Extruded Mg-Zn Alloy
Mg-Zn합금의 압출 공정 중 동적 석출 거동에 대한 고찰
Guang Zhe Li, Min Young Na, Hye Jung Chang, Pil Ryung Cha, Yu Chan Kim, Hyun Kwang Seok
이광철, 나민영, 장혜정, 차필령, 김유찬, 석현광
Korean J. Met. Mater. 2019;57(9):555-561.   Published online 2019 Aug 21
DOI: https://doi.org/10.3365/KJMM.2019.57.9.555

Abstract
The dynamic precipitation evolution of Mg-3 wt% Zn alloy during extrusion was evaluated in this study. Precipitation evolution during aging has been well investigated for the Mg-Zn alloy, which is known as static precipitation. However, little attention has been given to dynamic precipitation in Mg-Zn alloy. In order to evaluate..... More

                        
Effect of Pre-Aging Treatment on Bake-Hardenability of Al-8.0Zn-2.5Mg-2.0Cu Alloy Sheet Fabricated by Twin-Roll Casting Process
박판주조공정으로 제조한 Al-8.0Zn-2.5Mg-2.0Cu 합금 판재의 소부경화특성에 미치는 예비시효의 영향
Ji-Goo Heo, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim
허지구, 이윤수, 김민석, 김형욱, 김양도
Korean J. Met. Mater. 2019;57(6):396-404.   Published online 2019 May 16
DOI: https://doi.org/10.3365/KJMM.2019.57.6.396

Abstract
The effects of natural and pre-aging on the microstructure and mechanical properties of Al-8.0Zn-2.5Mg-2.0Cu aluminum alloy sheet fabricated by twin roll casting were investigated. Immediately after solution treatment, the Al-8.0Zn-2.5Mg-2.0Cu alloy sheet had a yield strength of 173 MPa and elongation of 19.5%. The hardness of the Al-8.0Zn-2.5Mg-2.0Cu alloy sheet..... More

                        
Effect of Prior Cold Working before Aging on the Precipitation Behavior in a Cu-3.5 wt% Ti Alloy
Cu-3.5 wt% Ti 합금의 석출 거동에 미치는 시효 전 가공의 영향
Minah Jo, Eun-Ae Choi, Jee Hyuk Ahn, Young Guk Son, Kwangho Kim, Jehyun Lee, Satoshi Semboshi, Seung Zeon Han
조민아, 최은애, 안지혁, 손영국, 김광호, 이재현, 사토시 셈보시, 한승전
Korean J. Met. Mater. 2019;57(1):10-17.   Published online 2018 Dec 14
DOI: https://doi.org/10.3365/KJMM.2019.57.1.10

Abstract
Cu-Ti alloys were strengthened by Cu4Ti intermetallic compound precipitation in a Cu matrix during aging. The Cu-3.5 wt% Ti(Cu-4.6 at% Ti) alloys without deformation and with uniform and non-uniform deformation were aged at 450 oC for various times after solution treatment at 885 oC. The uniformly and non-uniformly deformed alloys..... More

                        
Effect of Al Addition on the Microstructure, Tensile Properties, and Bendability of Extruded Mg-7Sn-1Zn Alloy
Al 첨가가 Mg-7Sn-1Zn 합금 압출재의 미세조직과 인장 및 굽힘 특성에 미치는 영향
Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Jae Ok Choi, Jeong-Hun Lee, Sung Hyuk Park
김상훈, 이종언, 김예진, 최재옥, 이정훈, 박성혁
Korean J. Met. Mater. 2018;56(1):40-48.   Published online 2018 Jan 1
DOI: https://doi.org/10.3365/KJMM.2018.56.1.40

Abstract
The effect of Al addition on the microstructure and mechanical properties of extruded Mg-Sn based alloy is investigated by adding 1 wt% Al to the Mg-7Sn-1Zn alloy and indirectly extruding the billets with and without the Al addition. The Al addition promotes dynamic recrystallization (DRX) behaviour during hot extrusion, which..... More

         Cited By 5
Bake-hardening Properties of Al-0.6Mg-1.2Si Alloy Sheets Fabricated by Twin Roll Casting
박판주조법으로 제조한 Al-0.6Mg-1.2Si 합금판재의 소부경화특성
Gi-Cheol Ju, Yun-Soo Lee, Min-Seok Kim, Hyoung-Wook Kim, Yang-Do Kim
주기철, 이윤수, 김민석, 김형욱, 김양도
Korean J. Met. Mater. 2017;55(12):853-861.   Published online 2017 Dec 4
DOI: https://doi.org/10.3365/KJMM.2017.55.12.853

Abstract
The effect of pre-aging treatment on the microstructure and mechanical properties of Al-0.6Mg-1.2Si aluminum alloy sheets fabricated by twin roll casting (TRC) was investigated. It was observed that two kinds of nanoclusters, cluster(1) and cluster(2), play an important role in the bake-hardening properties of Al-Mg-Si aluminum alloy. The hardness of..... More

      
Mechanical Properties of Discontinuous Precipitated Al-Zn Alloys after Drawing at Room and Cryogenic Temperatures
불연속 석출된 Al-Zn 합금의 상온 및 극저온 인발에 따른 미세조직 변화가 기계적 특성에 미치는 영향
Min Soo Kim, Seung Zeon Han, Jehyun Lee, Sung Hwan Lim, Jee Hyuk Ahn, Sang-Shik Kim, Kwang Ho Kim
김민수, 한승전, 이재현, 임성환, 안지혁, 김상식, 김광호
Korean J. Met. Mater. 2017;55(2):77-84.   Published online 2017 Feb 2
DOI: https://doi.org/10.3365/KJMM.2017.55.2.77

Abstract
In order to study the effect of microstructural change on the tensile properties of discontinuous precipitated Al-Zn binary alloy, four different Al-Zn alloys(25, 30, 35, 45 wt% Zn) were aged at 160 ℃ for different aging times(0, 5, 15, 30, 60, 120, 360 min) after being solution treated at 400..... More

         Cited By 1
Effect of Second Aging Treatment on the Microstructure and Mechanical Properties of SUH660 Alloy
SUH660합금의 미세조직 및 기계적 특성에 미치는 2차 시효 열처리의 영향
Do-Hoon Kim, You-Hwan Lee, Jeoung Han Kim
김도훈, 이유환, 김정한
Korean J. Met. Mater. 2016;54(10):716-722.   Published online 2016 Oct 5
DOI: https://doi.org/10.3365/KJMM.2016.54.10.716

Abstract
nSUH660 is a precipitation hardening stainless steel which has high strength at moderately high temperature. In this study, the effect of a secondary aging-treatment after the standard 720 °C heat-treatment was investigated. The Rockwell C hardness test with detailed TEM observerations was performed to study the steel’s hardening mechanism. The..... More

         Cited By 1
1 |
E-Submission
Email Alert
Author's Index
Specialties
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community