| Home | E-Submission/Review | Sitemap | Editorial Office |  
Korean Journal of Metals and Materials Search > Browse Articles > Search

Mechanical Performance and Microstructure of Resistance Element Welds of Dissimilar Metals Created with a Headless Rivet
Young Hyun Oh, Hyun Jung Ryu, Taejung Kim, Minsu Choi, Taeseon Lee
Korean J. Met. Mater. 2019;57(11):708-714.   Published online 2019 Oct 8
DOI: https://doi.org/10.3365/KJMM.2019.57.11.708

Resistance Element Welding (REW) is a novel processing technology developed to join dissimilar materials such as aluminum and steel. It uses an auxiliary steel rivet (element) inserted into an aluminum sheet that forms a resistance spot weld with the steel sheet, and the aluminum work piece is mechanically joined by..... More

                           Cited By 1
Effects of Heat Treatment and Thermal Cycle Conditions on the Bonding Strength and Interfacial Characteristics of Electroplated Cr/Electroplated Ni-P Coatings
열처리 및 열 사이클 조건에 따른 전해 Cr/전해 Ni-P 도금의 접합강도 평가 및 계면분석
Jina Lee, Kirak Son, Myung-Hee Choi, Kyu Hwan Lee, Young-Bae Park
이진아, 손기락, 최명희, 이규환, 박영배
Korean J. Met. Mater. 2018;56(4):280-288.   Published online 2018 Apr 5
DOI: https://doi.org/10.3365/KJMM.2018.56.4.280

The effects of heat treatment and thermal cycle conditions on the bonding strength and interfacial characteristics of electroplated Cr/electroplated Ni-P coatings were systematically evaluated. With step1 samples, heat treatment was performed at 750 oC for 6 hours after successive electroplating of Ni-P and Cr layers. With step2 samples, 1st heat..... More

Effects of Welding Consumables on the Solidification Cracking in SAW Weld Metal of Medium Carbon Steel
중탄소강 SAW 용접금속의 응고 균열 발생에 미치는 용접재료의 영향
Kook-soo Bang, Woo-hyun Song, Hong-chul Jung
방국수, 송우현, 정홍철
Korean J. Met. Mater. 2018;56(2):137-145.   Published online 2018 Feb 5
DOI: https://doi.org/10.3365/KJMM.2018.56.2.137

The effects of submerged-arc welding consumables, wire and flux, on solidification cracking in the weld metal of medium-carbon steel were investigated. It showed that weld metal with a greater amount of C, S, and P had a wider brittleness temperature range, BTR, which resulted in longer total and maximum crack..... More

Study on the Part Unit Corrosion Evaluation for Automotive Lower Arm Using Electrochemical Cyclic Corrosion Test
전기화학적 순환부식 시험법을 활용한 자동차 로어암의 단품단위 부식평가에 관한 연구
Seon-Hong Kim, Ji-Hoon Lee, Jung-Gu Kim, Min Jang
김선홍, 이지훈, 김정구, 장민
Korean J. Met. Mater. 2018;56(2):103-112.   Published online 2018 Feb 5
DOI: https://doi.org/10.3365/KJMM.2018.56.2.103

This research focused on the development of the part unit evaluation for an organic coated automotive lower arm using the electrochemical cyclic corrosion test (E-CCT). The E-CCT accelerates both the coating degradation and the perforation corrosion. The applied potential for the coating degradation was determined to be -500 mVSCE for..... More

Effect of Oxygen Content on the Phase Transformation of Ti-5Al-2.5Fe Alloy During Continuous Cooling
연속냉각 중 산소함량이 Ti-5Al-2.5Fe 합금의 상변태 거동에 미치는 영향
Do-Heon Kim, Jong Woo Won, Dae-Won Jeong, Hak-Sung Lee, Seog-Young Yoon, Yong-Taek Hyun
김도헌, 원종우, 정대원, 이학성, 윤석영, 현용택
Korean J. Met. Mater. 2017;55(9):600-608.   Published online 2017 Aug 30
DOI: https://doi.org/10.3365/KJMM.2017.55.9.600

The effects of oxygen content on the β to α phase transformation of the Ti-5Al-2.5Fe alloy during continuous cooling were investigated by varying the oxygen content between 0.08 – 0.41 wt%. Dilatometer tests were performed at cooling rates of 0.05 – 100 ℃/s combined with microstructure observation to examine phase..... More

Effect of Mn, Si, and Sb on High-temperature Oxidation of Fe-Mn-Al-Si-Sb-C Steels
Fe-Mn-Al-Si-Sb-C 강의 고온산화에 미치는 Mn, Si, Sb 첨가효과
Soon Yong Park, Dong Bok Lee
박순용, 이동복
Korean J. Met. Mater. 2017;55(5):308-314.   Published online 2017 May 9
DOI: https://doi.org/10.3365/KJMM.2017.55.5.308

High Mn twinning-induced plasticity (TWIP) steels with compositions of Fe-(18.0-18.17) Mn-1.51Al-(0.48-0.52)Si-(0.61-0.62)C-(0.52-0.54)Cr-(0.22-0.23)Ni-0.03Nb-(0-0.04)Sb (wt%) are oxidized at 650 ℃ and 750 ℃ for < 24 h in air in order to determine the effect of the alloying elements on the oxidation. They are oxidized parabolically to MnO2,Mn2O3,FeO,Fe2O3, and FeMn2O4 oxides with relatively..... More

         Cited By 1
The Effect of Al and V on Microstructure and Transformation of Phase during Solution Treatments of Cast Ti-6Al-4V Alloy
Seong-Tak Oh, Kee-Do Woo, Jae-Hwang Kim, Seung-Mi Kwak
Korean J. Met. Mater. 2017;55(3):150-155.   Published online 2017 Mar 3
DOI: https://doi.org/10.3365/KJMM.2017.55.3.150

In this study, the effect of α and β those stabilizers on the microstructure and phase transformation of cast Ti-6wt%Al-4wt%V alloy at various solution treatment temperatures was investigated. The dependence of the transformation behavior of the β phase during the solution treatment and its dependence was determined by the partitioning..... More

Analysis of Deformation and Failure Behaviors of TIG Welded Dissimilar Metal Joints Using Miniature Tensile Specimens
소형 인장시편을 이용한 TIG 용접된 이종금속 접합부의 변형 및 파괴거동 분석
Ji-Hwan Shin, Nabeel Jahanzeb, Min-Seong Kim, Ji-Hyun Hwang, Shi-Hoon Choi
신지환, Nabeel Jahanzeb, 김민성, 황지현, 최시훈
Korean J. Met. Mater. 2017;55(2):125-131.   Published online 2017 Feb 2
DOI: https://doi.org/10.3365/KJMM.2017.55.2.125

The deformation and failure behaviors of dissimilar metal joints between SS400 steel and STS316L steel were investigated. The dissimilar metal joints were fabricated using the tungsten inert gas (TIG) welding process with STS309 steel as a filler metal. The microstructures of the dissimilar metal joints were investigated using an optical..... More

         Cited By 3
Effect of Heat Treatment on the Diffusion-Bonded Ni-Base Alloy Hastelloy X
확산접합된 Ni기 합금 Hastelloy X에 미치는 후열처리 영향
Injin Sah, Jong-Bae Hwang, Sun-Ig Hong, Eung-Seon Kim, Min-Hwan Kim
사인진, 황종배, 홍순익, 김응선, 김민환
Korean J. Met. Mater. 2017;55(2):115-124.   Published online 2017 Feb 2
DOI: https://doi.org/10.3365/KJMM.2017.55.2.115

The effect of post-bond heat treatment (PBHT) on diffusion-bonded polycrystalline Ni-base alloy Hastelloy X (Ni-22Cr-18Fe-8Mo) was evaluated in this study. Diffusion bonding was conducted under a compressive pressure of 14 MPa in the temperature range of 1100-1200 ℃. While (Cr,Mo)-rich and (Mo,Si)-rich precipitates were developed along the interface at 1100..... More

         Cited By 1
Plastic Working & Materials Processing
The Effect of Mixed Slurry of Fe and Graphite on the Characteristics of Laser Carburized Surface
레이저 침탄공정시 철과 흑연의 혼합 슬러리가 침탄특성에 미치는 효과
Won-Jong Ji, Seong-Hoon Lee, Young-Hoon Moon
지원종, 이성훈, 문영훈
Korean J. Met. Mater. 2017;55(1):16-23.   Published online 2017 Jan 5
DOI: https://doi.org/10.3365/KJMM.2017.55.1.16

Laser surface carburizing can be achieved by a laser alloying mechanism, which includes melting the graphite coated substrate and dissolution of the graphite in the liquid state. The drawback of laser carburizing is that process-induced cracks frequently form on the carburized surface as a result of carbon enrichment and the..... More

         Cited By 3
Technical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars
내진용 고강도 철근의 제조와 기술 개발 동향
Byoungchul Hwang, Jae-Hyeok Shim, Myoung-Gyu Lee, Joonho Lee, Jun-Ho Jung, Bo-Sung Kim, Sung-Bin Won
황병철, 심재혁, 이명규, 이준호, 정준호, 김보성, 원성빈
Korean J. Met. Mater. 2016;54(12):862-874.   Published online 2016 Dec 5
DOI: https://doi.org/10.3365/KJMM.2016.54.12.862

Since reconstruction of old town in Korea requires high-rise and seismic design construction, many attentions have been paid to high strength seismic reinforced steel bar. In the present paper, technical developments and trends are summarized for developing next-generation seismic reinforced steel bar of grade 700 MPa. Steelmaking process requires high..... More

         Cited By 4
Evaluation of Material Properties on the Inner Surface of Cr Plated Cladding Tube for Preventing Fuel-Cladding Chemical Interaction
FCCI 방지를 위한 내면 Cr 도금 피복관의 물성 평가
Jun Hwan Kim, Byoung Oon Lee, Jin Sik Cheon, Sung Ho Kim
김준환, 이병운, 천진식, 김성호
Korean J. Met. Mater. 2016;54(11):855-861.   Published online 2016 Nov 5
DOI: https://doi.org/10.3365/KJMM.2016.54.11.855
Studies were carried out to apply electroplating technique to the inner surface of a nuclear fuel cladding tube to prevent a fuel-cladding chemical interaction (FCCI) in a sodium-cooled fast reactor (SFR). 20 μm thick Cr was uniformly plated onto the inner surface of a HT9 cladding tube with a 7.4... More
         Cited By 1
Effect of Strength Coefficient of Bainite on Micromechanical Deformation and Failure Behaviors of Hot-Rolled 590FB Steel during Uniaxial Tension
열연 590FB강의 일축인장 시 미소역학적 변형거동 및 파괴거동에 미치는 베이나이트의 강도계수의 영향
Eun-Young Kim, Sung Il Kim, Shi-Hoon Choi
김은영, 김성일, 최시훈
Korean J. Met. Mater. 2016;54(11):808-816.   Published online 2016 Nov 5
DOI: https://doi.org/10.3365/KJMM.2016.54.11.808

The effect of the strength coefficient (KB) of bainite on micromechanical deformation and failure behaviors of a hot-rolled 590MPa steel (590FB) during uniaxial tension was simulated using the elasto-plastic finite element method (FEM). The spatial distribution of the constituent phases was obtained using a phase identification technique based on optical..... More

         Cited By 6
Experimental and Simulation Analysis of Hot Isostatic Pressing of Gas Atomized Stainless Steel 316L Powder Compacts
Dongguo Lin, Sangyul Ha, Youngho Shin, Dong Yong Park, Seong Jin Park, Sung Taek Chung, Ravi Bollina, Seongkyu See
Korean J. Met. Mater. 2016;54(10):732-742.   Published online 2016 Oct 5
DOI: https://doi.org/10.3365/KJMM.2016.54.10.732

In this work, both experimental and numerical studies were conducted to investigate the densification behavior of stainless steel 316L (STS 316L) powders during hot isostatic pressing (HIP), and to characterize the mechanical properties of HIPed specimens. The HIP experiments were conducted with gas atomized STS 316L powders with spherical particle..... More

         Cited By 3
Materials Analysis & Characterization
Serial Sectioning and Reconstruction Techniques for Three-Dimensional Microscopy of Metallic Materials
금속 미세조직의 3차원 이미지 관찰을 위한 순차적 박리 및 재구성 기술
Su-Hyeon Kim, Youngmok Rhyim
김수현, 임영목
Korean J. Met. Mater. 2016;54(9):698-710.   Published online 2016 Sep 5
DOI: https://doi.org/10.3365/KJMM.2016.54.9.698

Experimental techniques for serial sectioning and reconstruction were investigated in the three-dimensional imaging of microstructures in metallic materials. Mechanical polishing equipped with a light optical microscope and a digital image processor was used for the serial sectioning and reconstruction. Different processing conditions were investigated for three different alloys: Al-Si alloy,..... More

         Cited By 3
Casting/Solidification/Heat Treatment
Microstructure and Mechanical Properties of Inconel 625 Alloy on Low Carbon Steel by Heat Treatment after Overlay Welding
저합금강의 인코넬 625 육성용접 후 열처리에 따른 미세조직 및 기계적 특성
Seungpil Kim, Jaeho Jang, Jungsoo Kim, Byung Jun Kim, Keun Yong Sohn, Dae-Geun Nam
김승필, 장재호, 김정수, 김병준, 손근용, 남대근
Korean J. Met. Mater. 2016;54(8):585-591.   Published online 2016 Aug 5
DOI: https://doi.org/10.3365/KJMM.2016.54.8.585
Overlay welding technique is one of methods used to improve metal mechanical properties such as strength, toughness and corrosion resistance. Generally, Inconel 625 alloy is used for overlay welding layer on low carbon steels for economic consideration. However, the method produces some problems in the microstructure of the cast structure... More
         Cited By 1
Powder Metallurgy
Microstructure Changes of ZrO<sub>2</sub>/W/Mo Coating Layers on Graphite after Heat Treatment at 2100
용사 코팅한 ZrO2/W/Mo-Graphite 코팅층의 2100 ℃ 열처리 후 미세조직 변화에 관한 연구
Gyu Baek Ahn, Kyeong Hwan Choe, Sang Sub Kim, Gue Serb Cho
안규백, 최경환, 김상섭, 조규섭
Korean J. Met. Mater. 2016;54(8):559-565.   Published online 2016 Aug 5
DOI: https://doi.org/10.3365/KJMM.2016.54.8.559

A tungsten coating was deposited onto a graphite substrate using the atmospheric plasma spraying (APS) technique. In order to increase the adhesion strength between the metallic tungsten(W) and graphite, a molybdenum (Mo) interlayer was pre-deposited onto the graphite surface by utilizing the APS technique. Also, after deposition of a APS-W..... More

         Cited By 4
1 |
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community