| Home | E-Submission/Review | Sitemap | Editorial Office |  
top_img
Korean Journal of Metals and Materials Search > Browse Articles > Search



Changes in Microstructure, Mechanical and Electrical Properties with Progress of Cold Wire-Drawing for AA1070
Sang-Hyeon Jo, Seong-Hee Lee
Korean J. Met. Mater. 2023;61(11):867-873.   Published online 2023 Oct 29
DOI: https://doi.org/10.3365/KJMM.2023.61.11.867

Abstract
Commercial AA1070 alloy for electrical wire is severely deformed by the drawing process when a rod with a diameter of 2 mm is greatly reduced to 0.4 mm by multi-pass. Changes in the microstructure, mechanical properties, and electrical properties of the Al alloy during the wire-drawing process were investigated in..... More

                
Electrical and Mechanical Properties of Polymer Composite through the Use of Single-Walled Carbon Nanotube and Multi-Walled Carbon Nanotube
단일벽 탄소나노튜브와 다중벽 탄소나노튜브 사용에 따른 고분자 복합체의 기계적, 전기적 물성
Byung-Ho Kang, Oh-Nyoung Hur, Soon-Kook Hong, Sung-Hoon Park
강병호, 허오녕, 홍순국, 박성훈
Korean J. Met. Mater. 2022;60(9):694-700.   Published online 2022 Aug 30
DOI: https://doi.org/10.3365/KJMM.2022.60.9.694

Abstract
To manufacture composites with required properties, it is extremely important to select an appropriate filler. Carbon-based nano materials such as carbon black, graphene and carbon nanotube (CNT) have been extensively investigated as reinforcing and conducting fillers. Because of their high aspect ratio coupled with superior physical properties, 1-dimensional CNTs are..... More

                   Web of Science 4  Crossref 5
Influence of Film Thickness on the Electrical and Optical Properties of ZnO/Ag/SnO<sub>2</sub> Tri-Layer Films
ZnO/Ag/SnO2 적층박막의 두께 변화에 따른 전기적, 광학적 특성 연구
Yu-Sung Kim, Jin-Young Choi, Yun-Je Park, Su-Hyeon Choe, Young-Min Kong, Daeil Kim
김유성, 최진영, 박윤제, 최수현, 공영민, 김대일
Korean J. Met. Mater. 2019;57(5):324-327.   Published online 2019 May 5
DOI: https://doi.org/10.3365/KJMM.2019.57.5.324

Abstract
ZnO/Ag/SnO2 (ZAS) tri-layer films were prepared on glass substrates via RF and DC magnetron sputtering, and then the influence of the thickness of the ZnO and SnO2 layers on the optical and electrical properties of the ZAS films was investigated. As deposited ZnO 50 nm/Ag 10 nm/SnO2 50 nm films..... More

                   Web of Science 6  Crossref 7
Fabrication of Si/SiO<sub>x</sub> Anode Materials by a Solution Reaction-Based Method for Lithium Ion Batteries
Hyeon-Woo Yang, Jung-Ho Lee, Sang-Chul Jung, Seung-Taek Myung, Woo-Seung Kang, Sun-Jae Kim
Korean J. Met. Mater. 2016;54(10):780-786.   Published online 2016 Oct 5
DOI: https://doi.org/10.3365/KJMM.2016.54.10.780

Abstract
Si/SiOx composite anodes were prepared using a facile solution reaction-based method. Their initial capacity was significantly improved to 1.3 times that of SiOx by incorporating 3 wt% silicon nanoparticles into the SiOx. The capacity retention of the Si/SiOx anodes after 50 charge-discharge cycles was significantly enhanced, to 99%, compared with..... More

       Crossref 5
Effect of Post-Deposition Annealing on the Structural, Optical and Electrical Properties of Ti-doped Indium Oxide Thin Films
Sung-Bo Heo, Hyun-Joo Moon, Jeong-Hyeon Oh, Young-Hwan Song, Tae-Young Eom, Jun-Ho Kim, Daeil Kim
Korean J. Met. Mater. 2016;54(10):775-779.   Published online 2016 Oct 5
DOI: https://doi.org/10.3365/KJMM.2016.54.10.775

Abstract
Ti-doped In2O3 (TIO) thin films were deposited on glass substrates by RF magnetron sputtering. The films were then annealed at 100, 200 or 300 °C for 30 min to investigate the effects of the annealing temperature on the films’ structural, electrical and optical properties. The films annealed at 200 °C..... More

       Crossref 1
Electronic Materials
Enhanced Optical and Electrical Properties of TiO<sub>2</sub> Buffered IGZO/TiO<sub>2</sub> Bi-Layered Films
Hyun-Joo Moon, Daeil Kim
Korean J. Met. Mater. 2016;54(8):605-608.   Published online 2016 Aug 5
DOI: https://doi.org/10.3365/KJMM.2016.54.8.605

Abstract
In and Ga doped ZnO (IGZO, 100-nm thick) thin films were deposited by radio frequency magnetron sputtering without intentional substrate heating on a bare glass substrate and a TiO2-deposited glass substrate to determine the effect of the thickness of a thin TiO2 buffer layer on the structural, optical, and electrical..... More

       Crossref 1
1 |
E-Submission
Email Alert
Author's Index
Specialties
Journal Impact Factor 1.2
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
KOFST
COPE
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-2-557-1071   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials.                 Developed in M2PI