| Home | E-Submission/Review | Sitemap | Editorial Office |  
Korean Journal of Metals and Materials Search > Browse Articles > Search

Microstructural Evolution with Solidification Rate and Heat-Treatment of Single Crystal Superalloy CMSX-4 Grown using Seed
Seed를 이용한 단결정 초내열합금 CMSX-4에서 응고속도 및 열처리에 따른 미세조직 변화
Suncheol Kwon, Jongho Shin, Geunyoung Rim, Gitae Sung, Byunggwan Yoon, Euisuk Jung, Jehyun Lee
권순철, 신종호, 임근영, 성기태, 윤병관, 정의석, 이재현
Korean J. Met. Mater. 2018;56(10):745-754.   Published online 2018 Oct 5
DOI: https://doi.org/10.3365/KJMM.2018.56.10.745

The CMSX-4 superalloy including refractory elements was directionally solidified using the seed of a [001] single crystal to control the growth direction to [001], where solidification velocity was changed from 25 to 160 μm/s. In the log-log plot between spacing and solidification velocity, the primary dendrite arm spacing and secondary..... More

Prediction of Primary Dendrite Arm Spacing with Solidification Velocity and Temperature Gradient during Directional Solidification in CMSX-4 Superalloy
CMSX-4 초내열합금에서 일방향 응고속도와 온도경사의 변화에 따른 1차 수지상 간격 예측
Jongho Shin, Changhoon Sung, Suncheol Kwon, Sukhwan Kwon, Byungmoon Chang, Jehyun Lee
신종호, 성창훈, 권순철, 권석환, 장병문, 이재현
Korean J. Met. Mater. 2018;56(9):674-679.   Published online 2018 Sep 5
DOI: https://doi.org/10.3365/KJMM.2018.56.9.674

Directional solidification experiments were carried out to estimate the effect of solidification velocity and temperature gradient on primary dendrite arm spacing (PDAS) in the Ni-based superalloy, CMSX-4 alloy. The specimens were solidified at velocities of 1, 5, 25, 50 and 100 mm/s under given temperature gradients of 12.5, 18, 23..... More

Formation of Delta Ferrite with Solidification Rates in 10Cr1MoW Steel
10Cr1MoW강에서 응고속도에 따른 δ 페라이트 형성거동
Suncheol Kwon, Yunkon Joo, Changhoon Sung, Myunggyun Son, Jongho Shin, Seongmoon Seo, Jehyun Lee
권순철, 주윤곤, 성창훈, 손명균, 신종호, 서성문, 이재현
Korean J. Met. Mater. 2018;56(8):589-596.   Published online 2018 Aug 5
DOI: https://doi.org/10.3365/KJMM.2018.56.8.589

Martensitic 10Cr1MoW steels are widely used for high temperature components in turbine engines because they have good mechanical properties and corrosion resistance. Delta-ferrite can form locally in large ingots and the ferrite phase degrades the metal’s high-temperature properties. To decrease the fraction of delta-ferrite the solidification process should be controlled...... More

Enhanced Mechanical Properties by Directional Solidification and Cold Drawing in Cu Added Zn-Al Alloys
Cu가 첨가된 Zn-Al 합금에서 일방향응고 및 냉간인발에 따른 기계적 특성 향상
Hae Chang Jeong, Min Soo Kim, Jee Hyuk Ahn, Sung Hwan Lim, Seung Zeon Han, Jehyun Lee, Kwang Ho Kim
정해창, 김민수, 안지혁, 임성환, 한승전, 이재현, 김광호
Korean J. Met. Mater. 2017;55(8):529-536.   Published online 2017 Aug 1
DOI: https://doi.org/10.3365/KJMM.2017.55.8.529

The lamellar structure of two phases, the Zn-rich and Al-rich phases, is formed in a Zn-5 wt% Al eutectic alloy. In order to study the effect of microstructural changes on the tensile properties of eutectic Zn-Al binary alloy, Zn-Al and Zn-Al-Cu alloys were directionally solidified at a growth rate of..... More

1 |
Email Alert
Author's Index
Impact factor
The Korean Institute of Metals and Materials
SCImago Journal & Country Rank
Similarity Check
Crossref Cited-by Linking
Editorial Office
The Korean Institute of Metals and Materials
6th Fl., Seocho-daero 56-gil 38, Seocho-gu, Seoul 06633, Korea
TEL: +82-70-4266-1646   FAX: +82-2-557-1080   E-mail: metal@kim.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Institute of Metals and Materials. All rights reserved.                 Developed in M2Community