Abstract
Stainless steel-based composites (SMCs) mixed with 316L stainless steel powder and Fe-Cr-B based M alloys powder ed M) powder were manufactured using the powder injection molding (PIM) process, and their microstructure and mechanical properties were investigated. To examine the effect of M content on the properties of SMCs, the M..... More

Abstract
This study investigated the microstructure and room temperature mechanical properties of W-7Ni-3Fe (wt%) tungsten heavy alloy (as-fabricated) which was manufactured by metal injection molding (MIM). To identify the effect of heat treatment on the W-7Ni-3Fe alloy, its properties were compared after heattreatment (1,100 oC for 1 hour) in vacuum atmosphere...... More

Abstract
This study investigated the microstructure and mechanical properties of 17-4PH precipitation hardened martensite stainless steel and Fe-Cr-B based alloy mixed material manufactured using powder injection molding. 17-4PH stainless steel powder was mixed with 5 wt%, 10 wt% and 20 wt% Fe-Cr-B based alloy (M alloy) powder to manufacture three different..... More

Abstract
This study investigated the microstructure and the ambient-elevated temperature compression and elevated temperature creep properties of Fe-14Cr ferritic ODS steel manufactured by mechanical alloying (high energy ball milling) and hot extrusion processes. Initial microstructural observation of the as-extruded material identified elongated grains in the direction of extrusion; however, some recrystallization..... More