|
Home
|
E-Submission/Review
|
Sitemap
|
Editorial Office
|
목적 및 범위
Aims and Scope
저널 정보
About the Journal
편집위원회
Editorial Board
Open Access
편집국
Editorial Office
논문투고안내
Instructions for Authors
연구윤리규정
Research and Publication Ethics
필수 점검 사항
Checklist
논문투고사이트
E-Submission
저작권이양동의서
Copyright Transfer Agreement
발간호 검색
All issues
출판전 논문
Online First
현재 발행 호
Current Issue
많이 읽힌 논문
Most Read Articles
많이 인용된 논문
Most Cited Articles
개별 논문 검색
Korean J. Met. Mater.
Search
저자 색인
Author Index
Author Index
> Browse Articles > Author Index
Author is indexed since 2016
Author :
Jae-Gil Jung
4 Articles
533
Investigation on the Structural and Mechanical Properties of Al Foam Manufactured by Spark Plasma Sintering and Compression Molding Methods
방전 플라즈마 소결과 압축 성형 방법으로 제조된 알루미늄 다공체의 구조적, 기계적 특성 연구
Seunghyeok Choi, Sang-Hwa Lee, Jae-Gil Jung, Seok-Jae Lee, Tae-Young Ahn, Yu-Song Choi, Seung Bae Son최승혁, 이상화, 정재길, 이석재, 안태영, 최유송, 손승배
Korean J. Met. Mater.
2024;62(7):533-541. Published online 2024 Jun 28
DOI:
https://doi.org/10.3365/KJMM.2024.62.7.533
Abstract
Metal foam materials are used for various purposes including electrode materials, catalyst filters, and gas diffusion filters due to their porous structure. Increasing demand for metal foams has generated research to increase porosity as well as produce different pore sizes. The present paper illustrates a comparison of open-cell aluminum foams...
More
396
Influence of Ultrasonic Melt Treatment and Cooling Rates on the Microstructural Development and Elevated Temperature Mechanical Properties of a Hypereutectic Al-18Si-4Cu-3Ni Piston Alloy
초음파 용탕 처리 및 냉각속도가 Al-18Si-4Cu-3Ni 피스톤용 합금의 미세조직과 고온인장특성에 미치는 영향
Jea-Hee Yoon, Young-Hee Cho, Jae-Gil Jung, Jung-Moo Lee, Ik Min Park윤재희, 조영희, 정재길, 이정무, 박익민
Korean J. Met. Mater.
2017;55(6):396-404. Published online 2017 Jun 1
DOI:
https://doi.org/10.3365/KJMM.2017.55.6.396
Abstract
The influence of ultrasonic melt treatment (UST) combined with a change in cooling rates on the microstructure and elevated temperature mechanical properties of a hypereutectic Al-18Si-4Cu-3Ni piston alloy was investigated. Microstructural observation confirmed that UST effectively refined the sizes of primary Si and intermetallic compounds (e.g. ε-Al
3
Ni) while promoting their.....
More
Crossref 2
240
The Effect of Ultrasonic Melt Treatment on the Microstructure and Mechanical Properties of Al-7Si-0.35Mg Casting Alloys
초음파 용탕 처리가 Al-7Si-0.35Mg 알루미늄 합금의 미세조직 및 기계적 특성에 미치는 영향
Soo-Bae Kim, Young-Hee Cho, Jung-Moo Lee, Jae-Gil Jung, Su Gun Lim김수배, 조영희, 이정무, 정재길, 임수근
Korean J. Met. Mater.
2017;55(4):240-246. Published online 2017 Apr 6
DOI:
https://doi.org/10.3365/KJMM.2017.55.4.240
Abstract
The effect of ultrasonic melt treatment (UST) on the microstructure and mechanical properties of Al-7Si-0.35Mg (A356) casting alloys was investigated. The particular aim of this study was to analyze the mechanism involved in the strengthening of the A356 alloys when fabricated by UST. The UST had little effect on the.....
More
Crossref 5
Journal Impact Factor 1.1
> Browse Articles > Author Index
